iHome iBT77 Manuel utilisateur
Rechargeable
Bluetooth Speaker
with Speakerphone
instruction manual
Model: iBT77
CHARGE
BEFORE
USE
Introduction
Thank you for purchasing the iHome iBT77. This product is designed to
provide high quality wireless sound for your Bluetooth audio device. When
linked to a second iBT77 speaker (sold separately), you can enjoy real
wireless stereo.
This instruction booklet explains the basic operation and care of the unit.
Please read it carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials can damage
the surface of the unit.
iBT77
1
iBT77
What’s Included
• iBT77 speaker
• USB charging cable
• Carry strap
iBT77
2
Carry strap
USB charging cable
iBT77
Front
Microphone
(under grill)
Back
Bluetooth/Speakerphone/
Play/Pause Button
Battery Review Button
(press and hold for voice)
Lower/Raise Volume
Buttons
USB in
Charging Port
Aux-in
Jack
Water resistant
rubber cover
Jack
Carry Strap
Channel
Meet Your iBT77
Bottom
Top
Power Button
Reset Port
Blue Bluetooth
Status Indicator
Light
Green Wireless
Stereo Status
Indicator Light
Red Charging
Status Indicator
Light
3
Getting Started: Carry Strap
The iBT77 has a channel on the upper cabinet
above the controls to attach the included carry
strap. To attach the carry strap, form a small loop
in one end of the carry strap. Insert this loop
through the channel, then pull the loop back
through the larger loop formed in the carry strap
to tighten.
Charging the Unit
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
1. Connect the micro USB plug on the included USB charging cable to the
micro USB in Charging Port on the back of the unit under the rubber
cover.
2. Connect the standard USB plug end of the cable to a power USB port
on a computer, a USB AC adaptor or other USB charging device. For
first time use, charge unit for about 4 hours. The status indicator LED
on top of the unit glows solid red while charging and turns o once unit
is fully charged.
4
iBT77
Charge via computer USB port, USB AC adaptor or other powered USB port
iHome iBT77 USB port
USB AC adaptor
(not included)
USB AC adaptor
connected to working outlet
Reviewing Battery Charge Level
(Charger is Disconnected and unit is ON)
1. Press and hold the Battery Button when unit is ON but not charging
(micro USB cable not connected) to enter Battery Review Mode. The
built-in voice will announce the current battery level.
5
TIP: On some iOS (Apple)
devices, you can view the iBT77
battery status on your device’s
screen. When device is paired
and connected, look for a
vertical battery icon next to the
Bluetooth icon on the upper
right corner of the
device’s screen.
iBT77
Pairing Your Device
Pairing is the set-up process to introduce your Bluetooth-capable device to
the iBT77. Once your device is paired, the iBT77 can recognize it and you can
play your audio through it.
1. Turn on your Bluetooth device and make it “discoverable”
by turning on Bluetooth mode (check in Options or
Settings).
2. Press and hold the Power Button to turn on the iBT77.
The first time the unit is powered on, it will enter
auto-pairing mode: the unit will beep and the Bluetooth
status indicator light on top of the unit will flash quickly
while the unit attempts to pair. “iHome iBT77” should
appear in your device’s Bluetooth menu. Select “iHome
iBT77” on device to begin/complete pairing. If prompted
for a passcode, enter “1234” on your device’s keypad. 1
beep will sound and the Bluetooth status indicator light
will appear solid blue , indicating the iBT77 is paired and
ready to play music. There should also be an indication on
your device. If no device is successfully paired within 3
minutes the iBT77 will default to previous mode.
3. To pair with a dierent device or at a dierent time, make
sure unit is powered on, then press and hold the
Bluetooth/Speakerphone/Play/Pause Button for 2
seconds. Select “iHome iBT77” on device to pair.
Once the iBT77 is paired to a device, it will attempt to
autolink when the device is within range (about 33 feet).
6
Using the iBT77
iHome iBT77
Playing Audio Via Bluetooth
1. Press and hold the Power Button to turn on the unit. The Bluetooth status
indicator will glow solid blue when a linked device is in range and detected. You
can then listen to audio streamed wirelessly from your paired Bluetooth device.
2. Press the
Bluetooth/Speakerphone/Play/Pause Button
to play and pause.
3. Press the –or +Button to adjust the iBT77 volume. You can also adjust volume
from your device.
4. When done listening, press the Power Button to turn the unit OFF. Remember to
turn o your device, too.
Speakerphone Operation
NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a
call. In Wireless Stereo mode, call will only come through left speaker.
1. When a call is received, playing music is muted to hear the ring tone and the
cabinet lights flash green. Press the Bluetooth/Speakerphone Button to
answer the call, or press and hold to reject the call.
2. When a call is completed, press the Bluetooth/Speakerphone Button to end
the call and resume previous function.
7
Using the iBT77
Playing Audio via Aux In
1. Connect micro USB charging/audio cable to the Charging/Aux-in USB Port on
the side of the unit and connect the 3.5mm audio plug end to the headphone or
line-out jack on your audio device.
2. Press and hold the Power Button to turn the unit ON.
3. Power on the audio device and use the controls on the device to play or pause
audio and to navigate tracks.
4. Press the –or +Button to adjust the system volume. You can also adjust
volume from your device.
5. When done listening, press the Power Button to turn the unit OFF. Remember
to turn o your device, too.
NOTE: Make sure Bluetooth audio is not playing or you will not hear aux audio.
Wireless Stereo Mode
The iBT77 features Wireless Stereo capability, allowing you to enjoy real stereo
sound when two iBT77 speakers are linked (additional speaker sold separately).
1. Press and hold the Power Button on BOTH speakers within 10 seconds.
2. Press and hold the Bluetooth/Speakerphone Button AND the – Button together
at the same time on each speaker to begin linking process. The status indicator
on the speaker will flash green.
3. When linked, a voice will announce “LEFT CHANNEL” and “RIGHT CHANNEL”
and the status indicator on the right speaker will glow solid green.
4. Delete earlier instances of “iHome iBT77” from your device Bluetooth menu. Then
re-pair speakers to Bluetooth device.
5. Press the
Bluetooth/Speakerphone/Play/Pause Button
to play, pause and
navigate tracks.
6. Press the –or +Button to adjust the iBT77 volume. You can also adjust volume
on your device.
7. Press the Power Button on EITHER speaker to turn both speakers OFF.
8
Using the iBT77
8
Unit doesn’t respond (no power, locked up/ “frozen”)
• Make sure unit is completely charged.
• Check that all connections are correct and properly plugged in.
• Make sure your device is properly paired with the iBT77.
• Make sure the unit is on
• If the unit does not respond, try resetting the unit. Insert the end of a
paperclip or similar into the Reset Port located on the bottom of the unit.
Note that doing so will clear settings.
• To reset Bluetooth, press and hold the Bluetooth Button for 10 seconds.
Trouble pairing device with iBT77
Bluetooth implementation varies depending on your device’s hardware and
operating system. Please see our website for updates on pairing.
• When you power ON the speaker, it will automatically link with the last
previously paired Bluetooth device if the device is still within range
(about 33 feet).
• If your device does not auto-link when within range, re-pair the device. To
do so, first delete the iBT77 from your Bluetooth device’s menu.
• Make sure your device is working properly. Check your device’s manual
for details on Bluetooth pairing and linking.
For further information and to see the latest instructions, visit
www.ihome.com/support
9
Troubleshooting
Table des matières
Autres manuels iHome Intervenants
iHome
iHome iBT74 Manuel utilisateur
iHome
iHome iDM8 Mode d’emploi
iHome
iHome iHRK-500S-PR Manuel utilisateur
iHome
iHome iHM7 Manuel utilisateur
iHome
iHome iZ20 Manuel utilisateur
iHome
iHome iBT371 Manuel utilisateur
iHome
iHome iHRK-400MOBC-PR Manuel utilisateur
iHome
iHome iBT175 Manuel utilisateur
iHome
iHome iDM15 Manuel utilisateur
iHome
iHome iBT56 Manuel utilisateur
iHome
iHome iBT66 Manuel utilisateur
iHome
iHome PLAYGLOW+ iBT820 Manuel utilisateur
iHome
iHome iHRK-500LTMS Manuel utilisateur
iHome
iHome iBT36 Manuel utilisateur
iHome
iHome POWERCLOCK GLOW Manuel utilisateur
iHome
iHome Zenergy CANDLE iZBT110 Manuel utilisateur
iHome
iHome iBT62 Manuel utilisateur
iHome
iHome iBT371 Manuel utilisateur
iHome
iHome aquio Manuel utilisateur
iHome
iHome iDM14 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur