Intel DH61AGL Manuel utilisateur

Autres manuels pour DH61AGL

1

Ce manuel convient aux modèles suivants

13

Table des matières

Autres manuels Intel Carte mère

Intel

Intel BLKD425KT Guide de configuration

Intel

Intel BLKDH67CL Guide de configuration

Intel

Intel D102GGC2 Manuel utilisateur

Intel

Intel D2500CC Manuel utilisateur

Intel

Intel DQ67SW Manuel utilisateur

Intel

Intel BOXD845GVFNL Manuel utilisateur

Intel

Intel iSBC 86/14 Guide rapide de l'utilisateur

Intel

Intel SBT2 Manuel utilisateur

Intel

Intel BOXDG41BI Guide de configuration

Intel

Intel BLKDH57DD Guide de configuration

Intel

Intel DZ87KLT-75K Manuel utilisateur

Intel

Intel BOXD865GVHZ Guide de configuration

Intel

Intel DH87MC Manuel utilisateur

Intel

Intel D945GCCR Manuel utilisateur

Intel

Intel D945GCPE - Desktop Board Motherboard Manuel utilisateur

Intel

Intel Desktop Board D845GVFN Manuel utilisateur

Intel

Intel D945PLNM Manuel utilisateur

Intel

Intel i875P Manuel utilisateur

Intel

Intel D845PEBT2 Manuel utilisateur

Intel

Intel VIA K8T800 Manuel utilisateur

Intel

Intel D53427RKE Manuel utilisateur

Intel

Intel D845GERG2 - OCTOBRE 2002 Manuel utilisateur

Intel

Intel D945GCZ - Desktop Board Motherboard Manuel technique

Intel

Intel DG965PZ Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Intel®Smart Response Technology User Guide

Note: This feature requires that the SATA controller be set to RAID mode via the

system BIOS.

Intel®Smart Response Technology is an Intel®Rapid Storage Technology (Intel®RST) caching

feature that improves computer system performance. It allows a user to configure computer

systems with a Solid State Drive (SSD) used as cache memory between the hard disk drive and

system memory. This provides the advantage of having a hard disk drive (or a RAID volume) for

maximum storage capacity while delivering an SSD-like overall system performance experience.

Intel®Smart Response Technology caching is implemented as a single drive letter solution; no

additional drive letter is required for the SSD device used as cache.

System Requirements:

For a system to support Intel Smart Response Technology it must have the following:

•Intel®Z68/Z77/H77/Q77 Express Chipset-based desktop board

•Intel®Core™ Processor in the LGA1155 package

•System BIOS with SATA mode set to RAID

•Intel Rapid Storage Technology software 10.5 version release or later

•Single Hard Disk Drive (HDD) or multiple HDD’s in a single RAID volume

•Solid State Drive (SSD) with a minimum capacity of 18.6GB

•Operating system: Microsoft Windows Vista* (32-bit and 64-bit editions), Microsoft

Windows* 7 (32-bit and 64-bit editions)

Setup Guide

Configure SATA Mode in BIOS Setup

1. Press the F2 key during boot up to enter the BIOS setup menu

2. Go to Configuration > SATA Drives

3. Select the setting for Chipset SATA Mode and change the value to RAID

4. Press the F10 key to save settings and restart the system

Operating System Installation

5. You may now begin installation of the operating system on the HDD (or RAID volume)

6. Install all required device drivers

7. Install the Intel Rapid Storage Technology software version 10.5 or later

Enabling Intel Smart Response Technology

Note: The Intel RST software denotes Intel Smart Response Technology as Accelerate

8. Run the Intel RST software through the All Programs menu or the task bar icon.

9. Click “Enable acceleration” either under “Status” or “Accelerate”.

10. Select the SSD to be used as a cache device.

11. Select the size from the SSD to be allocated for the cache memory.

Note: Any remaining space on the SSD may be used for data storage using the simple

data single-disk RAID 0 volume that is automatically created.

12. Select the HDD (or RAID volume) to be accelerated. It is highly recommended to

accelerate the system volume or system disk for maximum performance.

13. Select the acceleration mode, and then click “OK”. By default, Enhanced mode is

selected.

Note: Enhanced mode (default): Acceleration optimized for data protection.

Maximized mode: Acceleration optimized for input/output performance.

14. The page refreshes and reports the new acceleration configuration in the Acceleration

View.

15. Congratulations! Your system is now successfully configured with the Intel Smart

Response Technology!

* Other names, brands, and logos may be claimed as the property of others.

Intel, the Intel logo, Intel Core, and Core Inside are trademarks of Intel Corporation in the U.S. and/or other countries.

Copyright © 2011, 2012 Intel Corporation. All rights reserved.