IHome IBT682 Manuel utilisateur

True Wireless Stereo

Color Changing

Rechargeable

Bluetooth Speakers

with Speakerphone

instruction manual

Model: iBT682

CHARGE

BEFORE

USE

Introduction

Thank you for purchasing the iHome iBT682. This product is designed to

provide True Wireless stereo sound for your Bluetooth audio device. Each

speaker can also be used separately. This instruction booklet explains the

basic operation and care of the unit. Please read them carefully and keep for

future reference.

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or

excessive heat.

• Protect your furniture when placing your unit on a natural wood and

lacquered finish. A cloth or other protective material should be placed

between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water.

Stronger cleaning agents, such as benzene, thinner or similar materials

can damage the surface of the unit.

iBT682

What’s Included

• 2 x iBT682 speakers

• 2x USB charging cables

iBT682 speakers

USB charging cables

iBT682

Front

Back

Meet Your iBT682

Bottom

Top

NOTE: only one of the two speakers is

show below; they are identical.

Bluetooth/

Speakerphone

Button

Color Mode

Button

USB

Charging

Port

Red Charging/

Battery Indicator Light

Blue/Green Status Indicator Light

Blue = Bluetooth Status

(single speaker)

Green = True Wireless Mode

Bluetooth Status

(both speakers)

Power off/on Switch

Microphone

o on

Service Number:

Charging Voltage:

iBT682-A-A

DC 5V, 500mA

IC: 986B-IBT682

FCC ID: EMOIBT682

iBT682

Patents: www.ihome.com/patents

www.ihome.com

Toll Free: 1-800-288-2792

Manufactured and Serviced

by SDI Technologies Inc.

Designed in the USA

Made in China

Getting Started: Charging the Speakers

CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING

1. Connect the micro USB plug on the included combination cable to the

micro USB Charging/Aux-in USB Port on the side of the unit.

2. Connect the standard USB plug end of the cable to a powered USB

port on a computer, a USB AC adaptor or other USB charging device.

For first time use, charge each speaker for about 4 hours. The red

charge status indicator LED on top of the speaker glows while speaker

is charging.

Note: When unit is ON and not charging, the LED flashing red indicates

low battery (speaker needs charging).

iBT682

Charge via computer USB port, USB AC adaptor or other powered USB port

iHome iBT682 USB port

USB AC adaptor

(not included)

USB AC adaptor

connected to working outlet

iHome iBT682 USB port

Computer USB port

Computer

connected to

working

outlet

TIP: On some iOS (Apple) devices, you can view

the iBT682 battery status on your device’s screen.

When device is paired and connected, look for a

vertical battery icon next to the Bluetooth icon on

the upper right corner of the device’s screen.

Getting Started: First Time Use

True Wireless Stereo

Each of your iBT682 speakers are pre-synced to one another for True Wireless

stereo operation. This sync is permanent (neither speaker can be synced with

a different or third speaker). True Wireless link range is about 5 meters (about

16 feet). If one of the speakers is moved out of True Wireless range, the stereo

link between the two speakers will fail.

Power ON both speakers within 10 seconds for True Wireless

Slide the Power Off/On Switch located on the bottom of each speaker to ON

to turn it on and start True Wireless link. Tones will sound and each speaker

will flash green while attempting to establish a link. The indicator on the top

of each speaker will glow green when the True Wireless stereo link is successful

and an audio prompt will identify each speaker as left channel or right

channel. After successful True Wireless linking, the speakers will enter Bluetooth

pairing mode (see below). After first time power on, user must pair manually

(see page 6).

NOTE: Once speakers are linked, powering OFF one speaker will also turn the

other speaker off. To turn that speaker back on, move the Power Off/On Switch

to OFF then back to ON.

Using the iBT682

Left Speaker

o on

Patents: www.ihome.com/patents

www.ihome.com

Toll Free: 1-800-288-2792

Manufactured

and

Serviced

by SDI Technologies Inc.

Designed in the USA

Made in China

Right Speaker

o on

Patents: www.ihome.com/patents

www.ihome.com

Toll Free: 1-800-288-2792

Manufactured

and

Serviced

by SDI Technologies Inc.

Designed in the USA

Made in China

True Wireless range

about 5 Meters/16.4 feet

Bluetooth: Pairing Your Device the First Time

Pairing is the set-up process to introduce your Bluetooth-capable device to

the iBT682. Once your device is paired, the speakers can recognize it and you

can play your audio through them. Turn on your Bluetooth device and make

it “discoverable” by turning on Bluetooth mode (check in Options or Settings).

• The first time both speakers are turned on, after establishing the True Wireless

link, the speakers will enter auto-pairing mode and attempt to connect to a

Bluetooth device. The status indicator light on the top of each speaker will

flash quickly and the left speaker will flash blue.

• “iHome iBT682” should appear in your device’s Bluetooth menu. Select “iHome

iBT682” to connect it. If prompted for a passcode, enter “1234” on your device’s

keypad.

If pairing is successful, 1 beep will

sound and the status indicator

light will appear solid on each

speaker, indicating the iBT682 is

ready to play music. There should

also be an indication on your

device. If no device is successfully

paired within 3 minutes the

iBT682 will default to standby

mode. Once the iBT682 is paired

to a device, it will attempt to

autolink when the device is

within Bluetooth range (about

33 feet).

