IHome IBN19 Manuel utilisateur

iBN19

instruction manual

iBN19 Eng IB

Size: 153mm x 120mm

Printing color: Black

Jun 21, 2013 P1

Bluetooth alarm clock

speaker with NFC

and USB charging

iBN19

Introduction

Thank you for purchasing the iHome iBN19. This product is designed to provide high quality wireless

sound for your iPad, iPhone, iPod or other Bluetooth audio device.

Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic

operation and care of the unit. Please read them carefully and keep for future reference.

This unit features NFC (near field communication) technology which allows you to wirelessly connect your

NFC–enabled device to instantly ‘pair and play’. See your device’s user manual for details on how to

interact with NFC devices. If your Bluetooth device does not support NFC, you can pair it manually with

this unit.

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other

protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,

such as benzene, thinner or similar materials can damage the surface of the unit.

Maintenance

iBN19

FCC Information

FCC ID: EMOIBN19

IC: 986B-IBN19

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter

must not be co-located or operating in conjunction with any other antenna or transmitter.

This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:

(1) This device may not cause interference and

(2) This device must accept any interference received, including interference that may cause undesired operation

iBN19

Table of Contents

Meet Your iBN19.......................................................................................................... 1-3

The Display/Setting Up the Unit ..........................................................................................4

Setting the Clock ..............................................................................................................5

Setting and Using the Alarm/Previewing Alarm ......................................................................6

Snooze/Dimmer Button/Sleep and Nap Modes....................................................................7

Using Bluetooth: Pairing & Playing Your Device Using NFC ......................................................8

Pairing Your Device Using Standard Bluetooth........................................................................9

Playing Audio Via Bluetooth/Playing Audio Via Aux-in...........................................................10

Charging Devices via USB Port ........................................................................................11

Replacing/Installing Backup Batteries.................................................................................12

Troubleshooting..............................................................................................................13

Consumer Product Safety Guide................................................................................... 14-15

Warranty......................................................................................................................16

iBN19

Included

• iBN19 system

• 100V-240V universal AC adaptor

• 3.5mm audio cable

power adaptor

audio cable

iBN19

Meet Your iBN19

Top

Nap/

Clock Set Button

Mode Button

Power Button

NFC Antenna

Minus/

Plus Settings Buttons

Volume Down Button

Volume Up Button

Play/

Pause Button

Sleep Button

Snooze/

Dimmer Button

Alarm Button

DC Jack

Backup Battery Compartment

(pull battery tab before use)

USB Charging Port

Aux-in Jack

iBN19

Meet Your iBN19

Back

Bottom

Pairing Button

iBN19

Using the

Setting Up the Unit

The Display

Connect the included AC adaptor to the DC jack

located on the back of the unit and connect the

other end to a working wall outlet.

Alarm Active Indicator

Aux-in Mode Indicator

Snooze Mode Indicator

Bluetooth Audio Indicator Volume Indicator

Bluetooth

Pairing

Indicator

PM/AM Indicators

Wake to Alarm Source Indicators:

Tone, Bluetooth device

Time Display

Low Backup

Battery Indicator

RESET

TEST

iBN19

Using the

Setting the Clock

1. Press and hold the Nap/Clock Set Button for 2 seconds until the clock display flashes and a beep

sounds.

2. Press the –or +Buttons to adjust the clock to the current time (hold for rapid setting).

Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the

display.

3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display,

press the Alarm Button during time setting.

4. Press the Nap/Clock Set Button to confirm the time and exit clock setting mode. 2 beeps will confirm

clock setting is complete.

iBN19

Using the

Setting and Using the Alarm

P10

Note: each step must be completed while display is flashing or step will time-out with any changes saved.

1. Press and hold the Alarm Button for 2 seconds until the time display and alarm icon flash.

2. Press the –or +Buttons to adjust the alarm time to the desired time (hold for rapid setting).

Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the

display.

3. Press the Alarm Button to confirm the alarm time setting. The wake-to source will flash.

4. Press the –or +Buttons to select the desired wake to alarm source: Bluetooth or tone.

Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is

detected, the alarm will default to current Tone.

Wake to Tone: Press the Alarm Button to confirm. Press the –or +Buttons to select one of the four

built-in wake-to tones.

5. Press the Alarm Button to confirm the alarm source. The volume display will flash.

6. Press the or Buttons to adjust the alarm volume on the unit from 05 - 30. Note that the alarm

volume setting is stored separately from other volume settings.

7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm

clock setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.

Previewing the Alarm and Turning the Alarm On/Off

1. Press and release the Alarm Button to view the current alarm time.

2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm

icon.

Table des matières

Autres manuels iHome Intervenants

iHome

iHome iBT90 Manuel utilisateur

iHome

iHome iBN27 Mode d’emploi

iHome

iHome iBT39 Manuel utilisateur

iHome

iHome Zenergy CANDLE iZBT110 Manuel utilisateur

iHome

iHome iBT16 Manuel utilisateur

iHome

iHome Voice iGV1 Manuel utilisateur

iHome

iHome iBT372 Manuel utilisateur

iHome

iHome iM71 Manuel utilisateur

iHome

iHome PLAYGLOW MINI iBT800 Manuel utilisateur

iHome

iHome iBT520 Manuel utilisateur

iHome

iHome iHPA-800LT Manuel utilisateur

iHome

iHome iDM15 Manuel utilisateur

iHome

iHome iHM78 Manuel utilisateur

iHome

iHome iBT10 Manuel utilisateur

iHome

iHome POWERCLOCK GLOW iBT295 Manuel utilisateur

iHome

iHome Beauty REFLECT TRIFOLD iCVBT4 Manuel utilisateur

iHome

iHome iHRK-500S-PR Manuel utilisateur

iHome

iHome PetMedics 2P1S0005 Manuel utilisateur

iHome

iHome iWBT1 Manuel utilisateur

iHome

iHome iW1 air series Manuel utilisateur

iHome

iHome iBT36 Manuel utilisateur

iHome

iHome iBT16 Manuel utilisateur

iHome

iHome Beauty iCVBT5 Manuel utilisateur

iHome

iHome iHM62 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

iHome iBN19 Manuel utilisateur

Manuels Intervenants populaires d'autres marques