Idp SMART-70 Manuel utilisateur

2015.05

SMART-70

User Manual

Users must respect the copyright laws applicable in their country. This manual must not be photocopied,

translated, reproduced or transmitted in whole or in part for any reason and by the means that might be, albeit

electronic or mechanical, without the express, written authorization of IDP Corp., LTD.

All information contained herein may be subject to modification without prior notice. IDP Corp., Ltd. accepts no

liability for any possible errors herein, nor for any accidental damage or damage caused through the

dissemination or the use of this manual.

Trademarks

SMART-70 is a trademark and IDP is a registered trademark of IDP Corp., LTD. Windows is registered trademark

of Microsoft Corp. All other trademarks or registered trademarks are marks of their respective holders. SMART-70

Design is a trademark of IDP Corp., Ltd.

Return Materials Authorization

In order to make a warranty claim you must contact an IDP Reseller. You will be responsible for packaging the

printer for shipment and the costs of shipping and insurance of the printer from the point of use of the printer to

the IDP Reseller. The IDP Reseller will bear the costs of shipping and insuring the printer from the repair location

to the address from which the printer was shipped.

Before returning any equipment for in-warranty or out-of warranty repair, contact an IDP Reseller or an IDP

Service Center for a Return Materials Authorization (RMA) number.

Repack the equipment in the original packing material and mark the RMA number clearly on the outside of the

box. For more information about RMA or IDP warranty statements, refer to the Warranty booklet on the quick

install guide.

Table of Contents

1. Introduction..............................................................................................................................................................................9

1.1 Overview......................................................................................................................................................................................................9

1.2 Modules .................................................................................................................................................................................................... 11

1.2.1 Input Hopper.................................................................................................................................................................................. 11

1.2.2 Encoding Station .......................................................................................................................................................................... 13

1.2.3 Printer ................................................................................................................................................................................................ 15

1.2.4 Flipper................................................................................................................................................................................................ 20

1.2.5 Laminator ......................................................................................................................................................................................... 21

1.2.6 Output Hopper.............................................................................................................................................................................. 23

1.2.7 Stacker............................................................................................................................................................................................... 24

2. Installation and Operation ............................................................................................................................................ 25

2.1 Hardware installation.......................................................................................................................................................................... 25

2.2 Software installation............................................................................................................................................................................ 44

3. Driver configuration ......................................................................................................................................................... 51

3.1 Printing preferences............................................................................................................................................................................ 51

3.2 Other settings ........................................................................................................................................................................................ 56

4. SMART-70 Utilities ............................................................................................................................................................ 59

4.1 Printer setting......................................................................................................................................................................................... 59

4.2 Printer test ............................................................................................................................................................................................... 67

4.3 Firmware upgrade................................................................................................................................................................................ 71

5. Troubleshooting.................................................................................................................................................................. 74

5.1 Printing quality ...................................................................................................................................................................................... 74

5.2 Card supply ............................................................................................................................................................................................. 75

5.3 Card jam ................................................................................................................................................................................................... 76

5.4 Cleaning.................................................................................................................................................................................................... 84

5.5 TPH replacement .................................................................................................................................................................................. 89

5.6 Laminator Head replacement ......................................................................................................................................................... 91

6. SMART-70 Specifications ............................................................................................................................................... 93

6.1 SMART-70 Input Hopper.................................................................................................................................................................. 93

6.2 SMART-70 Encoding Station........................................................................................................................................................... 93

6.3 SMART-70 Printer................................................................................................................................................................................. 94

6.4 SMART-70 Flipper ................................................................................................................................................................................ 95

6.5 SMART-70 Laminator.......................................................................................................................................................................... 95

6.6 SMART-70 Output Hopper .............................................................................................................................................................. 96

Table of Figures

Figure 1 Combination of SMART-70 ..........................................................................................................................................................9

Figure 2 Front side of Input Hopper....................................................................................................................................................... 12

Figure 3 Rear side of Input Hopper ........................................................................................................................................................ 13

Figure 4 Front side of Encoding Station ............................................................................................................................................... 14

Figure 5 Rear side of Encoding Station ................................................................................................................................................. 15

Figure 6 Front side of Printer ..................................................................................................................................................................... 16

Figure 7 Rear side of Printer ....................................................................................................................................................................... 17

Figure 8 Printer control panel .................................................................................................................................................................... 17

Figure 9 Front side of Flipper..................................................................................................................................................................... 20

Figure 10 Rear side of Flipper .................................................................................................................................................................... 20

Figure 11 Front side of Laminator............................................................................................................................................................ 22

Figure 12 Rear side of Laminator ............................................................................................................................................................. 22

Figure 13 Front side of Output Hopper ................................................................................................................................................ 23

Figure 14 Rear side of Output Hopper.................................................................................................................................................. 24

