Intermec CK60 Vehicle Dock Manuel utilisateur

The Intermec CK60 Vehicle Dock:

• provides power and charges the battery pack for the CK60 Handheld Computer.

• secures CK60 Handheld Computer in dock while vehicle is in motion.

• provides an RS-232 serial connector for serial scanners, printers, and other devices.

• USB A Host connection allows connection of peripheral devices such as keyboards to

the CK60 Handheld Computer.

The CK60 Vehicle Dock shipping box should contain these items:

• CK60 Vehicle Dock

• CK60 Vehicle Dock Quick Start Guide

• Product Warranty Card and Compliance Statement

What You Need

To Install and use the CK60 Vehicle Dock, you need:

• Intermec cabling kits to connect Vehicle Dock to vehicle power source. Your Intermec

sales team will be able to assist you with kit requirements. The Vehicle Dock may be

used with or without an external power connection. Using without a power cable, the

mobile computer is not charged while docked.

• Intermec Vehicle Dock Mounting Kit (p/n: 805-638-001) allows mounting of the vehi-

cle dock in a truck cab or forklift. This mounting kit is specifically selected for use with

the Vehicle Dock and is designed to reduce the amount of vibration transferred to the

mobile computer. Substitution of mounting devices or methods not approved by

Intermect is not recommended.

• Data Cables, as required by your application.

Out of the Box CK60 Vehicle Dock Features

CK60 Handheld Computer

Release button

Handheld computer

holding bay

CK60 Vehicle Dock Front View

protection bumpers

Docking connector

Handheld computer retaining

assembly

CK60 Vehicle Dock Features

Mounting kit attachment

CK60 Vehicle Dock Rear View

location area

Environmental Specifications

Operating Temperature: -20°C to +50°C (-4°F to +122°F)

Storage temperature: -30°C to 70°C (-22°F to +158°F)

Relative Humidity: 5% to 95%

USB Host Micro DB9F Connector Pin Outs

Serial RS-232 DB9M Connector Pin Outs

CK60 Vehicle Dock

Pin Number Signal Name I/O to Computer Description

1 USBH_D- I/O USB Host data negative

2USBH_D+ I/O USB Host data positive

3NC

4NC

5GNDPWR

6NC Ethernet receive negative

7NC

8NC

9 VBUS PWR PWR_OUT to power USB peripherals

Shell C-GND PWR Chassis Ground

Pin Number Signal Name I/O to Computer Description

1 DCD I RS-232 Data carrier detect

2RXD IRS-232 Receive data

3 TXD O RS-232 Transmit data

4DTR ORS-232 Data terminal ready

5 GND PWR Signal Ground

6DSR IRS-232 Data set ready

7 RTS O RS-232 Request to send

8CTS IRS-232 Clear to send

9 POWER PWR 5 volts @ .5 Amps 2.5 Watts

Shell C-GND PWR Chassis Ground

Corporate Headquarters

6001 36th Avenue West

Everett, Washington 98203 U.S.A.

tel 425.348.2600

www.intermec.com

CK60 Vehicle Dock Quick Start Guide

930-006-001*

P/N 930-006-001

Quick Start Guide

Installing Your CK60 Vehicle Dock

1Install Vehicle Dock and Mounting Kit to your vehicle in a location that is conve-

nient to the operator but does not interfere with vehicle operation or operator

safety. See instructions included with Mounting Kit for details.

2Connect power cable to the power cable connector on the bottom of the Vehicle

Dock. See instructions included with the applicable Power Cable Kit for detail.

3Connect data cables if applicable.

• Five (5) volts DC is provided on the RS232 serial connector to power selected

Intermec tethered scanners.

• The USB Adapter Cable (p/n: 236-051-001) is required to connect a standard

USB-A male cable to the Intermec special connector.

• This cable is required only if you want to attach a USB device.

Cable Connectors

Installing Your CK60 into the CK60

Vehicle Dock

1 Using your thumb, press the CK60 Handheld Computer release button to lift up

the retaining bar.

2Line the CK60 Handheld Computer over the docking connector and push your

CK60 down until it is securely seated on the connector.

3Position your hand in the middle of the Retaining Bar and push down to secure

the CK60 Handheld Computer. Power is provided to your CK60 Handheld Com-

puter only when the retaining bar is secured.

Removing Your CK60 from the CK60 Vehi-

cle Dock

1 Using your thumb, press the CK60 Handheld Computer release button.

2Lift the CK60 Handheld Computer straight up from the connector.

Vehicle power

Serial connector

USB micro DB9 connector

source connector

CK60 Vehicle Dock Bottom View

Retaining bar must be depressed and engaged to properly secure your

CK60 Handheld Computer before moving your vehicle. Failure to secure

your CK60 Handheld Computer could result in serious injury.

Handheld retaining bar

Press with your thumb

Push down in middle to properly secure CK60 in bay

to release button

Handheld retaining bar

assembly

Release button

CK30 Handheld Computer Quick Start Guide

CK60 Vehicle Dock Installation Instructions

Table des matières

Autres manuels Intermec Station d'accueil

Intermec

Intermec FlexDock DX4 Manuel utilisateur

Intermec

Intermec AV11 Manuel utilisateur

Intermec

Intermec CN3 Series Manuel utilisateur

Intermec

Intermec AD11 Manuel utilisateur

Intermec

Intermec 700 Series Manuel utilisateur

Intermec

Intermec AV6 Manuel utilisateur

Intermec

Intermec D5020 Guide de démarrage rapide

Intermec

Intermec AV6 Manuel utilisateur

Intermec

Intermec FlexDock DX1 Manuel utilisateur

Intermec

Intermec AV10 Manuel utilisateur

Intermec

Intermec AD1 Manuel utilisateur

Intermec

Intermec JD2010 Manuel utilisateur

Intermec

Intermec AV5 Manuel utilisateur

Intermec

Intermec 700 Series 700 Manuel utilisateur

Intermec

Intermec FlexDock DX1 Manuel utilisateur

Intermec

Intermec CN2 Manuel utilisateur

Intermec

Intermec CK60 Ethernet Multidock Manuel utilisateur

Intermec

Intermec Trakker Antares 2400 Manuel utilisateur

Intermec

Intermec AD10 Manuel utilisateur

Intermec

Intermec CN3 Series Manuel utilisateur

Intermec

Intermec AD24 Manuel utilisateur

Intermec

Intermec FlexDock DX4 Manuel utilisateur

Intermec

Intermec CK60 Ethernet Multidock Manuel utilisateur

Intermec

Intermec AD10 Manuel

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur