Impex Marcy Classic MCB-5693 Manuel utilisateur

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

MCB-5693

Retain This

Manual for

Reference

07-23-08

OWNER'S

MANUAL

MARCY CLASSIC

WEIGHT BENCH

MCB-5693

IMPEX®INC.

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................……….. 1

IMPORTANT SAFETY NOTICE...................................................................……….. 2

HARDWARE PACK……….....….....................................................................……….. 4

ASSEMBLY INSTRUCTIONS.........................................................................……….. 6

EXPLODED DIAGRAM…………………………………………………………………….. 10

PARTS LIST………….………….......................................................................………. 11

WARRANTY.................................................................................................…………. 12

ORDERING PARTS.......................................................................................………… 12

BEFORE YOU BEGIN

Thank you for selecting the MARCY CLASSIC WEIGHT BENCH MCB-

5693 by IMPEX INC. For your safety and benefit, read this manual

carefully before using the machine. As a manufacturer, we are committed

to provide you complete customer satisfaction. If you have any questions,

or find there are missing or damaged parts, we guarantee you complete

satisfaction through direct assistance from our factory. To avoid

unnecessary delays, please call our TOLL-FREE customer service

number. Our Customer Service Agents will provide immediate assistance

to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. – Fri. 9 a.m. – 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

13. Maximum user’s weight: 300 lbs.

14. Maximum weight on uprights: 600 lbs.

15. Maximum weight on leg developer: 100 lbs.

CARE AND MAINTENANCE

1. Inspect and tighten all parts before using the machine.

2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE

AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ

ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY

DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

WARNING LABEL REPLACEMENT

The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible,

please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

HARDWARE PACK

NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size.

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches.

NOTE: It is strongly recommended that two or more people assemble this machine to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Plug four 2 ¾” x 2” End Cap (#21) onto the Left and Right Upright Beams (#1) & (#2).

B.) Connect the Left and Right Upright Beams with a Cross Brace (#3) in the mid-span. Secure

each end of the Cross Brace with two M10 x 2 ¾” Carriage Bolts (#42), one 4 ¾” x 2 ¾”

Bracket (#17), two Ø ¾” Washers (#39), and two M10 Aircraft Nuts (#50).

C.)Place the Backrest Adjustment Bar (#8) onto the selected slot on the Upright Beams to obtain

desired backrest incline.

D.)Insert the two Crutches (#7) into the two Upright Beams. Use the Lock Knob (#26) to lock the

Crutch in desired position. DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach the Main Seat Support (#4) to the Leg Developer Holder (#5). Secure it with two

M10 x 2 ½” Carriage Bolts (#41), two Ø ¾” Washers (#39), and two M10 Aircraft Nuts

(#50). Do not tighten the Nuts and Bolts yet.

B.) Attach the Main Seat Support to the Cross Brace (#3). Secure it with two M10 x 2 ½”

Carriage Bolts (#41), two Ø ¾” Washers (#39), and two M10 Aircraft Nuts (#50).

C.)Securely tighten all Nuts and Bolts. DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the side-holes on the end of the Backrest Supports (#11) to the pivot on the Main

Seat Support (#4). Secure them together with one M12 x 7 ¼” Hex Bolt (#43), two ∅1”

Washers (#40) and one M12 Aircraft Nut (#51).

B.) Attach the Backrest Board (#13) to the Backrest Supports. Secure it with four M8 x 1 ½”

Allen Bolts (#47) and Ø 5/8” Washers (#38). Place the other end of Backrest Board rest

against the Backrest Adjustment Bar.

C.) Attach the two Seat Brackets (#6) onto the Main Seat Support. Secure each Seat Bracket

with one M10 x 2 ½” Allen Bolts (#44), two Ø ¾” Washers (#39), and one M10 Aircraft

Nut (#50).

D.) Place the Seat Pad (#14) onto the Seat Brackets. Secure it with four M8 x 1 ½” Allen

Bolts (#47) and Ø 5/8” Washers (#38). DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the Leg Developer (#9) to the Leg Developer Holder (#5). Secure it with one Axle

(#54), two M10 x 5/8” Allen Bolts (#45), and two ∅¾” Washers (#39).

B.) Insert two Foam Tubes (#12) halfway through the holes on the Leg Developer. Push four

Foam Rolls (#19) onto the Tubes from both ends. Plug four Foam Roll End Caps (#29)

into the ends.

