Ikelite Digital Housing Manuel utilisateur
Lens
Port
Thank you for your purchase of Ikelite equipment. Please read this
instruction manual completely before attempting to operate or dive
with this product. Please refer to the back page of this manual to
register your Ikelite product.
Digital Housing
instruction manual
6146.12 for Canon owershot G11, G12
Table of Contents
Specifications ..............................................................P. 4
ackage Contents ........................................................P. 4
reparation ..................................................................P. 4
Initial Camera Setup........................................................P. 5
Attach External Tray and Handle to Housing ..................P. 6
Housing Controls - Front View ........................................P. 7
Housing Controls - Back View ........................................P. 8
Opening the Housing ......................................................P. 9
Installing the Camera ......................................................P. 9
Attach Hotshoe to Camera..............................................P. 9, 10
Attach Camera to Mounting Tray ....................................P. 9, 10
Using the Camera’s Built-in Flash ..................................P. 11
Closing the Housing ........................................................P. 11
Usage ............................................................................P. 12
Final Check ....................................................................P. 12
Zoom Control ..................................................................P. 12
Diffuser and Deflector Installation and Use ....................P. 13
Conversion Circuitry ........................................................P. 14
Attaching an Ikelite Strobe Arm to the Housing Handle..P. 14
Attaching a Sync Cord to the Housing ............................P. 15
Turn Camera On..............................................................P. 15
Entering the Water ..........................................................P. 16
Maintenance ................................................................P. 16
Lens Port ........................................................................P. 16
2
3
Table of Contents - continued
Lubricant..........................................................................P. 16
Housing Maintenance......................................................P. 17
Control Maintenance ......................................................P. 18
hoto Tips ..................................................................P. 20
Troubleshooting ........................................................P. 20
Spare arts ..................................................................P. 24
Recommended Accessories ....................................P. 24
EV Manual Controller Use ............................................P. 26
Technical Support ....................................................P. 26
Limited Warranty ........................................................P. 26
Returning roducts for Service ................................P. 27
roduct Registration ..................................................Back Cover
4
- Ikelite Digital Housing
- Silicone Lubricant
- Vinyl Port Cover
ackage Contents
- Diffuser
- Deflector
- Extra Control Tips
This product has been water pressure tested at the factory and is depth
rated to 200 ft. (60m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the housing main o-ring and retest to make sure that it is
watertight. Refer to the Troubleshooting section, page 21.
Please read your Canon camera manual thoroughly to have a full
understanding of each camera function.
If you are new to underwater photography, be sure to read the Photo
Tips section.
reparation
Width ......................7in. (180mm) including controls
Height ....................5 in. (130mm) including controls
Depth ......................5.4 in. (140mm) including controls and lens port
Weight ....................2.8 lb (1300g) above water
Buoyancy ................Slightly negative in saltwater for stability
Specifications
NOTES:
TTL Flash is NOT available when camera is in “M” Manual mode. There
is no TTL flash even with Canon's own flash in the camera "M" mode.
Manual power settings can be selected with the multi-control button on
the back of the camera. The strobe should still be left in TTL to take
advantage of this feature.
Leave the housing hotshoe disconnected when using an EV Manual
Controller. If using an EV controller in “M” Manual mode, set the EV
controller to “non-Pre-flash.” Please read page 26 for additional
information when using an EV Manual Controller.
When multiple exposure (continuous shooting) mode is used, the
external flash will not fire. This is normal and also happens with Canon
external speedlights.
5
Initial Camera Setup (before placing camera in housing)
- Insert a fully charged battery. Due to the power required to operate the
camera and LCD screen, start each dive with a fully charged camera
battery.
- Insert and format a memory card.
- Set camera date and time.
- Set ISO to “80.”
- Set camera mode dial to “Av” Aperture priority. In Aperture Priority mode
"Av" the shutter speed should automatically go to 1/60 second.
- Set Flash to “On” (lightning bolt in LCD).
- For General photography, set aperture to f3.5.
- For Macro photography, set aperture to f8.0.
- Set White Balance (AWB) to “Auto.”
- Set Image Size to “L” and compression to “S” Superfine.
- Set Metering to “Center-Weighted Average.”
- In the camera menu set the “ND” Filter to “Cancel.”
6
Attach External Tray and Handle to Housing
Using a 9/16” open end or socket wrench, tighten the External Tray to the
Housing Base using the two 3/8-16 Nuts supplied in the accessory package;
tighten Nuts firmly.
Lens
Port
External Tray & Handle
3/8-16 Nuts
7
Housing Controls - Front View
External Tray Mounts
Lens
Port
Exposure Compensation Dial
Lens ort
Mode Dial
Zoom
Dial
Shutter
Release
Lid Snap
Front
Dial
Shortcut
Housing Front Dial Control
The Housing Front Dial Control rotates the G12 front dial. This control is
NOT applicable to a G11 camera and will sit idle.
Shortcut Control Caution
Turn control downward and inward before closing housing, otherwise,
control can be accidentally wedged between the top of housing and
electronics box resulting in interference with the housing seal.
8
Housing Controls
1. External Strobe Connector & Cap
2. ISO Dial
3. Playback Button
4. AE/FE Lock Button
5. Single Erase Button
6. Metering Light
7. Control Dial
Housing Controls - Back View
8. Manual Focus
9. Macro / Left Button
10. FUNC./SET Button
11. Flash / Right Button
12. Self-Timer / Down Button
13. Display Button
14. Menu Button
6
8
10
9
12
2
4
5
1
3
7
11
13 14
Power Button
9
Opening the Housing
Lid Snaps have a Lock.
To open housing, push Lid Snap
Lock forward and lift as shown.
eep pressure on the Lid Snap so it
does not fly open quickly.
Some Lid Snaps have a lo of
spring ension once hey go over
cen er, so keep a firm grip on he Lid Snap.
Lid Snaps may be opened one a a ime.
Push Forward
Lid Snap Lock
Lift
Installing the Camera
1. Pull out on each housing control until it stops. This will get the controls
out of the way for installation of the camera.
2. Remove the back from the housing.
3. Remove camera lanyard from camera if attached.
4. The mounting tray for the camera is secured to the housing back.
Position the camera on the tray.
5. Slide the housing Hotshoe Connector into the Camera Hotshoe Mount
- page 10, diagram A.
Slide the connector forward until it stops. This
should be done before the camera is secured with the mounting bolt
- page 10, diagram B.
Note: If you are using an EV Controller or slave strobe and NOT hardwiring
your strobes directly to the housing, leave the housing hotshoe
disconnected from the camera. You will also need to install the Flash
Deflector (supplied) into the external port groove to block and deflect the
camera flash to the EV controller - page 13.
6. Using a coin or screwdriver (preferred), secure the camera with the Tray
Mounting Bolt which threads into the camera’s tripod socket - page 10,
diagram B.
10
CAUTION:
Do no cross hread or
over igh en he Tray
Moun ing Bol as you
may damage he
camera ripod socke
hreads.
Diagram B
Attach Camera to Mounting Tray
Attach Hotshoe to Camera
Diagram A
Hotshoe Connector
Mounting
Tray
Housing Back
O-ring
External Strobe Connector
& Waterproof Cap
(Do no remove underwa er)
Canon
G12
Tray Mounting Bolt
Autres manuels pour Digital Housing
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Ikelite Accessoires pour appareils photo
Ikelite
Ikelite AF35 AutoFlash Manuel utilisateur
Ikelite
Ikelite DSC-W90 Manuel utilisateur
Ikelite
Ikelite Canon 6090 Manuel du propriétaire
Ikelite
Ikelite 12 Manuel du propriétaire
Ikelite
Ikelite Canon 6081 Manuel du propriétaire
Ikelite
Ikelite 75301 Manuel utilisateur
Ikelite
Ikelite 6973.03 Manuel utilisateur
Ikelite
Ikelite SLR-DC Housing Manuel utilisateur
Ikelite
Ikelite 6194 Manuel utilisateur
Ikelite
Ikelite DLM200 Manuel utilisateur
Ikelite
Ikelite S95 Manuel du propriétaire
Ikelite
Ikelite F60fd Manuel du propriétaire
Ikelite
Ikelite DS160 Manuel utilisateur
Ikelite
Ikelite Nikon D200 Manuel utilisateur
Ikelite
Ikelite 6243.11 Manuel du propriétaire
Ikelite
Ikelite 6147.16 Manuel utilisateur
Ikelite
Ikelite ST1K Manuel utilisateur
Ikelite
Ikelite iTTL Manuel utilisateur
Ikelite
Ikelite 6116.18 Manuel utilisateur
Ikelite
Ikelite 6871.45 Manuel utilisateur
