Idp SMART-70 Manuel utilisateur

2016.9.1

SMART-70

User Manual

Users must respect the copyright laws applicable in their country. This manual must not be photocopied,

translated, reproduced or transmitted in whole or in part for any reason and by the means that might be,

albeit electronic or mechanical, without the express, written authorization of IDP Corp., LTD.

All information contained herein may be subject to modification without prior notice. IDP Corp., Ltd. accepts

no liability for any possible errors herein, nor for any accidental damage or damage caused through the

dissemination or the use of this manual.

Trademarks

SMART-70 is a trademark and IDP is a registered trademark of IDP Corp., LTD. Windows is registered

trademark of Microsoft Corp. All other trademarks or registered trademarks are marks of their respective

holders. SMART-70 Design is a trademark of IDP Corp., Ltd.

Return Materials Authorization

In order to make a warranty claim you must contact an IDP Reseller. You will be responsible for packaging the

printer for shipment and the costs of shipping and insurance of the printer from the point of use of the printer

to the IDP Reseller. The IDP Reseller will bear the costs of shipping and insuring the printer from the repair

location to the address from which the printer was shipped.

Before returning any equipment for in-warranty or out-of warranty repair, contact an IDP Reseller or an IDP

Service Center for a Return Materials Authorization (RMA) number.

Repack the equipment in the original packing material and mark the RMA number clearly on the outside of

the box. For more information about RMA or IDP warranty statements, refer to the Warranty booklet on the

quick install guide.

Table of Contents

1. INTRODUCTION...............................................................................................................................................................................................11

1.1 OVERVIEW....................................................................................................................................................................................................... 11

1.2 MODULES........................................................................................................................................................................................................14

1.2.1 Input Hopper

..................................................................................................................................................................................... 14

1.2.2 Printer

...................................................................................................................................................................................................16

1.2.3 Hybrid Flipper

................................................................................................................................................................................... 20

1.2.4 Laminator

............................................................................................................................................................................................21

1.2.5 Output Hopper

.................................................................................................................................................................................25

1.2.6 Stacker

..................................................................................................................................................................................................27

2. INSTALLATION AND OPERATION............................................................................................................................................................28

2.1 HARDWARE INSTALLATION ........................................................................................................................................................................... 28

2.1.1 Placement of Modules

..................................................................................................................................................................28

2.1.2 Module fastening

............................................................................................................................................................................28

2.1.3 Module connection

........................................................................................................................................................................29

2.1.4 Power connection

............................................................................................................................................................................ 30

2.1.5 Print ribbon and laminating film installation

..................................................................................................................... 30

2.1.6 Disposable cleaning roller installation

................................................................................................................................... 34

2.1.7 Cards Loading

................................................................................................................................................................................... 37

2.1.8 Loading card cartridge into Output Hopper

......................................................................................................................41

2.1.9 Power on

............................................................................................................................................................................................. 41

2.1.10 Module combination setting

................................................................................................................................................... 42

2.1.11 System status check

.................................................................................................................................................................... 44

2.1.12 Sample card printing

...................................................................................................................................................................44

2.2 ADVANCED HARDWARE INSTALLATION...................................................................................................................................................... 47

2.2.1 Module ID of SMART-70

.............................................................................................................................................................. 47

2.2.2 System configuration of SMART-70

.......................................................................................................................................49

2.2.3 Cable connection of SMART-70

...............................................................................................................................................51

2.3 SOFTWARE INSTALLATION (WINDOWS VISTA/7/8/10) .......................................................................................................................... 53

3. DRIVER CONFIGURATION...........................................................................................................................................................................58

3.1 PRINTING PREFERENCES................................................................................................................................................................................58

3.1.1 Printing Preferences

....................................................................................................................................................................... 58

3.2 ADVANCED SETUP..........................................................................................................................................................................................61

3.3 OTHER SETTINGS............................................................................................................................................................................................ 63

3.3.1 Sharing

.................................................................................................................................................................................................63

