Intellinet 523929 Manuel utilisateur

Fast

EthErnEt

OFFicE

switch

usEr

manual

MODEL 523929

INT-523929-UM-1107-01

intrOductiOn

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

Fast Ethernet Ofce Switch, Model 523929.

This 24-port rackmount device is a high-performance 10/100 Mbps LAN

switch with auto-sensing and auto negotiation on every port. The space-

saving, cost-effective design allows you to connect up to 24 devices to

your local area network while only taking up one slot in your network

rack or cabinet. The two Gigabit combo ports let you connect other

switches using RJ45 ports or SFP modules.

Easy-to-follow instructions make installation of the switch quick and simple,

so you’ll also soon be enjoying the benets of these additional features:

FCC Warning

This device has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses and radiates radio frequency energy and, if

not installed and used in accordance with the user manual, may cause

interference, which the user will be required to correct at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to take

adequate measures to correct.

INTRODUCTION

• Supports NWay auto-negotiation

• Store and forward switching

architecture

• Full/half duplex operation

• Supports 802.3x ow control for

full duplex mode and collision-

based backpressure for half

duplex mode

• Wire-speed packet ltering and

forwarding rate

• Supports up to 8192 MAC address

entries

• 320 kBytes buffer memory

• Included 19” rackmount brackets

• Lifetime Warranty

CONNECTIONS/INDICATORS

cOnnEctiOns & indicatOrs

LEDs

The front panel LED indicators

provide at-a-glance network

status and real-time connectivity

info, as detailed in the chart

below. NOTE: The mini-GBIC

slots share

LEDs with

the Gigabit

RJ-45

(copper)

ports:

25X/26X.

Port LED Status Operation

Power Green The switch is on.

10/100 Link/ Green Valid port connection.

Mbps ACT Blinking Data is being transmitted/received.

Off Port is disconnected.

10/100/ 1000M Green Valid port connection at 1000 Mbps.

1000 Blinking Data is being transmitted/received.

Mbps Off Port’s disconnected or connected at 10/100 Mbps.

100M Green Valid port connection at 100 Mbps.

Blinking Data is being transmitted/received.

Off Port’s disconnected or connected at 10/1000 Mbps.

10M Green Valid port connection at 10 Mbps.

Blinking Data is being transmitted/received.

Off Port’s disconnected or connected at 100/1000 Mbps.

Ports

The auto-negotiation feature of the Fast Ethernet Ofce Switch allows

ports to operate in the following modes. NOTE: With the Gigabit ports,

when both the ber and copper interfaces are connected, the system

adopts the ber interface and disables the corresponding copper port

automatically.

Power

To turn the switch on, connect the female end of the included power cord

to the receptacle on the rear panel and then plug the cord into an AC

outlet. Check that the Power LED is lit on the front panel.

installatiOn

The Fast Ethernet Ofce Switch can be placed on a desktop (or other

appropriate at surface) or mounted in a rack. Prior to installation,

check that:

• the device will have adequate ventilation. A minimum clearance of 25 mm

(1 inch) on all sides is recommended.

• the location is fairly cool and dry. (See Specications for the acceptable

temperature and humidity operating ranges.)

• the location is free from electrical noise from radios, transmitters,

broadband ampliers and such.

INSTALLATION

Port Media Speed Duplex Mode

10/100 Mbps 10/100 Mbps RJ-45 (copper) 10 Mbps Full

Half

100 Mbps Full

Half

10/100/1000 Mbps 10/100/1000 Mbps (copper) 10 Mbps Full

Half

100 Mbps Full

Half

1000 Mbps Full

1000 Mbps (ber — mini-GBIC 1000 Mbps Full

required)

Desktop Placement

• Afx the provided rubber pads to the bottom of the switch to protect it

from scratches and prevent slipping.

• Make sure the surface can support the weight of the switch.

• Position the switch for easy and secure access to AC power.

Rackmounting

• Disconnect any cords and cables attached to the switch.

• Place the device right-side up on a at, sturdy surface with the front

panel facing you.

• Position one of the included mounting brackets over the corresponding

holes on either side of the device.

• Insert and fully tighten the included screws.

• Attach the second bracket in the same manner.

• Place the switch in the rack and secure with suitable screws (not

included).

• Reconnect the cords and cables as needed.

Cables

All ports on the Fast Ethernet Ofce Switch support Auto-MDI/MDI-X:

Either straight-through or crossover cables can be used to connect the

switch with PCs, other switches, hubs, routers and other devices.

