IHome IBT374 Manuel utilisateur

Color Changing Rechargeable

Bluetooth Speaker

with Speakerphone

instruction manual

CHARGE

BEFORE

USE

Model: iBT374

Introduction

Thank you for purchasing the iHome iBT374. This product is designed to

provide high quality wireless sound for your Bluetooth audio device

wherever you take it. iP67 rating means the unit is tested to be waterproof

and dustproof. It also meets military specs for being shockproof.

This instruction booklet explains the basic operation and care of the unit.

Please read it carefully and keep for future reference.

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or

excessive heat.

• Protect your furniture when placing your unit on a natural wood and

lacquered finish. A cloth or other protective material should be placed

between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water.

Stronger cleaning agents, such as thinner or similar materials can damage

the surface of the unit.

iBT374

What’s Included

• iBT374 speaker

• USB charging cable

• Carry strap

• USB AC adaptor

iBT374

Carry strap

USB charging cable

USB AC adaptor

iBT374

IMPORTANT INFORMATION ABOUT

WATERPROOF OPERATION

water

tight

not

water

tight

For proper waterproof operation, make sure the waterproof cover

on the right side of the unit is completely flush with the unit by

pressing along the entire edge of the cover until it is completely

and securely in place.

• The unit is IP67 waterproof rated, meaning it is immersible for

up to 30 minutes at a depth of 1 meter (3 feet). It will typically

withstand rain, snow and being submersed in shallow water.

Longer duration or deeper immersion that exceeds the tested

limits may cause product failure and void the warranty.

• DO NOT immerse the unit in water for extended periods.

• DO NOT immerse the unit in water deeper than 1 meter (about

3 feet).

• Make sure cover and surrounding surfaces are completely dry

before opening cover to prevent moisture from damaging the

internal electronics.

• Keep rubber cover free of dirt, sand, or other objects that can

interfere with proper sealing. If for any reason the waterproof

cover is not making a tight waterproof seal water may enter

the unit.

• Rinse with tap water after immersion in salt water or

swimming pool.

• DO NOT clean unit with oily soaps or use chemicals or

solvents. Clean with damp cloth.

iBT374

Front

Right Side

(under rubber seal)

USB In

Charging Port

USB Out

Charging Port

Aux-in Jack

Reset Port

Meet Your iBT374

Top

Bluetooth Status

Indicator Light

Color Mode

Button

Power

Button

Lower/Raise Volume

Buttons

Bluetooth/

Speakerphone

Button

Play/Pause/

Voice Command

Button

Microphone

Battery Status

Indicator Lights

(portable/battery

mode only)

Getting Started: Carry Strap

The iBT374 has a channel on the left

side of the unit to attach the included

carry strap. To attach the carry strap,

form a small loop in one end of the

carry strap. Insert this loop through

the desired channel, then pull the loop

back through the larger loop formed in

the carry strap to tighten.

CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING

1. Connect the micro USB plug on the included USB charging cable to the

micro USB IN Charging USB Port on the right side of the unit under the

rubber seal.

2. Connect the standard USB plug end of the cable to a power USB port on

a computer, a USB AC adaptor or other USB charging device. For first

time use, charge unit for about 4 hours. The status indicator LEDs on

front of the unit cycle progressively while charging and turn solid once

unit is fully charged.

iBT374

Charge via computer USB port, USB AC adaptor or other powered USB port

USB AC adaptor

(included)

USB AC adaptor

connected to working outlet

iHome iBT374 USB

in Charging port

Reviewing Battery Charge Level

(Portable/Battery Mode: Charger is Disconnected and unit is ON)

When unit is ON but not charging (operating on battery, micro USB cable

not connected) you can review the current battery status on the Battery

Status Indicator Lights (four white LEDs on front of the unit above the

iHome badge) any time a button is pressed.

TIP: On some iOS (Apple) devices, you can

view the iBT374 battery status on your

device’s screen. When device is paired

and connected, look for a vertical battery

icon next to the Bluetooth icon on the

upper right corner of the

device’s screen.

iBT374

Battery

dead

(no charge)

Battery

low

(needs

charging)

Battery

half

charged

Battery

good

mostly

charged

Battery

fully

charged

Battery Indication During Charging

While the battery is charging, the Battery Status Indicator Lights will flash in

a continuous cycle showing progressively fuller battery. The LEDs will stop

flashing once the battery is fully charged.

Pairing Your Device

Pairing is the set-up process to introduce your Bluetooth-capable device to

the iBT374. Once your device is paired, the iBT374 can recognize it and you

can play your audio through it.

1. Turn on your Bluetooth device and make it “discoverable”

by turning on Bluetooth mode (check in Options or

Settings).

2. Press and hold the Power Button for 2 seconds to turn on

the iBT374. The first time the unit is powered on, it will

enter auto-pairing mode: the unit will beep, the Bluetooth

status indicator light on front of the unit will flash quickly

and a voice will announce “PAIRING” while the unit attempts

to pair. (If Color Mode is on, the accent lights will flash blue

and red.)

3. “iHome iBT374” should appear in your device’s Bluetooth

menu. Select “iHome iBT374” on device to complete pairing.

If prompted for a passcode, enter “1234” on your device’s

keypad. 1 beep will sound, the voice will announce

“CONNECTED” and the Bluetooth status indicator light will

appear solid blue (in Color Mode, cabinet will flash blue

twice), indicating the iBT374 is paired and ready to play

music. There should also be an indication on your device.

If no device is successfully paired within 3 minutes the

iBT374 will default to previous mode.

4. To pair with a different device or at a different time, make

sure unit is powered on, then press and hold the

Bluetooth/Speakerphone Button for 2 seconds. Select

“iHome iBT374” on device to pair.

Once the iBT374 is paired to a device, it will attempt to

autolink when the device is within range (about 33 feet).

To delete all Bluetooth paired devices from the iBT374,

press and hold the Bluetooth/Speakerphone Button for

10 seconds.

Using the iBT374

iHome iBT374

Playing Audio Via Bluetooth

1. Press and hold the Power Button for 2 seconds to turn on the unit. The

Bluetooth status indicator will glow solid blue when a linked device is in

range and detected. You can then listen to audio streamed wirelessly from

your paired Bluetooth device.

2. Press the Play/Pause/Voice Command Button to play and pause tracks.

3. Press the or Button to adjust the iBT374 volume. You can also adjust

volume on your device.

4. When done listening, press and hold the Power Button for 2 seconds to

turn the unit OFF.

Speakerphone Operation

NOTE: The unit must be powered on and linked to a Bluetooth phone to

receive a call.

1. When a call is received, playing music is muted to hear the ring tone and

the cabinet lights flash green. Press the Bluetooth/Speakerphone

Button to answer the call, or press and hold to reject the call. For call

waiting function, press the button again to answer a second call, and once

more to return to the original call. Press and hold to end the current call

and return to a remaining call.

2. When a call is completed, press the

Bluetooth/Speakerphone Button

to end the call and resume previous function.

Voice Commands

NOTE: The unit must be powered on and linked to a Bluetooth phone to use voice

commands.

Press and hold the Play/Pause/Voice Command Button to access the

voice command protocol associated with your device’s operating system

(Siri for iOS devices, “OK, Google” for Android devices, etc.

Using the iBT374

Playing Audio via Aux In

1. Connect a standard stereo audio cable (not included) to the Aux-in Jack

on the right side of the unit and connect the other end to the headphone

or line-out jack on your audio device.

2. Press and hold the Power Button for 2 seconds to turn on the unit.

3. Power on the audio device and use the controls on the device to play or

pause audio and to navigate tracks.

4. Press the or Button to adjust the iBT374 volume. You can also adjust

volume on your device.

5. When done listening, press and hold the Power Button for 2 seconds to

turn off the unit. Remember to turn off your device, too.

NOTE: Any Bluetooth audio must be paused or you will not hear Aux-in audio.

Using Color Modes

There are six color modes, which you cycle through in this order:

a. Slow Fade (colors slowly fade from one into the next

b. Fast Change (colors change rapidly)

c. One Color (select a favorite color)

d. Pulse to Music (lights flash to the beat of the music)

e. Preset Pulsing (each light array pulses through its own preset pattern of

colors)

f. Off (no display)

1. Press and hold the Power Button for 2 seconds to turn on the unit.

2. Press the Color Mode Button repeatedly to cycle to the desired color

mode. For One Color mode, first cycle to Fast Change mode and press the

Color Mode Button when the desired color appears. For Pulse to Music,

make sure the volume on your connected Bluetooth device is above 30%.

3. Press and hold the Power Button for 2 seconds to turn the unit off.

Using the iBT374

Table des matières

Autres manuels iHome Intervenants

iHome

iHome iBT371 Manuel utilisateur

iHome

iHome iHome iHM59 Manuel utilisateur

iHome

iHome iBN16 Manuel utilisateur

iHome

iHome iBT91 Manuel utilisateur

iHome

iHome iBT12 Manuel utilisateur

iHome

iHome iH8 Manuel utilisateur

iHome

iHome iBN27 Mode d’emploi

iHome

iHome iBT175 Manuel utilisateur

iHome

iHome DF-M66 Manuel utilisateur

iHome

iHome iBT67 Manuel utilisateur

iHome

iHome iBT15 Manuel utilisateur

iHome

iHome iBT8080 Manuel utilisateur

iHome

iHome Voice iGV1 Manuel utilisateur

iHome

iHome iWBT1 Manuel utilisateur

iHome

iHome iBT56 Manuel utilisateur

iHome

iHome iBN24 Manuel utilisateur

iHome

iHome HW4 Manuel utilisateur

iHome

iHome iBT85 Manuel utilisateur

iHome

iHome iBT60 Manuel utilisateur

iHome

iHome iHM78 Manuel utilisateur

iHome

iHome iZ20 Manuel utilisateur

iHome

iHome iDM14 Manuel utilisateur

iHome

iHome iHSI-W400BT-PR-BLK Manuel utilisateur

iHome

iHome Beauty REFLECT TRIFOLD iCVBT4 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

iHome iBT374 Manuel utilisateur

Manuels Intervenants populaires d'autres marques