Impex CB-204 Manuel utilisateur
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Pack
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
CB 204
Retain This
Manual for
Reference
07-31-07
OWNER'S
MANUAL
COMPETITOR BENCH
CB-204
IMPEX®INC.
2801 S. Towne Ave, Pomona, CA 91766
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
TABLE OF CONTENTS
BEFORE YOU BEGIN...................................................................................... 1
IMPORTANT SAFETY NOTICE....................................................................... 2
HARDWARE PACK ……….....…....................................................................... 4
ASSEMBLY INSTRUCTIONS........................................................................... 5
EXPLODED DIAGRAM.........................................................................………. 9
PARTS LIST…………………………………………………………………………. 10
WARRANTY.................................................................................................… 11
ORDERING PARTS......................................................................................... 11
BEFORE YOU BEGIN
Thank you for selecting the Competitor Bench CB204 by IMPEX®INC. For
your safety and benefit, read this manual carefully before using the machine.
As a manufacturer, we are committed to provide you complete customer
satisfaction. If you have any questions, or find there are missing or damaged
parts, we guarantee you complete satisfaction through direct assistance from
our factory. To avoid unnecessary delays, please call our TOLL-FREE
customer service number. Our Customer Service Agents will provide
immediate assistance to you.
Toll-Free Customer Service Number
1-800-999-8899
Mon. - Fri. 9 a.m. - 5 p.m. PST
www.impex-fitness.com
1
IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your machine. In particular, note the following safety
precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. A spotter is recommended during exercise.
CARE AND MAINTENANCE
1. Inspect and tighten all parts before using the machine.
2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
3. Maximum weight capacity on the uprights: 200 lbs.
4. Maximum user’s weight: 250 lbs.
5. Maximum weight capacity on the leg developer: 100 lbs.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ
ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
WRANING LABEL REPLACEMENT
The warning label shown here have been placed on the Cross Brace. If the label is missing or illegible,
please call customer service at 1-800-888-8899 for replacements. Apply the label in the location shown.
3
Hardware Pack
NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size.
4
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the mid-span.
B.) Secure each end of Cross Brace to each Upright Beam with two M8 x 2 ½” Hex Bolts
(#20), one Bracket (#10), two Ø 5/8” Washers (#26), and two M8 Aircraft Nuts (#24).
C.) Insert the Backrest Adjustment Bar (#11) through the selected holes on the Upright
Beams to obtain desired incline position. DIAGRAM 1
5
STEP 2 (See Diagram 2)
A.) Attach the Front Support (#5) to Main Seat Support (#3). Secure it with one M8 x 1 5/8”
Carriage Bolt (#28), Ø 5/8” Washer (#26), and M8 Aircraft Nut (#24). Do not tighten the
Nut and Bolt yet.
B.) Attach the other end of Main Seat Support to the Cross Brace (#2). Secure it with four
M8 x 2 3/8” Hex Bolts (#18), one Bracket (#10), four Ø 5/8” Washers (#26), and four M8
Aircraft Nuts (#24).
C.)Attach the Diagonal Support (#4) to the Main Seat Support. Secure it with one M8 x 1
¾” Carriage Bolt (#29), Ø 5/8” Washer (#26), and M8 Aircraft Nut (#24).
D.)Attach the other end of Diagonal Support to the Front Support. Secure it with one M8 x
2 1/8” Hex Bolt (#30), Ø 5/8” Washer (#26), and M8 Aircraft Nut (#24).
E.) Securely tighten all Nuts and Bolts. DIAGRAM 2
6
STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#6) to the open bracket on the Front Support (#5). Secure it
with one M10 x 2 3/8” Hex Bolt (#21), Ø ¾” Washer (#31), and M10 Aircraft Nut (#27).
B.) Insert two Foam Tubes (#13) half way through the holes on the Leg Developer.
C.)Push four Foam Rolls (#12) onto the Foam Tubes.
DIAGRAM 3
7
STEP 4 (See Diagram 4)
A.) Attach the side-holes on the two Backrest Supports (#7) to the pivot on the Main
Seat Support (#3). Place the other end of the Backrest Supports rest against the
Backrest Adjustment Bar (#11).
B.) Attach the Backrest Board (#8) to the Backrest Supports. Secure it with four M6 x 1
5/8” Hex Bolts (#23) and Ø ½” Washers (#25).
C.)Place the Seat Pad (#9) onto the Main Seat Support. Secure it with four M6 x 5/8”
Hex Bolts (#22) and Ø ½” Washers (#25).
DIAGRAM 4
8
9
Table des matières
Autres manuels Impex Salle de sport à domicile
Impex
Impex MARCY PLATINUM MP-3500 Manuel utilisateur
Impex
Impex POWERHOUSE SB 660 Manuel utilisateur
Impex
Impex MARCY MWM-7041 Manuel utilisateur
Impex
Impex Powerhouse Club PHC 715 Manuel utilisateur
Impex
Impex Marcy Diamond MD-859 Manuel utilisateur
Impex
Impex MARCY SB-222 Manuel utilisateur
Impex
Impex Circuit Fitness AMZ-986RW Manuel utilisateur
Impex
Impex 120727 Manuel utilisateur
Impex
Impex MARCY MWM-983 Manuel utilisateur
Impex
Impex Marcy SB-685 Manuel utilisateur
Impex
Impex Marcy Diamond Elite MD-MXM6 Manuel utilisateur
Impex
Impex MARCY MWM-1001 Manuel utilisateur
Impex
Impex CB-339 Manuel utilisateur
Impex
Impex MARCY AB4000 Manuel utilisateur
Impex
Impex MARCY WM-367 Manuel utilisateur
Impex
Impex WM-1508 Manuel utilisateur
Impex
Impex NS-40503RW Instructions d'installation et d'utilisation
Impex
Impex NS-1000 Manuel utilisateur
Impex
Impex MWB-20101 Manuel utilisateur
Impex
Impex COMPETITOR CB-349 Manuel utilisateur
Manuels Salle de sport à domicile populaires d'autres marques
Horizon Fitness
Horizon Fitness OXFORD 6 Manuel utilisateur
Energetics
Energetics Multi Trainer 5.1 Manuel utilisateur
Matrix
Matrix MG-PL Series Manuel utilisateur
Reebok
Reebok Tbr2i Manuel d'utilisation et d'entretien
Weider
Weider 8300 Hard Drive Manuel utilisateur
Pure Fitness
Pure Fitness 8526HE Manuel utilisateur