Manual Pairing

1. Slide the Power Off/On Switch on each speaker to ON. True

Wireless linking should take about 10 seconds.

2. Press and hold the Bluetooth Button (located on the back) on

the left speaker for 2 seconds.

3. Select “iHome iBT682” on your device’s Bluetooth menu to

complete pairing.

Using the iBT682

For iPhone

iHome iBT682 iHome iBT682

For other

Pairing with a Single iBT682 Speaker (Mono Operation)

To use a single speaker, just turn one on instead of both. To use both speakers

separately, place each outside of True Wireless range (about 16 feet) then turn

on and pair each speaker separately with a different device. When separately

paired speakers are returned to within True Wireless range, each will maintain

separate pairing unless one is powered off then powered back on, in which case

it will attempt True Wireless linking. Note: Each separately paired speaker will

appear on your device as “iHome iBT682” (just as when you pair both speakers

together). You can select the desired instance or remove “iHome iBT682” and

re-pair unit(s) again.

Playing Audio Via Bluetooth

1. Slide the Power Off/On Switch on BOTH speakers to ON within 10 seconds.

Following True Wireless linking,the Bluetooth status indicator will glow solid blue

when a linked device is in range and detected. You can then listen to audio

streamed wirelessly from your paired Bluetooth device.

2. Use controls on your Bluetooth device to adjust volume and to play, pause and

navigate tracks.

3. When done listening, slide the Power Off/On Switch to OFF on both speakers.

Speakerphone Operation

NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a

call.

1. When a call is received, playing music is muted to hear the ring tone and the

cabinet lights flash green. Press the Bluetooth/Speakerphone Button to

answer the call, or press and hold to reject the call. For call waiting function,

press the button again to answer a second call, and once more to return to the

original call. Press and hold to end the current call and return to a remaining call.

2. When a call is completed, press the Bluetooth/Speakerphone Button to end

the call and resume previous function.

Using the iBT682

Using Color Modes

There are five color modes, which you cycle through in this order:

a. Slow Fade (colors slowly fade from one into the next

b. Fast Change (colors change rapidly)

c. One Color (select a favorite color)

d. Pulse to Music (lights flash to the beat of the music)

e. Off (no display)

1. Slide the Power Off/On Switch to ON to turn the unit ON.

2. Press the Color Mode Button repeatedly on either speaker to cycle to the

desired color mode. For One Color mode, first cycle to Fast Change mode then

press the Color Mode Button when the desired color appears. For Pulse to

Music, make sure the volume on your connected Bluetooth device is above 50%.

3. When done, slide the Power Off/On Switch to OFF to turn the unit OFF.

Using the iBT682

Unit doesn’t respond (no power)

• Make sure unit is completely charged.

• Check that all connections are correct and properly plugged in.

• Make sure your device is properly paired with the iBT682.

• Make sure the unit is on

Unit doesn’t respond (locked up/ “frozen”)

If the unit does not respond, try resetting the unit. Press and hold the

Bluetooth Button for about 10 seconds. Note that doing so will clear

settings, and any Bluetooth devices will need to be re-paired.

Trouble pairing device with iBT682

Bluetooth implementation varies depending on your device’s hardware and

operating system. Please see our website for updates on pairing.

• When you power ON the speaker, it will automatically link with the last

previously paired Bluetooth device if the device is still within range

(about 33 feet). To pair with a different device you must turn off

Bluetooth capability on the already paired device, or take it out of range.

• If your device does not auto-link when within range, re-pair the device. To

do so, first delete the iBT682 from your Bluetooth devices menu.

• Make sure your device is working properly. Check your device’s manual

for details on Bluetooth pairing and linking.

For further information and to see the latest instructions, visit

www.ihome.com/support

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

Troubleshooting

Table des matières

Autres manuels iHome Intervenants

iHome

iHome PLAYFADE iBT400 Manuel utilisateur

iHome

iHome iWBT1 Manuel utilisateur

iHome

iHome iBN16 Manuel utilisateur

iHome

iHome iBT74 Manuel utilisateur

iHome

iHome iBN19 Manuel utilisateur

iHome

iHome POWERCLOCK GLOW iBT295 Manuel utilisateur

iHome

iHome iBT77 Manuel utilisateur

iHome

iHome iBT73 Manuel utilisateur

iHome

iHome iBT371 Manuel utilisateur

iHome

iHome iBT8080 Manuel utilisateur

iHome

iHome iBT562 Manuel utilisateur

iHome

iHome PetMedics 2P1S0005 Manuel utilisateur

iHome

iHome iBT72 Manuel utilisateur

iHome

iHome iDM8 Mode d’emploi

iHome

iHome ibt88 Manuel utilisateur

iHome

iHome iDM3 Manuel utilisateur

iHome

iHome iBN24 Manuel utilisateur

iHome

iHome iDM11 Manuel utilisateur

iHome

iHome iH19 Manuel utilisateur

iHome

iHome iBT372 Manuel utilisateur

iHome

iHome iBT55 Manuel utilisateur

iHome

iHome iBT32 Manuel utilisateur

iHome

iHome iDM15 Mode d’emploi

iHome

iHome iHPA-1500LT Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

iHome iBT682 Manuel utilisateur

Manuels Intervenants populaires d'autres marques