3.3.2 Ports

....................................................................................................................................................................................................... 64

3.3.3 Advanced

............................................................................................................................................................................................. 64

3.3.4 Color Management

......................................................................................................................................................................... 65

3.3.5 Security

................................................................................................................................................................................................. 65

3.3.6 Printer status check

........................................................................................................................................................................ 66

4. SMART-70 UTILITIES......................................................................................................................................................................................67

4.1 PRINTER SETTING ........................................................................................................................................................................................... 67

4.1.1 CardPrinter70Setup

......................................................................................................................................................................... 67

4.1.2 Basic Setup

.........................................................................................................................................................................................68

4.1.3 Advanced Setup

...............................................................................................................................................................................72

4.2 PRINTER TEST..................................................................................................................................................................................................75

4.2.1 Printer selection and basic control

.........................................................................................................................................76

4.2.2 Print Test

.............................................................................................................................................................................................76

4.2.3 Batch Job

............................................................................................................................................................................................. 76

4.2.4 Monitor

................................................................................................................................................................................................76

4.2.5 Printer status

......................................................................................................................................................................................77

4.3 FIRMWARE UPGRADE..................................................................................................................................................................................... 79

4.3.1 Printer connection

...........................................................................................................................................................................80

4.3.2 Module Firmware Upgrade

.........................................................................................................................................................80

5. TROUBLESHOOTING...................................................................................................................................................................................... 82

5.1 PRINTING QUALITY......................................................................................................................................................................................... 82

5.1.1 Unprinted or wrong colors printed spot

..............................................................................................................................82

5.1.2 Unprinted horizontal line

.............................................................................................................................................................82

5.1.3 Blurry or unstable print

................................................................................................................................................................ 82

5.1.4 Not aligned color print

.................................................................................................................................................................83

5.1.5 Unplanned color print

...................................................................................................................................................................83

5.2 CARD SUPPLY..................................................................................................................................................................................................84

5.2.1 Card is not supplied or 2 cards are supplied from Input Hopper

........................................................................84

5.3 CARD JAM....................................................................................................................................................................................................... 84

5.3.1 Card jam in Input Hopper

...........................................................................................................................................................84

5.3.2 Card jam in Printer

......................................................................................................................................................................... 86

5.3.3 Card jam in Hybrid Flipper

.........................................................................................................................................................88

5.3.4 Card jam in Laminator

.................................................................................................................................................................. 89

5.3.5 Card jam in Output Hopper

....................................................................................................................................................... 91

5.4 CLEANING .......................................................................................................................................................................................................92

5.4.1 Input Hopper cleaning

.................................................................................................................................................................. 92

5.4.2 Printer cleaning

................................................................................................................................................................................ 94

5.4.3

Hybrid Flipper cleaning

.................................................................................................................................................................95

5.4.4

Laminator cleaning

..........................................................................................................................................................................95

5.4.5

Output Hopper cleaning

...............................................................................................................................................................96

5.5 TPH (THERMAL PRINT HEAD)REPLACEMENT ..........................................................................................................................................97

5.6 LAMINATOR HEAD REPLACEMENT............................................................................................................................................................... 99

6. SMART-70 SPECIFICATIONS.....................................................................................................................................................................102

6.1 SMART-70 INPUT HOPPER......................................................................................................................................................................102

6.2 SMART-70 PRINTER..................................................................................................................................................................................102

6.3 SMART-70 HYBRID FLIPPER ....................................................................................................................................................................103

6.4 SMART-70 LAMINATOR ...........................................................................................................................................................................103

6.5 SMART-70 OUTPUT HOPPER..................................................................................................................................................................104

Table of Figures

FIGURE 1COMBINATION OF SMART-70............................................................................................................................................................. 11

FIGURE 2FRONT SIDE OF INPUT HOPPER............................................................................................................................................................. 15

FIGURE 3REAR SIDE OF INPUT HOPPER................................................................................................................................................................ 15

FIGURE 4FRONT SIDE OF PRINTER.........................................................................................................................................................................17

FIGURE 5REAR SIDE OF PRINTER ...........................................................................................................................................................................17

FIGURE 6CONTROL PANEL OF PRINTER ................................................................................................................................................................ 18

FIGURE 7FRONT SIDE OF HYBRID FLIPPER ...........................................................................................................................................................20

FIGURE 8REAR SIDE OF HYBRID FLIPPER.............................................................................................................................................................. 21

FIGURE 9FRONT SIDE OF LAMINATOR .................................................................................................................................................................. 22

FIGURE 10 REAR SIDE OF LAMINATOR...................................................................................................................................................................23

FIGURE 11 CONTROL PANEL OF LAMINATOR........................................................................................................................................................23

FIGURE 12 FRONT SIDE OF OUTPUT HOPPER ......................................................................................................................................................26

FIGURE 13 REAR SIDE OF OUTPUT HOPPER......................................................................................................................................................... 27

FIGURE 14 STACKER ..................................................................................................................................................................................................27

FIGURE 15 SMART-70 PLACEMENT OF MODULES ............................................................................................................................................28

FIGURE 16 MODULE FASTENING............................................................................................................................................................................. 29

FIGURE 17 MODULE CONNECTION ........................................................................................................................................................................ 29

FIGURE 18 POWER CONNECTION ...........................................................................................................................................................................30

FIGURE 19 RIBBON /FILM CARTRIDGE UNLOCKING ............................................................................................................................................ 30

FIGURE 20 PULLING OUT RIBBON /FILM CARTRIDGE.......................................................................................................................................... 31

FIGURE 21 PRINT RIBBON /LAMINATING FILM MOUNTING...............................................................................................................................31

FIGURE 22 PRINT RIBBON MOUNTING................................................................................................................................................................... 32

FIGURE 23 LAMINATING FILM MOUNTING............................................................................................................................................................ 32

FIGURE 24 PRINT RIBBON /LAMINATING FILM ALIGNMENT ..............................................................................................................................33

FIGURE 25 RIBBON /FILM CARTRIDGE INSERTION...............................................................................................................................................33

FIGURE 26 RIBBON /FILM CARTRIDGE LOCKING.................................................................................................................................................. 34

FIGURE 27 DETACHMENT OF DISPOSABLE CLEANING ROLLER HOLDER ............................................................................................................34

FIGURE 28 USED DISPOSABLE CLEANING ROLLER REMOVAL ..............................................................................................................................35

FIGURE 29 NEW DISPOSABLE CLEANING ROLLER MOUNTING............................................................................................................................ 35

FIGURE 30 REMOVAL OF NEW DISPOSABLE CLEANING ROLLER PROTECTOR....................................................................................................36

FIGURE 31 INSTALLATION OF DISPOSABLE CLEANING ROLLER HOLDER............................................................................................................36

FIGURE 32 CARD CARTRIDGE RELEASE FROM INPUT HOPPER ...........................................................................................................................37

FIGURE 33 CARDS THICKNESS ADJUSTMENT ........................................................................................................................................................37

FIGURE 34 CARD CARTRIDGE OPEN .......................................................................................................................................................................38

FIGURE 35 REMOVAL OF THE TAPE FOR FIXING THE WEIGHT............................................................................................................................. 38

FIGURE 36 CARD CARTRIDGE’S WEIGHT FIXING....................................................................................................................................................39

FIGURE 37 CARD LOADING...................................................................................................................................................................................... 39

FIGURE 38 PUTTING DOWN THE CARD CARTRIDGE’S WEIGHT...........................................................................................................................40

FIGURE 39 LOADING CARD CARTRIDGE INTO INPUT HOPPER............................................................................................................................40

FIGURE 40 LOADING CARD CARTRIDGE INTO OUTPUT HOPPER .......................................................................................................................41

FIGURE 41 POWER ON .............................................................................................................................................................................................41

