IFM Efector 200 Series Manuel utilisateur

Operating instructions

Through-beam sensor

OGE3xx / OGS3xx

704461 / 01 01 / 2009

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

Range: (→type label).

3 Installation

LED1:

Install the receiver (OGE3xx) and secure it to a bracket.►

Align the transmitter (OGS3xx) to the receiver and secure it in the same way.►

Maximum range only with accurate alignment.

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electri-►

cal equipment must be adhered to.

Ensure voltage supply to EN 50178.►

Disconnect power.►

Connect the unit as follows:►

Transmitter (OGS3xx) connector

L+

pin 1 = L+

(pin 2: not connected)

pin 3 = L-

(pin 4: not connected)

Transmitter (OGS3xx) cable *

L+

BN = L+

BU = L-

Receiver (OGE3xx) connector

L+

pin 1 = L+

(pin 2 = not connected)

pin 3 = L-

pin 4 = load

Receiver (OGE3xx) cable *

L+

BN = L+

BU = L-

BK = load

* Core colours: BN = brown, BU = blue, BK = black

5 Operation

Check whether the unit operates correctly.►

Transmitter (OGS3xx): The green LED is lit when the sensor is ready for•

operation.

Receiver:•

Dark-on switching units (OGE-DPKG): the output is switched / the yellow LED

is lit when an object is detected.

Light-on switching units (OGE-HPKG): the output is switched / the yellow LED

is lit when no object is detected.

6 Maintenance, repair and disposal

Keep the front lenses of the sensor free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic material.

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Autres manuels pour Efector 200 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IFM Accessoires

IFM

IFM O1D120 Manuel utilisateur

IFM

IFM EIO104 Manuel utilisateur

IFM

IFM efector 150 KF Manuel utilisateur

IFM

IFM OY4**S Series Manuel utilisateur

IFM

IFM O5H5 Series Manuel utilisateur

IFM

IFM O2D54 Series Manuel utilisateur

IFM

IFM LDH100 Manuel utilisateur

IFM

IFM Efector 200 OG Manuel utilisateur

IFM

IFM Efector600 TN2531 Manuel utilisateur

IFM

IFM efector 200 OGH Manuel utilisateur

IFM

IFM O6H7 Series Manuel utilisateur

IFM

IFM PN00 A Series Manuel utilisateur

IFM

IFM O2D51 Series Manuel utilisateur

IFM

IFM efector200 OOF Series Manuel utilisateur

IFM

IFM SI 5000 Manuel utilisateur

IFM

IFM PM11 Manuel utilisateur

IFM

IFM PL205 Series Manuel utilisateur

IFM

IFM Efector 100 GG712S Manuel utilisateur

IFM

IFM Efector 500 PY2068 Manuel utilisateur

IFM

IFM IFS Series Manuel utilisateur

IFM

IFM SB1 Series Manuel utilisateur

IFM

IFM PQ3 Series Manuel utilisateur

IFM

IFM O5D15 Series Manuel utilisateur

IFM

IFM SB4 Series Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur