Impex MD-860 Manuel utilisateur

MARCY DIAMOND

ELITE

WEIGHT BENCH

MD-860

IMPEX®INC.

14777 Don Julian Rd., City of Industry, CA 91746

Tel: (800) 999-8899 Fax (626) 961-9966

www.impex-fitness.com

[email protected]

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Pack

Assembly Instruction

Exploded Diagram

Parts List

Warranty

Ordering Parts

Model

MD-860

Retain This

Manual for

Reference

07/10/09

OWNER'S

MANUAL

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICE....................................................................... 2

HARDWARE PACK………............................................................................... 4

ASSEMBLY INSTRUCTIONS........................................................................... 6

EXPLODED DIAGRAM.................................................................................... 11

PARTS LIST..................................................................................................... 12

WARRANTY..................................................................................................... 13

ORDERING PARTS.......................................................................................... 13

BEFORE YOU BEGIN

Thank you for selecting the MARCY DIAMOND WEIGHT BENCH MD-860 by

IMPEX®INC. For your safety and benefit, read this manual carefully before

using the machine. As a manufacturer, we are committed to provide you

complete customer satisfaction. If you have any questions, or find there are

missing or damaged parts, we guarantee your complete satisfaction

through direct assistance from our factory. To avoid unnecessary delays,

please call our TOLL-FREE customer service number. Our Customer

Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT leave children

unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms,

STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or

outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other

clothing that could become caught in the machine. Running or aerobic shoes are also

required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO NOT use

attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or physician in

attendance.

10. Before using the machine to exercise, always do stretching exercises to properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

13. Maximum user’s weight: 300 lbs.

14. Maximum weight on uprights: 600 lbs.

15. Maximum weight on leg developer: 100 lbs.

CARE AND MAINTENANCE

1. Inspect and tighten all parts before using the machine.

2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT

YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS

OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH

PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS

EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL

INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF

THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

WARNING LABEL PLACEMENT

The Warning Labels shown here have been placed on the Cross Brace and Rear Stabilizer.

If the labels are missing or illegible, please call customer service at 1-800-999-8899 for

replacement. Apply the labels in location shown

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

ASSEMBLY INSTRUCTION

Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended for two or more people to assemble this

machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Do not tighten Nuts and Bolts until instructed to do so.

B.) Attach an Upright Beam (#1) onto a Rear Base Frame (#2). Secure them together with

two M10 x 3 ¾” Carriage Bolts (#35), one 5 ½” Curved Bracket (#13), two Ø ¾” Washer

(#43), and two M10 Aircraft Nuts (#46) from bottom. Repeat the same step to install the

other Upright Beam onto the other Rear Base Frame.

C.)Connect the two Upright Beams with a Cross Brace (#3) in the mid-span. Secure each

end to an Upright Beam with two M10 x 3 ¾” Allen Bolts (#37), two Ø ¾” Washer (#43),

and one 3 ½” Curved Bracket (#14).

D.)Securely tighten all Nuts and Bolts.

E.) Insert two Crutches (#4) into the two Upright Beams. Insert two M18 Lock Knobs (#22)

through the selected holes to obtain desired height. DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Do not tighten Nuts and Bolts until instructed to do so.

B.) Attach the Main Seat Support (#6) to the Rear Stabilizer (#8). Secure it with two M10 x 3 ¾”

Carriage Bolts (#35), one 5 ½” Curved Bracket (#13), two Ø ¾” Washers (#43), and two

M10 Aircraft Nuts (#46).

C.) Attach the Main Seat Support to the Front Post (#5). Secure it with one 3 ½” Curved Bracket

(#14), one M10 x 3 ¾” Carriage Bolts (#35), one Ø ¾” Washers (#43), and one M10 Aircraft

Nut (#46) through the lower hole, one M10 x 3 ¾” Allen Bolt (#37), one Ø ¾” Washer (#43)

through the upper hole.

D.) Securely tighten all nuts and bolts. DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach two Incline Support Frames (#15) to the Main Seat Support (#6) from both sides.

Alignthe holes. Securethe Incline Support Frames to the Main Seat Support with three M10

x 3 ½” Allen Bolts (#38), six Ø ¾” Washers (#43), and three M10 Aircraft Nuts (#46).

B.) Attach the Incline Support (#11) to the side-holes on the two Backrest Supports (#9). Align

the holes. Secure it with one M10 x 6 1/8” Allen Bolt (#36), two Ø ¾” Washers (#43), and

one M10 Aircraft Nut (#46). Place the other end of Incline Support to the selected slot on

Incline Support Frame to hold the desired Backrest Incline.

C.) Attach the holes on the end of the Backrest Supports to the pivot on the Main Seat Support.

Align the holes. Secure the two Backrest Supports to the pivot with one M12 x 6 1/8” Hex

Bolt (#34), two Ø 1” Washers (#42), and one M12 Aircraft Nut (#45).

D.) Do not over tighten the Nuts and Bolts. Make sure the Backrest Supports and Incline

Support are able to swivel. DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the Backrest Board (#20) to the Backrest Supports (#9). Secure it with four M8 x 1

5/8” Allen Bolts (#40) and four Ø 5/8” Washers (#44).

B.) Place the Seat Pad (#19) onto the seat bracket on Main Seat Support (#6). Secure it with

four M8 x 1 5/8” Allen Bolts (#40) and four Ø 5/8” Washers (#44). DIAGRAM 4

Table des matières

Autres manuels Impex Salle de sport à domicile

Impex

Impex MARCY MWM-1509 Manuel utilisateur

Impex

Impex Marcy SM-8117 Manuel utilisateur

Impex

Impex APEX II Manuel utilisateur

Impex

Impex Apex TC-3500 Manuel utilisateur

Impex

Impex MARCY MWM-8900 Manuel utilisateur

Impex

Impex MD-867W Manuel utilisateur

Impex

Impex COMPETITOR CB-349 Manuel utilisateur

Impex

Impex MARCY MWM-1558 Manuel utilisateur

Impex

Impex MWB 715B Manuel utilisateur

Impex

Impex MARCY MWM-1100 Manuel utilisateur

Impex

Impex MWB-36780B Manuel utilisateur

Impex

Impex PHC-PWR9 Manuel utilisateur

Impex

Impex Gym Dandy TT-320 Manuel utilisateur

Impex

Impex IRON GRIP STRENGTH TSA-9900 Manuel utilisateur

Impex

Impex MARCY SM-4033 Manuel utilisateur

Impex

Impex Marcy SB-350 Manuel utilisateur

Impex

Impex Marcy MWM-7119 Manuel utilisateur

Impex

Impex MARCY MWB-544 Manuel utilisateur

Impex

Impex MD-739 Manuel utilisateur

Impex

Impex Iron Grip Strength IGS-663 Manuel utilisateur

Impex

Impex Marcy SB-662 Manuel utilisateur

Impex

Impex PowerhouseWM 1400 Manuel d'utilisation et d'entretien

Impex

Impex IRON GRIP STRENGTH TSA-410 Manuel utilisateur

Impex

Impex MD-4100 Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Weider

Weider 8300 Hard Drive Manuel utilisateur

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Weider

Weider 8700 I Guide de démarrage rapide

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Weider

Weider WEMC10161 Manuel utilisateur

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur