Inepro PayMatic P2000 Manuel utilisateur

Installation Manual | PayMatic P2000

PayMatic P2000

Congratulations on your selection of the Inepro PayMatic P2000. We are certain you

will be pleased with your purchase of one of the flexibele solutions of the market.

We want to help you get the best result from your PayMatic P2000. This manual

contains information on how to do that; please read it carefully. Due to continuous

product improvements this manual is subject to changes without notice.

We strongly recommend you read the license agreement to fully understand its

coverage and your responsibilities of ownership.

Your Inepro dealer is dedicated to your satisfaction and will be pleased to answer your

questions and your concerns.

Best wishes,

Inepro BV.

The most versatile payment solution

graphic, electronic, or mechanical, including photocopying, recording, taping, or information

storage and retrieval systems - without the written permission of the publisher.

Products that are referred to in this document may be either trademarks and/or registered

trademarks of the respective owners. The publisher and the author make no claim to these

trademarks.

While every precaution has been taken in the preparation of this document, the publisher and

the author assume no responsibility for errors or omissions, or for damages resulting from the

use of information contained in this document or from the use of programs and source code

that may accompany it. In no event shall the publisher and the author be liable for any loss of

profit or any other commercial damage caused or alleged to have been caused directly or

indirectly by this document.

Created: August 2019 in Nieuw-Vennep.

Publisher

Managing Editor

Technical Editors

Cover Design

Inepro B.V.

K. de Graaf

P. Grimmerink

K. de Graaf

Production

Inepro B.V.

Team Coordinator

R. Groen

H. Wagenaar

J. van den Berg

PayMatic P2000

P. Blom

Table of Contents

Introduction 1

Open / disassemble the PayMatic 3

Installation 6

Notes 8

ATTENTION!!

Read this manual carefully before installing the Pay Matic P2000!

Mains connection

Guar entee

Security

Before connecting the appliance to the mains, check that the mains supply v oltage corresponds

to the v oltage printed on the ty pe plate of the adapter. If the mains v oltage is different, consult

y our supplier.

No guarantee can be giv en if safety regulations are not follow ed.

A lw ay s disconnect the pow er supply before handling any thing inside the dev ice.

This dev ice is in conformity w ith the EM C directiv e and low -v oltage directiv e.

CE Confor mité Eur opeène (C onform European Nor m)

WEEE Dir ective ( Waste of Electr ical and Electronic Equipment)

Inepro considers it important to properly take the climate into account. We therefore produce as

many climate-friendly products. Your new dev ice contains materials w hich can be recy cled and

then reused. A t the end of life, specialized companies can dismantle the dev ice, to materials w hich

can be reused in order to recy cle and reuse. F or example, the materials that must be discarded w ill

be limited to a minimum. P lease take into account the rules and regulations in y our area regarding

the rules about disposal of packaging materials, exhausted bateries and old equipment.

Thank y ou, Inepro BV

This dev ice may only be used indoors.

Indoor User O nly

Directives

Due to continuous product improv ements this manual is subject to change without notice. This

document describes the technical and functional operation of the Pay Matic P2000. Greatest care

has been taken drafting the information in this manual and it may be said that it is reliable.

How ev er, the producer is not liable for any shortcomings in the text or incompleteness of the

information. Thank y ou for y our decision to use the Pay M atic P2000.

T his document:

Introduction

Part

Introduction

The PayMatic P2000 is the simplest unit of the series coin machines and

is meant to be connected to any device with a timer system which goes

out automatically if necessary. Upon introduction of a coin, this PayMatic

emits only a normally open or a normally closed signal to activate the

device connected to the coin machine.

The PayMatic housing is made of crash- and scratch-resistant plastic.

The mechanical slot meter accepts only one type of coin (token). This

PayMatic is not equipped with a return key, return box and it has no

display either due to the lack of any electronic components.

Open / disassemble the PayMatic

Part

Open / disassemble the PayMatic

1. Lay the Pay Matic, if possible,

on its back.

2. Open the bottom lid. If the coin box is

mounted on a pillar:

. Open and remov e the padlock

at the back of the pillar.

. Take out the cash box, remov e

the locking bolts f ixed on the

upper side of the pillar.

3. Take out the two security pins.

Open the f ront plate under a 15 degree angle.

4. Slide the f ront plate down under that angle.

5 - PayMatic P2000

5. Slide the top to the back.

6. Lif t the top of the case.

For more information use the QR code or URL to watch the YouTube

instruction movie.

http://www.youtube.com/watch?v=fnpTfANu6c4

7) The housing can be installed by means of the 4 units M5 x 16

mm. screws, included in this delivery, when using a fastening

bow, or by means of 4 screws (M4 x 40mm) when fixing the

housing to the wall.

For construction follow steps 1-6 in reverse. Do not forget

to replace the included locking bolts (Stap 3)!!

Autres manuels Inepro Terminal de paiement

Inepro

Inepro PayCon Touch - First Time Log On Manuel utilisateur

Inepro

Inepro PayMatic - D2000 - Internet Timer Manuel utilisateur

Inepro

Inepro Back Office Suite Manuel utilisateur

Inepro

Inepro PayCon Touch - Pillar Manuel utilisateur

Inepro

Inepro PayMatic AD 2400 Manuel utilisateur

Inepro

Inepro Sales Master Manuel utilisateur

Inepro

Inepro Card Master CM500 Manuel utilisateur

Inepro

Inepro PM - Copy 1600T for iR1600 Manuel utilisateur

Inepro

Inepro PM - Copy Coin CM7000 - Xerox Config Manuel utilisateur

Inepro

Inepro PayMatic 4B - Xerox MFP Manuel

Manuels Terminal de paiement populaires d'autres marques

PAX

PAX D180SRF Manuel utilisateur

LinkPoint

LinkPoint AIO Manuel utilisateur

Moneris

Moneris hispeed 6200 Manuel utilisateur

Moneris

Moneris iWL220 Manuel utilisateur

Ingenico

Ingenico iUC280 Manuel utilisateur

Ingenico

Ingenico Tetra Move/5000 Manuel utilisateur

Ingenico

Ingenico iWL250B Manuel utilisateur

Optimum

Optimum M4230 Manuel utilisateur

Triton

Triton RL5000 Manuel utilisateur

Ingenico group

Ingenico group Lane/8000 Manuel utilisateur

Gilbarco

Gilbarco FlexPay IV CRIND Manuel d'installation et d'exploitation

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manuel utilisateur

PAX

PAX S920 Manuel utilisateur

Ingenico

Ingenico iCT220, iCT250 Manuel utilisateur

dejavoo

dejavoo Z Series Manuel utilisateur

VeriFone

VeriFone VX 520 Series Manuel utilisateur

Optomany

Optomany axept S900 Manuel utilisateur

Skyzer

Skyzer iWL252 BLUETOOTH Manuel utilisateur