C.)Slide an Olympic Sleeve (#28) onto the weight post on the Leg Developer. Attach a Spring

Clip (#20) to the Sleeve.

D.)Attach the Arm Curl Handle (#36) to the back holes on the Leg Developer. Secure it with

one Lock Pin (#30). Attach the Abdominal Strap (#33) to the front holes on the Leg

Developer. Secure it with another Lock Pin.

E.) Attach the Arm Curl Pad (#15) to the Arm Curl Bracket (#37). Secure it with two M8 x 5/8”

Allen Bolts (#46) and two Ø 5/8” Washers (#38). Attach the Arm Curl Bracket to the bracket

on Arm Curl Stand (#10). Insert the M8 x 3 ½” Allen Bolt (#48) through the open track on

the Arm Curl Stand and the hole on Arm Curl Bracket then secure with two Ø 5/8” Washers

(#38) and one M8 Aircraft Nut (#49). Do not over tighten the Nut and Bolt. Make sure

the Bolt slides on the track freely.

F.) Insert the Arm Curl Stand into the Leg Developer Holder. Use the Lock Knob (#22) to lock

the Arm Curl Stand in position.

G.)Pull and flip up the Arm Curl Pad along the track facing the back when doing Abdominal

exercises using the Abdominal Strap.

H.)Remove Abdominal Strap and Arm Curl Handle when doing Leg Developer exercises.

Table des matières

Autres manuels Impex Salle de sport à domicile

Impex

Impex MARCY MWM-8900 Manuel utilisateur

Impex

Impex GOLD'S GYM WMGG-368 Manuel utilisateur

Impex

Impex MARCY PRO MWM-5115 Manuel utilisateur

Impex

Impex MARCY CLUB MKM-81010 Manuel utilisateur

Impex

Impex Apex TC-3500 Manuel utilisateur

Impex

Impex GD-810 Manuel utilisateur

Impex

Impex MARCY MD-9010 Manuel utilisateur

Impex

Impex MARCY CLUB MKM-81010 Manuel utilisateur

Impex

Impex MARCY MWB CR 4 Manuel utilisateur

Impex

Impex Marcy Classic MCB 880-MG Manuel utilisateur

Impex

Impex MARCY MWB-479 Manuel utilisateur

Impex

Impex Marcy Platinum GS 99 Manuel utilisateur

Impex

Impex MD-4100 Manuel utilisateur

Impex

Impex IRONGRIP IGS-04 Manuel utilisateur

Impex

Impex AMZ-979RW Manuel utilisateur

Impex

Impex Marcy Diamond MD-859 Manuel utilisateur

Impex

Impex MWM 2001 Manuel utilisateur

Impex

Impex IGS-6201 Manuel utilisateur

Impex

Impex MD-879 Manuel utilisateur

Impex

Impex MACH V Manuel utilisateur

Impex

Impex Powerhouse PHC-696 Manuel utilisateur

Impex

Impex ADBE-10240 Manuel utilisateur

Impex

Impex NS-908UP Manuel utilisateur

Impex

Impex CB-202 Manuel utilisateur

Manuels Salle de sport à domicile populaires d'autres marques

Horizon Fitness

Horizon Fitness OXFORD 6 Manuel utilisateur

Energetics

Energetics Multi Trainer 5.1 Manuel utilisateur

Matrix

Matrix MG-PL Series Manuel utilisateur

Reebok

Reebok Tbr2i Manuel d'utilisation et d'entretien

Weider

Weider 8300 Hard Drive Manuel utilisateur

Pure Fitness

Pure Fitness 8526HE Manuel utilisateur

Weider

Weider 8700 I Guide de démarrage rapide

Bowflex

Bowflex Sport 001-6961 Manuel utilisateur

NordicTrack

NordicTrack E8200 Competition Bench Guide de démarrage rapide

Weider

Weider WEMC10161 Manuel utilisateur

Body Solid

Body Solid GHYP-345 Manuel utilisateur

Evo

Evo TAHOE 5105 Manuel utilisateur

cardiobull

cardiobull RA17 Manuel utilisateur

ParaBody

ParaBody 40 Manuel utilisateur

JLL

JLL Ventus Pro Air Power Manuel utilisateur

Trojan

Trojan Colorado 370 Manuel utilisateur

Octane Fitness

Octane Fitness xRide xR650 Manuel utilisateur

Precor

Precor Discovery Series Manuel utilisateur