IDevices Kitchen Thermometer mini Manuel utilisateur

User Manual

Table of Contents

In the Box 3

Quick Start Instructions 3

Getting Started 4

iDevices Connected app 4

Battery Replacement 5

Powering On & Off 5

Connecting 6

Mounting 6

Probe Use 7

Probe Wrap Use 8

Using the Kitchen Thermometermini 9

Smart LED 9

Proximity Sensor 10

Custom & Preset Alarms 10

Renaming Probes 12

Timer Tool 12

Globe Tool 12

Graph Tool 12

Problem Solving 13

Frequently Asked Questions: 16

Disclaimer 18

Regulations 18

In the Box

Inside your Kitchen Thermometermini box, you will nd:

• 1 Kitchen Thermometermini

• 1 Coin Cell Battery (Installed)

• 1 Meat Probe

• 1 Probe Wrap

• 1 Colored Probe Indicator

• 1 Optional Magnetic Disc

• Quick Start Guide

Quick Start Instructions

1. Download the iDevices®Connected app from the App StoreSM or

Google PlayTM store on one of the following compatible devices

• iPhone®(4S and later)

• iPad®(3rd generation and later)

• iPad miniTM (all generations)

• iPod touch®(5th generation and later)

• Many AndroidTM devices equipped with Bluetooth®4.0 and

running Android software version 4.3 or later

2. Enable Bluetooth on your smart device under ‘Settings’.

3. Separate the Kitchen Thermometermini from its base by rmly

holding the base with one hand and gently pulling the Kitchen

Thermometermini top upwards with the other hand.

4. On the underside of the Kitchen Thermometermini, remove the

battery door by twisting it counter-clockwise. Remove the battery

pull tab. Ensure the battery is in place and replace the battery door.

5. Clip the Kitchen Thermometermini top back into its base.

6. Plug the Meat Probe into the probe port of the Kitchen

Thermometermini.

7. Press the power button located at the center of the faceplate

for two seconds. The display will light up, indicating the Kitchen

Thermometermini has powered on.

8. Open the iDevices Connected app to connect to your Kitchen

Thermometermini. Tap on the iDevices logo in the gray toolbar at the

top of the app. Select your Kitchen Thermometermini from the device

manager.

9. You are ready to use your Kitchen Thermometermini!

Getting Started

iDevices Connected app

The iDevices Connected app provides all of the functionality and

customization you’ll need to get the most out of your Kitchen

Thermometermini. The iDevices Connected app is compatible with the

following devices:

• iPhone (4S and later)

• iPad (3rd generation and later)

• iPad mini (all generations)

• iPod touch (5th generation and later)

• Many Android devices equipped with Bluetooth 4.0 and running

Android software version 4.3 or later

You must be running iOS 7+ or Android version 4.3+ on your device to

use the iDevices Connected app. Please visit the App Store or Google

Play store and search “iDevices Connected” to download the free iDevices

Connected app.

Once you’ve downloaded the app, you’ll have access to links

for instructional videos, step-by-step instructions and FAQ’s for

troubleshooting.

Battery Replacement

To replace your Kitchen Thermometermini battery, follow these steps:

• Separate the Kitchen Thermometermini from its base by rmly

holding the base with one hand and gently pull the Kitchen

Thermometermini top upwards with the other hand.

• On the underside of the Kitchen Thermometermini, remove the

battery door by twisting it counter-clockwise

• Replace the battery with a CR2032 coin cell battery (available at

local drugstores in the specialty battery section).

• Ensure the battery is in place and replace the battery door.

Powering On & Off

To turn on the Kitchen Thermometermini, follow these steps:

• Press the power button located at the center of the faceplate.

• The Smart LED will blink blue while waiting for pairing.

To turn off the Kitchen Thermometermini, follow these steps:

• Press and hold down the power button located in the center of the

faceplate for three seconds.

• The Smart LED will illuminate solid white and will then turn off.

Auto Shut-Off:

• The Kitchen Thermometermini will stay powered on for ve minutes

before automatically turning off if there is no probe installed and it is

not paired to a smart device.

• The Kitchen Thermometermini will stay powered on for eight hours

before automatically turning off if not paired to a smart device and

the probe is installed.

• The Kitchen Thermometermini will stay powered on until the battery

is depleted if it is paired with a smart device, even if there is no

probe installed.

Connecting

To connect your Kitchen Thermometermini to your iPhone, iPad, iPod touch

or Android device follow these steps:

• Open Settings

• Tap Bluetooth

• Set Bluetooth to On

• While turned on, place your Kitchen Thermometermini next to your

smart device and open the iDevices Connected app. Your smart

device will automatically recognize any available iDevices products

and display them in the device manager. You can view your device

manager by tapping the iDevices logo at the top of the app.

• Select your Kitchen Thermometermini from the device manager. You

will then be sent a pairing request. Once you accept, your smart

device will pair with the Kitchen Thermometermini and you are ready

to congure your settings and start cooking!

To connect an additional Kitchen Thermometermini (or other iDevices

product) to your iPhone, iPad, iPod touch or Android device follow these

steps:

• While turned on, place your Kitchen Thermometermini (or other

iDevices product) next to your smart device and open the iDevices

Connected app.

• Tap on the gray bar located at the top of the screen to expose the

device manager. Select the product you would like to pair with

from the device manager. Your smart device will display a pairing

request. Once accepted, your smart device will pair with the

additional product and you are ready to congure your settings and

start cooking!