Use Category 3,4,5 or 5e UTP/STP cable to ensure valid connections

and to obtain/maintain optimal performance. Appropriate cables

corresponding to different transmitting/receiving speeds are required,

as indicated in the following table.

INSTALLATION

Media Speed Wiring

10/100 Mbps copper 10 Mbps Cat3/4/5 UTP/STP

100 Mbps Cat5 UTP/STP

10/100/1000 Mbps copper 10 Mbps Cat3/4/5 UTP/STP

100 Mbps Cat5 UTP/STP

1000 Mbps Cat5/5e UTP/STP

1000 Mbps ber (mini-GBIC 1000 Mbps Cable type varies depending on

required the mini-GBIC selected.

spEciFicatiOns

SPECIFICATIONS

Standards

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Twisted Pair

Gigabit Ethernet)

• IEEE 802.3u (100Base-TX Fast

Ethernet)

• IEEE 802.3x (ow control, for full

duplex mode)

• IEEE 802.3z (1000Base-SX/LX/

LHX)

General

• Media support:

- 10Base-T Cat3, 4, 5 UTP/STP

RJ-45

- 100Base-TX Cat5 UTP/STP

RJ-45

- 1000Base-T Cat5e UTP/STP

RJ-45

- Fiber: dependent on mini-GBIC

types

• Packet lter/forwarding rate:

- 1,488,000 pps (1000 Mbps)

- 148,800 pps (100 Mbps)

- 14,880 pps (10 Mbps)

• Buffer memory: 320 kBytes

• MAC address table: 8192 entries

• Backplane speed: 8.8 Gbps

• Switch architecture: store and

forward

• Ports

- 24 x RJ-45 Fast Ethernet ports

- 2 RJ-45 Gigabit ports

- 2 SFP mini-GBIC transceiver

module slots

• Certications: FCC Class A, CE

Mark, VCCI Class A

LEDs

• Power

• Link Speed per port: 10/100/1000

Mbps

• Link/Activity per port

Power

• Internal power supply, 100 – 240 V

AC, 50/60 Hz

• Power consumption: 13.65 Watts

(maximum)

Environmental

• Metal housing, 19” rackmount, 1 U

• Dimensions: 440 (W) x 130 (L) x

44 (H) mm (17.4 x 5.1 x 1.7 in.)

• Weight: 2.3 kg (5.1 lbs.)

• Operating temperature: 0 – 40°C

(32 – 104°F)

• Operating humidity: 10 – 90% RH,

non-condensing

• Storage temperature: -20 – 70°C

(-4 – 158°F)

Package Contents

• Fast Ethernet Ofce Switch

• Power cable

• 19” rackmount brackets

• User manual / quick install guide

INTELLINET NETWORK SOLUTIONS™offers a complete line

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.intellinet-network.com.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

Autres manuels pour 523929

Table des matières

Autres manuels Intellinet Changer

Intellinet

Intellinet 561143 Manuel utilisateur

Intellinet

Intellinet 524513 Manuel utilisateur

Intellinet

Intellinet 560764 V1 Series Manuel utilisateur

Intellinet

Intellinet 560542 Manuel utilisateur

Intellinet

Intellinet 561792 Manuel utilisateur

Intellinet

Intellinet 523929 Manuel utilisateur

Intellinet

Intellinet 552004 Manuel utilisateur

Intellinet

Intellinet 561433 Manuel utilisateur

Intellinet

Intellinet 506540 Manuel utilisateur

Intellinet

Intellinet 524513 Manuel utilisateur

Intellinet

Intellinet 503631 Manuel utilisateur

Intellinet

Intellinet 560801 Manuel utilisateur

Intellinet

Intellinet 503501 Manuel utilisateur

Intellinet

Intellinet 508261 Manuel utilisateur

Intellinet

Intellinet IPS-6GM02-60W Manuel utilisateur

Intellinet

Intellinet 523929 Manuel utilisateur

Intellinet

Intellinet IPS-05-2.5G-55W Manuel utilisateur

Intellinet

Intellinet 502931 Manuel utilisateur

Intellinet

Intellinet 524513 Manuel utilisateur

Intellinet

Intellinet 523868 Manuel utilisateur

Intellinet

Intellinet 505710 Series Manuel utilisateur

Intellinet

Intellinet 561907 Manuel utilisateur

Intellinet

Intellinet 560900 Manuel utilisateur

Intellinet

Intellinet 561969 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur