IHome IBN16 Manuel utilisateur

iBN16

instruction manual

iBN16 IB

Size: 153mm x 120mm

Printing color: Black

Jun 17, 13. P1

Portable Rechargeable

NFC Bluetooth Speaker

anua

iBN16

Introduction

Thank you for purchasing the iHome iBN16. This product is designed to provide high quality wireless

sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.

Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic

operation and care of the unit. Please read them carefully and keep for future reference.

This unit features NFC (near field communication) technology which allows you to wirelessly connect

your NFC–enabled device to instantly ‘pair and play’. See your device’s user manual for details on how

to interact with NFC devices.

If your Bluetooth device does not support NFC, you can pair it manually with this unit.

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other

protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,

such as benzene, thinner or similar materials can damage the surface of the unit.

Maintenance

iBN16

FCC Information

FCC ID: EMOIBN16

IC: 986B-IBN16

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

•NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

This Device complies with RSS-102 of the IC Rules; Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may cause undesired operation.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF

exposure, users can obtain Canadian information on RF exposure and compliance.

iBN16

Table of Contents

Meet Your iBN16.......................................................................................................... 1-2

Charging the Unit.............................................................................................................3

Using Bluetooth: Pairing Your Device Using NFC ....................................................................4

Using Bluetooth: Pairing Your Device Manually........................................................................5

Playing Audio Via Bluetooth................................................................................................6

Playing Audio Via Aux.......................................................................................................7

Internal Rechargeable Lithium-ion Battery...............................................................................8

Consumer Product Safety Guide..................................................................................... 9-10

Troubleshooting..............................................................................................................11

Warranty......................................................................................................................12

Meet Your iBN16

iBN16

Power Off/Bluetooth/Aux Switch

Aux-out Jack

Power/Charging/Pairing

Indicator Light

Micro USB Charging Port

Back

iBN16

Included

• iBN16 system

• Micro USB to USB/3.5 mm audio cable

iBN16

Using the

Charging the Unit

1.Connect the micro USB plug to the micro USB

charging port on the back of the unit.

2.Connect the standard USB plug end of the

cable to a power USB port on a computer or

other USB charging device. For first time use,

charge unit for about 8 hours.

3. The Power/Charging/Pairing Indicator Light

on the back of the unit glows red steadily

while the unit is charging and turns OFF once

the unit is fully charged.

NOTE: When the unit is on and not connected to a

power source, the Power/Charging/Pairing Indicator

Light flashing red means the battery needs charging.

USB 2.0

iBN16

Using the

Using Bluetooth: Pairing and Playing Your Device Using NFC

This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play

instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your

Device Manually”.

1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability

(typically under ‘Settings’) as described in the device’s user manual.

2. Slide the Power OFF/Bluetooth/Aux Switch on the speaker unit to position.

Use the controls on your device to play or pause audio, adjust volume, and navigate tracks.

6. When done listening, slide the Power OFF/Bluetooth/Aux Switch to the position to turn the unit

OFF. Remember to turn off your audio device, too.

NOTE: To disconnect your device, simply touch it again on the NFC antenna on top of the unit. To pair a

device manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.

3. Place your NFC–enabled device in play mode.

4. Touch the NFC area of your playing device against the NFC antenna on

top of the unit. The unit will enter automatic pairing mode, tones will

sound and the Power/Charging/Pairing Indicator will flash red and

blue while the unit attempts to pair. If prompted, accept Bluetooth

pairing. “iHome iBN16” should appear on your device’s menu.

Once

paired with a device, the Power/Charging/Pairing Indicator light on the

back of the unit will glow steadily and your music will play through the

unit.

NFC antenna

Using Bluetooth: Pairing Your Device Manually

Pairing with a Different Device

iBN16

Using the

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user

manual.

2. Slide

the Power OFF/Bluetooth/Aux Switch on the unit to the position. The unit will turn on and attempt

to auto link to a previously paired device for 10 seconds, indicated by a 3 note tone and the

Power/Charging/Pairing Indicator Light on the back of the unit flashing blue. If a linked device is found,

the indicator will glow solid blue.

3. If no linked device is found, the unit will enter pairing mode, indicated by a 1 note tone and the

Power/Charging/Pairing Indicator Light on the back of the unitwill flash blue and red while the unit

attempts to pair. “iHome iBN16” should appear on your device’s menu. On some devices, tap on the

device name to begin pairing. If your device asks for a password, enter 1234 on the keyboard of your

device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to auto link mode.

To retry pairing, move the Power OFF/Bluetooth/Aux Switch to the position then move it back to the

position.

Once paired with a device, the

Power/Charging/Pairing Indicator Light on the back of the unit

will glow

blue steadily. There should be an indication on your device that pairing is complete. On some devices, you

must then select “Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device

should link to the iBN16 whenever within range.

1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth device

as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must

turn off the Bluetooth capability of the already paired device.

Playing Audio Via Bluetooth

P10

1. Slide the Power OFF/Bluetooth/Aux Switch to the position to listen to audio streamed wirelessly

from your paired iPad, iPhone, iPod or other Bluetooth device.

The Power/Charging/Pairing Indicator Light on the back of the unit will flash blue and a 3 note

tone will sound as the unit searches for a previously paired device, and then turn solid blue once a

previously paired device is detected.

2. Use the controls on your device to play or pause audio, navigate tracks and control volume from

your Bluetooth device.

3. When done listening, move the Power OFF/Bluetooth/Aux Switch to the position to turn the

unit off.

iBN16

Using the

Table des matières

Autres manuels iHome Intervenants

iHome

iHome iDM8 Mode d’emploi

iHome

iHome iBT372 Manuel utilisateur

iHome

iHome iH19 Manuel utilisateur

iHome

iHome iZBT5 Manuel utilisateur

iHome

iHome iBT73 Manuel utilisateur

iHome

iHome DF-M12 Manuel du propriétaire

iHome

iHome iBT66 Manuel utilisateur

iHome

iHome Star Wars MILLENNIUM FALCON iHome Li-B17E7 Manuel utilisateur

iHome

iHome iBT371 Manuel utilisateur

iHome

iHome nickelodeon TM-M66D Manuel utilisateur

iHome

iHome iZ20 Manuel utilisateur

iHome

iHome PLAYGLOW+ iBT820 Manuel utilisateur

iHome

iHome iBT75 Manuel utilisateur

iHome

iHome iBT12 Manuel utilisateur

iHome

iHome iBT39 Manuel utilisateur

iHome

iHome DF-M66 Manuel utilisateur

iHome

iHome TIMEBOOST iBTW41 Manuel utilisateur

iHome

iHome Baby iZ44 Manuel utilisateur

iHome

iHome iBT682 Manuel utilisateur

iHome

iHome Voice iGV1 Manuel utilisateur

iHome

iHome DF-M63 Manuel utilisateur

iHome

iHome iBT371 Manuel utilisateur

iHome

iHome iBT74 Manuel utilisateur

iHome

iHome Beauty iCVBT5 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

iHome iBN16 Manuel utilisateur

Manuels Intervenants populaires d'autres marques