Mounting

• The Kitchen Thermometermini’s base is magnetic for convenient

positioning on a cool portion of your oven, stove or other magnetic

surfaces.

• The Kitchen Thermometermini can be taken out of its base, rotated

180° and set back into its base for two different viewing angles.

• The Kitchen Thermometermini comes with an optional magnetic

disc with an adhesive on one side. This allows the Kitchen

Thermometermini to magnetically mount on a non-magnetic surface.

The magnetic disc has a protective cover on its face to protect it

from being scratched.

To mount your magnetic disc, please follow these steps below:

• Clean the surface thoroughly where the magnetic disc will be

adhered to ensure proper bonding.

• Remove the protective lm covering the adhesive on the magnetic

disc.

• Adhere the magnetic disc to your desired surface.

• Let the magnetic disc bond to the surface at least 6-12 hours before

mounting your Kitchen Thermometermini to the disc.

• Place your Kitchen Thermometermini on the magnetic disc.

The magnetic base is not designed to withstand high heat

and it must be placed on a cool surface. If the surface is too

hot to touch, it is too hot for the Kitchen Thermometermini

base!

Probe Use

• Meat Probe Acceptable Temperature Range: -22°F to 572°F (-30ºC

to 300ºC)

• Pro Meat Probe and Pro Ambient Temperature Probe Acceptable

Temperature Range (sold on iDevicesinc.com): -22ºF to 620ºF (-30ºC

to 326ºC)

• The Meat Probe should always be inserted into the center of the

item being cooked for an accurate temperature reading.

• When using a standard Meat Probe, be sure to route the probe wire

where it will not be exposed to ames or temperatures exceeding

572° (300°C).

• The Pro Ambient Probe should be clipped between two grates

inside the oven. Ensure that the tip of the probe does not touch the

grates.

• The probe wrap allows for convenient storage of your probe

and is magnetic so that it can be stored under your Kitchen

Thermometermini when not in use.

The colored probe indicator is for visual identication of the

probe within the app and cosmetic purposes only. It is not

designed for heat safety.

The probe should be cleaned by hand with a dishcloth,

standard dishwashing soap and warm water. The probe is

not dishwasher safe. Take precaution not to get the probe’s

wiring wet.

Be sure to avoid water exposure to the probes’ wiring as

well as the area where the probes’ wiring meets the probe.

The probe is not waterproof and damage may result from

water exposure. The probe should never be submersed in

water.

Temperatures below -22°F or above 572°F (-30ºC or above

300ºC) will not display in the iDevices Connected app and

will cause the probe to disappear from connection.

Probe Wrap Use

To wrap your probe:

• Hold the probe wrap so that the clip segment is on the bottom left

and the iDevices logo is legible in the center of the probe wrap.

• Snap the probe into the probe wrap’s clip, ensuring that the probe’s

body follows the contour of the probe wrap and leaves a ½ inch gap

between the probe and the wire channel of the probe wrap. The tip

of the probe should be pointed downward.

• Wrap your probe’s wire clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap’s wire channel to secure the wrapping.

Using the Kitchen

Thermometermini

Smart LED

The Smart LED allows the Kitchen Thermometermini to display the

connected probe temperature reading through the use of color. Below is a

list of all of the light combinations you will see on the Smart LED and their

associated meanings:

Connection

• Solid White: Powering off or reset complete

• Solid Blue: Conrms pairing of new device

• Blinking Blue: Awaiting pairing or no alarm set

Peak Preset

• Solid Green: Initial Temperature

• Solid Yellow: Target Temperature is 15° F away

• Solid Orange: Target Temperature is 5° F away

• Blinking Red: Target temperature reached

• Solid Red: Target temperature reached and alarm acknowledged

Range Preset

• Solid Green: Temperature inside range

• Blinking Red: Temperature outside range

Proximity Sensor

The use of Bluetooth Smart allows the Kitchen Thermometermini to sense

when a paired smart device moves in or out of range. The Kitchen

Thermometermini will automatically wake and sleep at the below distances

to conserve power:

• Sleep ~ 30 feet away

• Wake ~ 5 feet away

*Proximity function based on Bluetooth signal strength. Signal strength

is inuenced by a number of factors including the smart device

and environment.

Custom & Preset Alarms

Manage iPhone, iPad or iPod touch alarms:

If you are having issues hearing the alarms from the iDevices Connected

app, try these steps:

• Open Settings on your smart device

• Tap “Notication Center”

• Choose the iDevices Connected app and make sure to enable

notications, including “Sounds” and “Alerts”

Manage Android device alarms:

• Open Settings on your device

• Find “Apps” and search for the iDevices Connected app (This could

be located in your “Application Manager”)

• Make sure notications are enabled

Make sure the volume setting for your phone is properly set.

If your sounds are off or set at a low setting, you may not

hear the alarm properly.

Table des matières

Autres manuels iDevices Thermomètre

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices iGrill Pro Manuel utilisateur

iDevices

iDevices IGRILL MINI Manuel utilisateur

iDevices

iDevices IGRILL MINI Manuel utilisateur

iDevices

iDevices iGrill 2 Manuel utilisateur

iDevices

iDevices iGrill Manuel utilisateur

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices iGrill Manuel utilisateur

iDevices

iDevices IGRILL MINI Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur

iDevices Kitchen Thermometer mini Manuel utilisateur

Manuels Thermomètre populaires d'autres marques