Figure 15 Stacker.............................................................................................................................................................................................. 24

Figure 16 SMART-70 Placement of modules ...................................................................................................................................... 25

Figure 17 Module fastening ........................................................................................................................................................................ 26

Figure 18 Module connection .................................................................................................................................................................... 26

Figure 19 Power connection ....................................................................................................................................................................... 27

Figure 20 Ribbon/film cartridge unlocking .......................................................................................................................................... 27

Figure 21 Pulling out ribbon/film cartridge......................................................................................................................................... 28

Figure 22 Print ribbon/laminating film mounting............................................................................................................................. 28

Figure 23 Print ribbon mounting .............................................................................................................................................................. 29

Figure 24 Laminate film mounting........................................................................................................................................................... 29

Figure 25 Print ribbon/laminating film alignment ............................................................................................................................ 30

Figure 26 Ribbon/film cartridge insertion............................................................................................................................................. 30

Figure 27 Ribbon/Film cartridge locking............................................................................................................................................... 31

Figure 28 Detachment of disposable cleaning roller holder ....................................................................................................... 31

Figure 29 Used disposable cleaning roller removal......................................................................................................................... 32

Figure 30 New disposable cleaning roller mounting ...................................................................................................................... 32

Figure 31 Removal of new disposable cleaning roller protector............................................................................................... 33

Figure 32 Installation of disposable cleaning roller holder.......................................................................................................... 33

Figure 33 Card cartridge release from Input Hopper ..................................................................................................................... 34

Figure 34 Cards thickness adjustment.................................................................................................................................................... 34

Figure 35 Card cartridge open................................................................................................................................................................... 35

Figure 36 Removal of the tape for fixing the weight ..................................................................................................................... 35

Figure 37 Card cartridge’s weight fixing ............................................................................................................................................... 36

Figure 38 Card loading .................................................................................................................................................................................. 36

Figure 39 Putting down the card cartridge’s weight....................................................................................................................... 37

Figure 40 Loading card cartridge into Input Hopper...................................................................................................................... 37

Figure 41 Loading card cartridge into Output Hopper.................................................................................................................. 38

Figure 42 Power on ......................................................................................................................................................................................... 38

Figure 43 Module combination checking ............................................................................................................................................. 39

Figure 44 Existing modules combination.............................................................................................................................................. 39

Figure 45 Adjusted modules combination ........................................................................................................................................... 40

Figure 46 Saved module combination ................................................................................................................................................... 40

Figure 47 Completed module combination......................................................................................................................................... 40

Figure 48 System status checking ............................................................................................................................................................ 41

Figure 49 Printer menu.................................................................................................................................................................................. 41

Figure 50 Printer menu (System Config)............................................................................................................................................... 42

Figure 51 Printer menu (Network Config) ............................................................................................................................................ 42

Figure 52 Printer menu (Printer Config) ................................................................................................................................................ 42

Figure 53 Printer menu (Operation) ........................................................................................................................................................ 43

Figure 54 Printer menu (Print Sample)................................................................................................................................................... 43

Figure 55 Sample Card .................................................................................................................................................................................. 43

Figure 56 Printer driver installation 1 ..................................................................................................................................................... 44

Figure 57 Printer driver installation 2 ..................................................................................................................................................... 44

Figure 58 Printer driver installation 3 ..................................................................................................................................................... 44

Figure 59 Printer driver installation 4 ..................................................................................................................................................... 45

Figure 60 Printer driver installation 5 ..................................................................................................................................................... 45

Figure 61 Printer driver installation 6 ..................................................................................................................................................... 45

Figure 62 Printer driver installation 7 ..................................................................................................................................................... 46

Figure 63 Printer driver installation 8 ..................................................................................................................................................... 46

Figure 64 Printer driver installation 9 ..................................................................................................................................................... 46

Figure 65 Printer driver installation 10................................................................................................................................................... 47

Figure 66 Printer driver installation 11................................................................................................................................................... 47

Figure 67 Printer driver installation 12................................................................................................................................................... 47

Figure 68 Printer driver installation 13................................................................................................................................................... 48

Figure 69 Printer driver installation 14................................................................................................................................................... 48

Figure 70 Application installation 1 ......................................................................................................................................................... 48

Figure 71 Application installation 2 ......................................................................................................................................................... 49

Figure 72 Application installation 3 ......................................................................................................................................................... 49

Figure 73 Application installation 4 ......................................................................................................................................................... 49

Figure 74 Application installation 5 ......................................................................................................................................................... 50

Figure 75 Application installation 6 ......................................................................................................................................................... 50

Figure 76 Printer properties window....................................................................................................................................................... 51

Figure 77 Layout ............................................................................................................................................................................................... 51

Figure 78 Input / Output settings ............................................................................................................................................................ 53