FIGURE 42 MODULES COMBINATION CHECKING .................................................................................................................................................42

FIGURE 43 EXISTING MODULES COMBINATION .................................................................................................................................................... 42

FIGURE 44 ADJUSTED MODULES COMBINATION.................................................................................................................................................. 43

FIGURE 45 SAVED MODULE COMBINATION...........................................................................................................................................................43

FIGURE 46 COMPLETED MODULE COMBINATION.................................................................................................................................................43

FIGURE 47 SYSTEM STATUS CHECKING...................................................................................................................................................................44

FIGURE 48 PRINTER MENU ......................................................................................................................................................................................44

FIGURE 49 PRINTER MENU (SYSTEM CONFIG).....................................................................................................................................................45

FIGURE 50 PRINTER MENU (NETWORK CONFIG)................................................................................................................................................. 45

FIGURE 51 PRINTER MENU (PRINTER CONFIG).................................................................................................................................................... 45

FIGURE 52 PRINTER MENU (OPERATION).............................................................................................................................................................. 46

FIGURE 53 PRINTER MENU (PRINT SAMPLE)........................................................................................................................................................46

FIGURE 54 SAMPLE CARD........................................................................................................................................................................................46

FIGURE 55 DIP SWITCH LOCATION OF SMART-70 MODULE...........................................................................................................................48

FIGURE 56 SYSTEM CONFIGURATION OF SMART-70........................................................................................................................................ 49

FIGURE 57 CABLE CONNECTION OF SMART-70 IPHLO.................................................................................................................................. 51

FIGURE 58 CABLE CONNECTION OF SMART-70 IPP........................................................................................................................................51

FIGURE 59 CABLE CONNECTION OF SMART-70 IPHLO.................................................................................................................................. 52

FIGURE 60 CABLE CONNECTION OF SMART-70 IPHPO.................................................................................................................................52

FIGURE 61 PRINTER DRIVER INSTALLATION 1 ....................................................................................................................................................... 53

FIGURE 62 PRINTER DRIVER INSTALLATION 2 ....................................................................................................................................................... 53

FIGURE 63 PRINTER DRIVER INSTALLATION 3 ....................................................................................................................................................... 53

FIGURE 64 PRINTER DRIVER INSTALLATION 4 ....................................................................................................................................................... 53

FIGURE 65 PRINTER DRIVER INSTALLATION 5 ....................................................................................................................................................... 54

FIGURE 66 PRINTER DRIVER INSTALLATION 6 ....................................................................................................................................................... 54

FIGURE 67 PRINTER DRIVER INSTALLATION 7 ....................................................................................................................................................... 54

FIGURE 68 PRINTER DRIVER INSTALLATION 8 ....................................................................................................................................................... 54

FIGURE 69 PRINTER DRIVER INSTALLATION 9 ....................................................................................................................................................... 55

FIGURE 70 PRINTER DRIVER INSTALLATION 10.....................................................................................................................................................55

FIGURE 71 PRINTER DRIVER INSTALLATION 11.....................................................................................................................................................55

FIGURE 72 PRINTER DRIVER INSTALLATION 12.....................................................................................................................................................55

FIGURE 73 PRINTER DRIVER INSTALLATION 13.....................................................................................................................................................56

FIGURE 74 PRINTER DRIVER INSTALLATION 14.....................................................................................................................................................56

FIGURE 75 APPLICATION INSTALLATION 1.............................................................................................................................................................56

FIGURE 76 APPLICATION INSTALLATION 2.............................................................................................................................................................57

FIGURE 77 APPLICATION INSTALLATION 3.............................................................................................................................................................57

FIGURE 78 APPLICATION INSTALLATION 4.............................................................................................................................................................57

FIGURE 79 APPLICATION INSTALLATION 5.............................................................................................................................................................57

FIGURE 80 APPLICATION INSTALLATION 6.............................................................................................................................................................58

FIGURE 81 PRINTER PROPERTIES WINDOW ...........................................................................................................................................................58

FIGURE 82 LAYOUT ...................................................................................................................................................................................................59

FIGURE 83 INPUT /OUTPUT SETTINGS..................................................................................................................................................................59

FIGURE 84 PRINTING SETTINGS...............................................................................................................................................................................60

FIGURE 85 LAMINATING SETTINGS .........................................................................................................................................................................60

FIGURE 86 ENCODING SETTINGS ............................................................................................................................................................................61

FIGURE 87 PRINTER SHARING SETTINGS................................................................................................................................................................63

FIGURE 88 PORTS SETTING ...................................................................................................................................................................................... 64

FIGURE 89 ADVANCED SETTINGS............................................................................................................................................................................64

FIGURE 90 COLOR MANAGEMENT SETTINGS .......................................................................................................................................................65

FIGURE 91 SECURITY SETTING.................................................................................................................................................................................65

FIGURE 92 PRINTER STATUS CHECK........................................................................................................................................................................ 66

FIGURE 93 CARDPRINTER70SETUP LOG-IN ......................................................................................................................................................... 67

FIGURE 94 CARDPRINTER70SETUP START............................................................................................................................................................68

FIGURE 95 BASIC SETUP OF CARDPRINTER70SETUP.......................................................................................................................................... 68

FIGURE 96 COLOR DENSITY .....................................................................................................................................................................................70

FIGURE 97 RESIN BLACK DENSITY .......................................................................................................................................................................... 71

FIGURE 98 OVERLAY DENSITY .................................................................................................................................................................................71

FIGURE 99 ADVANCED SETUP.................................................................................................................................................................................72

FIGURE 100 ARDPRINTER70TEST ...........................................................................................................................................................................75

FIGURE 101 MONITOR.............................................................................................................................................................................................76

FIGURE 102 CARDPRINTER70FIRMWARE.............................................................................................................................................................. 79

FIGURE 103 MODULES OF SMART-70 SYSTEM (PRINTER,HYBRID FLIPPER)............................................................................................... 80

FIGURE 104 READY FOR FIRMWARE UPGRADE.....................................................................................................................................................80

FIGURE 105 MANUAL FIRMWARE UPGRADE.........................................................................................................................................................81

FIGURE 106 PRINTING QUALITY TROUBLE 1......................................................................................................................................................... 82

FIGURE 107PRINTING QUALITY TROUBLE 2......................................................................................................................................................... 82

FIGURE 108 PRINTING QUALITY TROUBLE 3......................................................................................................................................................... 82

FIGURE 109 PRINTING QUALITY TROUBLE 4......................................................................................................................................................... 83

FIGURE 110 PRINTING QUALITY TROUBLE 5......................................................................................................................................................... 83

FIGURE 111 CARD SUPPLY PROBLEM 1................................................................................................................................................................. 84

FIGURE 112 CARD JAM IN INPUT HOPPER 1.......................................................................................................................................................84

FIGURE 113 CARD JAM IN INPUT HOPPER 2.......................................................................................................................................................85

FIGURE 114 CARD JAM IN INPUT HOPPER 3.......................................................................................................................................................85

FIGURE 115 CARD JAM IN INPUT HOPPER 4.......................................................................................................................................................85

FIGURE 116 CARD JAM IN INPUT HOPPER 5.......................................................................................................................................................86

FIGURE 117 CARD JAM IN PRINTER 1...................................................................................................................................................................86

FIGURE 118 CARD JAM IN PRINTER 2...................................................................................................................................................................86

FIGURE 119 CARD JAM IN PRINTER 3...................................................................................................................................................................87

FIGURE 120 CARD JAM IN PRINTER 4...................................................................................................................................................................87

FIGURE 121 CARD JAM IN PRINTER 5...................................................................................................................................................................87

FIGURE 122 CARD JAM IN HYBRID FLIPPER 1...................................................................................................................................................... 88

FIGURE 123 CARD JAM IN HYBRID FLIPPER 2...................................................................................................................................................... 88

FIGURE 124 CARD JAM IN HYBRID FLIPPER 3...................................................................................................................................................... 88

FIGURE 125 CARD JAM IN HYBRID FLIPPER 4...................................................................................................................................................... 89

FIGURE 126 CARD JAM IN LAMINATOR 1............................................................................................................................................................. 89

FIGURE 127 CARD JAM IN LAMINATOR 2............................................................................................................................................................. 89

FIGURE 128 CARD JAM IN LAMINATOR 3............................................................................................................................................................. 90

FIGURE 129 CARD JAM IN LAMINATOR 4............................................................................................................................................................. 90

FIGURE 130 CARD JAM IN LAMINATOR 5............................................................................................................................................................. 90

FIGURE 131 CARD JAM IN OUTPUT HOPPER 1 ................................................................................................................................................... 91

FIGURE 132 CARD JAM IN OUTPUT HOPPER 2 ................................................................................................................................................... 91

FIGURE 133 CARD JAM IN OUTPUT HOPPER 3 ................................................................................................................................................... 91

FIGURE 134 CARD JAM IN OUTPUT HOPPER 4 ................................................................................................................................................... 92

FIGURE 135 CARD JAM IN OUTPUT HOPPER 5 ................................................................................................................................................... 92

FIGURE 136 INPUT HOPPER CLEANING 1 ............................................................................................................................................................. 92

FIGURE 137 INPUT HOPPER CLEANING 2 ............................................................................................................................................................. 93

FIGURE 138 INPUT HOPPER CLEANING 3 ............................................................................................................................................................. 93

FIGURE 139 INPUT HOPPER CLEANING 4 ............................................................................................................................................................. 93

FIGURE 140 PRINTER CLEANING 1.........................................................................................................................................................................94

FIGURE 141 PRINTER CLEANING 2.........................................................................................................................................................................94

FIGURE 142 PRINTER CLEANING 3.........................................................................................................................................................................94

FIGURE 143 HYBRID FLIPPER CLEANING 1............................................................................................................................................................ 95

FIGURE 144 HYBRID FLIPPER CLEANING 2............................................................................................................................................................ 95

FIGURE 145 LAMINATOR CLEANING 1...................................................................................................................................................................95

FIGURE 146 LAMINATOR CLEANING 2...................................................................................................................................................................96

FIGURE 147 LAMINATOR CLEANING 3...................................................................................................................................................................96

FIGURE 148 OUTPUT HOPPER CLEANING 1 .........................................................................................................................................................96

FIGURE 149 OUTPUT HOPPER CLEANING 2 .........................................................................................................................................................97

FIGURE 150 OUTPUT HOPPER CLEANING 3 .........................................................................................................................................................97

FIGURE 151 TPH REPLACEMENT 1 ........................................................................................................................................................................97

FIGURE 152 TPH REPLACEMENT 2 ........................................................................................................................................................................98

FIGURE 153 TPH REPLACEMENT 3 ........................................................................................................................................................................98

FIGURE 154 TPH REPLACEMENT 4 ........................................................................................................................................................................98

FIGURE 155 TPH REPLACEMENT 5 ........................................................................................................................................................................99

FIGURE 156 TPH REPLACEMENT 6 ........................................................................................................................................................................99

FIGURE 157 LAMINATOR HEAD REPLACEMENT 1................................................................................................................................................ 99

FIGURE 158 LAMINATOR HEAD REPLACEMENT 2..............................................................................................................................................100

FIGURE 159 LAMINATOR HEAD REPLACEMENT 3..............................................................................................................................................100

FIGURE 160 LAMINATOR HEAD REPLACEMENT 4..............................................................................................................................................100

FIGURE 161 LAMINATOR HEAD REPLACEMENT 5..............................................................................................................................................100

FIGURE 162 LAMINATOR HEAD REPLACEMENT 6..............................................................................................................................................101