Figure 79 Printing settings........................................................................................................................................................................... 54

Figure 80 Laminating settings .................................................................................................................................................................... 54

Figure 81 Encoding settings........................................................................................................................................................................ 55

Figure 82 Printer sharing settings............................................................................................................................................................. 56

Figure 83 Ports setting................................................................................................................................................................................... 56

Figure 84 Advanced settings....................................................................................................................................................................... 57

Figure 85 Color Management settings................................................................................................................................................... 57

Figure 86 Security settings........................................................................................................................................................................... 58

Figure 87 Printer status check.................................................................................................................................................................... 58

Figure 88 CardPrinter70Setup Log-in ..................................................................................................................................................... 59

Figure 89 CardPrinter70Setup Start ......................................................................................................................................................... 60

Figure 90 Basic Setup of CardPrinter70Setup..................................................................................................................................... 60

Figure 91 Color density ................................................................................................................................................................................. 62

Figure 92 Resin Black density..................................................................................................................................................................... 62

Figure 93 Overlay density............................................................................................................................................................................. 63

Figure 94 Advanced Setup........................................................................................................................................................................... 64

Figure 95 CardPrinter70Test........................................................................................................................................................................ 67

Figure 96 Monitor ............................................................................................................................................................................................ 68

Figure 97 CardPrinter70Firmware ............................................................................................................................................................. 71

Figure 98 Modules of SMART-70 system (Printer, Flipper) .......................................................................................................... 72

Figure 99 Ready for firmware upgrade.................................................................................................................................................. 72

Figure 100 Manual firmware upgrade .................................................................................................................................................... 73

Figure 101 Printing quality trouble 1...................................................................................................................................................... 74

Figure 102 Printing quality trouble 2...................................................................................................................................................... 74

Figure 103 Printing quality trouble 3...................................................................................................................................................... 74

Figure 104 Printing quality trouble 4...................................................................................................................................................... 75

Figure 105 Printing quality trouble 5...................................................................................................................................................... 75

Figure 106 Card supply problem 1 .......................................................................................................................................................... 75

Figure 107 Card jam in Input Hopper 1 ................................................................................................................................................ 76

Figure 108 Card jam in Input Hopper 2................................................................................................................................................ 76

Figure 109 Card jam in Input Hopper 3 ................................................................................................................................................ 76

Figure 110 Card jam in Input Hopper 4 ................................................................................................................................................ 76

Figure 111 Card jam in Input Hopper 5 ................................................................................................................................................ 76

Figure 112 Card jam in Printer 1............................................................................................................................................................... 77

Figure 113 Card jam in Printer 2............................................................................................................................................................... 78

Figure 114 Card jam in Printer 3............................................................................................................................................................... 78

Figure 115 Card jam in Printer 4............................................................................................................................................................... 78

Figure 116 Card jam in Printer 5............................................................................................................................................................... 79

Figure 117 Card jam in Flipper 1 .............................................................................................................................................................. 79

Figure 118 Card jam in Flipper 2 .............................................................................................................................................................. 79

Figure 119 Card jam in Flipper 3 .............................................................................................................................................................. 80

Figure 120 Card jam in Flipper 4 .............................................................................................................................................................. 80

Figure 121 Card jam in Laminator 1 ....................................................................................................................................................... 80

Figure 122 Card jam in Laminator 2 ....................................................................................................................................................... 81

Figure 123 Card jam in Laminator 3 ....................................................................................................................................................... 81

Figure 124 Card jam in Laminator 4 ....................................................................................................................................................... 81

Figure 125 Card jam in Laminator 5 ....................................................................................................................................................... 82

Figure 126 Card jam in Output Hopper 1 ............................................................................................................................................ 82

Figure 127 Card jam in Output Hopper 2 ............................................................................................................................................ 82

Figure 128 Card jam in Output Hopper 3 ............................................................................................................................................ 83

Figure 129 Card jam in Output Hopper 4 ............................................................................................................................................ 83

Figure 130 Card jam in Output Hopper 5 ............................................................................................................................................ 83

Figure 131 Input Hopper cleaning 1 ....................................................................................................................................................... 84

Figure 132 Input Hopper cleaning 2....................................................................................................................................................... 84

Figure 133 Input Hopper cleaning 3....................................................................................................................................................... 84

Figure 134 Input Hopper cleaning 4....................................................................................................................................................... 85

Figure 135 Printer cleaning 1...................................................................................................................................................................... 85

Figure 136 Printer cleaning 2...................................................................................................................................................................... 85

Figure 137 Printer cleaning 3...................................................................................................................................................................... 86

Figure 138 Flipper cleaning 1 ..................................................................................................................................................................... 86

Figure 139 Flipper cleaning 2 ..................................................................................................................................................................... 86

Figure 140 Laminator cleaning 1 .............................................................................................................................................................. 87

Figure 141 Laminator cleaning 2 .............................................................................................................................................................. 87

Figure 142 Laminator cleaning 3 .............................................................................................................................................................. 87

Figure 143 Output Hopper cleaning 1................................................................................................................................................... 88

Figure 144 Output Hopper cleaning 2................................................................................................................................................... 88

Figure 145 Output Hopper cleaning 3................................................................................................................................................... 88

Figure 146 TPH replacement 1 .................................................................................................................................................................. 89

Figure 147 TPH replacement 2 .................................................................................................................................................................. 89

Figure 148 TPH replacement 3 .................................................................................................................................................................. 89

Figure 149 TPH replacement 4 .................................................................................................................................................................. 90

Figure 150 TPH replacement 5 .................................................................................................................................................................. 90

Figure 151 TPH replacement 6 .................................................................................................................................................................. 90

Figure 152 Laminator Head replacement 1 ......................................................................................................................................... 91

Figure 153 Laminator Head replacement 2 ......................................................................................................................................... 91

Figure 154 Laminator Head replacement 3 ......................................................................................................................................... 91

Figure 155 Laminator Head replacement 4 ......................................................................................................................................... 92

Figure 156 Laminator Head replacement 5 ......................................................................................................................................... 92

Figure 157 Laminator Head replacement 6 ......................................................................................................................................... 92

1. Introduction

1.1 Overview

SMART-70 is a high-performance large capacity ID card printer designed by the unique modular

concept that can support various printer configurations to meet different user requirements. 500

cards can continuously be printed, laminated and encoded on various card. SMART-70 consists of

6 different modules (①Input Hopper, ②Encoding station, ③Printer, ④Flipper, ⑤Laminator, ⑥

Output Hopper) that can be configured in various combinations according to different customer

requirements. Required modules can easily be added to extend functions depending on your

needs.

Figure 1 Combination of SMART-70

Key features of SMART-70 are as follows.

Convenience

SMART-70 is sleekly designed, such as modern household appliances, to provide user-

friendly environment with the maximum convenience. Status LED on all modules can

indicate the status of each module at all times. Also, LCD and buttons on Printer and

Laminator are for user to check the status and set the configuration. Card, print ribbon

and other consumables can be changed in intuitive way, and all modules are equipped

①

②

③

⑥

⑤

④

with physical locks to provide high security feature.

Clear printing

SMART-70 can print clear images on card by using IDP’s FINE Technology that can

exquisitely control the heat of print head depending on the picture.

High Speed

SMART-70 can print 200 cards/hour for color (YMCKO) and 1,000 cards/hour for

monochrome. Since each module can independently work, multiple cards can be

simultaneously printed, encoded and laminated by the pipeline processing for

enhancing issuance speed.

High Capacity

SMART-70 is designed to support 500 cards capacity in Input Hopper, Printer,

Laminator and Output Hopper. Once card, print ribbon and laminating film are replaced,

500 cards can be continuously issued. Also, cards can be loaded and stacked the up to

3000 cards by using multiple Input / Output Hopper.

Encoding

SMART-70 can encode magnetic stripe and smart cards by using Encoding Station or

the encoding options installed into Printer module. In case of using Encoding station,

magnetic stripe card, contact and contactless smart card can be encoded and 1D & 2D

barcode on card can be scanned. Also, magnetic stripe and contactless smart card

encoder can be installed in Printer module.

Energy Saving

In order to save energy, SMART-70 is designed to minimize unnecessary power

consumption when the system doesn’t work. Since SMART-70 Laminator uses the

instant direct heating mechanism developed by IDP, it requires no warming-up for

laminating and no additional power consumption for maintaining the temperature of

the laminate head while on standby.

Reliability

Since the metal frame, stainless steel shaft and ball bearing is used for the high

durability, SMART-70 can be stably operated under the harsh environments of the

massive issuance environment.

Autres manuels pour SMART-70

Table des matières

Autres manuels idp Imprimante

idp

idp SMART-70 Manuel utilisateur

idp

idp SMART-21S Manuel utilisateur

idp

idp Solid 510 Guide de configuration

idp

idp SMART Series Manuel utilisateur

idp

idp SMART Series Manuel utilisateur

idp

idp SOLID Series Manuel utilisateur

idp

idp Smart Series Manuel utilisateur

idp

idp SMART-31R Manuel utilisateur

idp

idp SMART-81 Manuel utilisateur

idp

idp Smart Series Manuel utilisateur

idp

idp SMART-81 Manuel utilisateur

idp

idp SMART-30S Manuel utilisateur

idp

idp Smart-30 Manuel utilisateur

idp

idp SOLID-510S Manuel utilisateur

idp

idp SMART-50 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur