iDevices iGrill 2 Manuel utilisateur
User Manual
2
Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
iDevices Connected App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Mounting 6
Probe Use 7
Probe Wrap Use 8
Using the iGrill2 9
Display 9
Probe Toggle Buttons 9
Proximity Sensor 10
Custom & Preset Alarms 10
Renaming Probes 12
Timer Tool 12
Globe Tool 13
Graph Tool 13
Problem Solving 13
Disclaimer 17
Regulations 17
3
In the Box
Inside your iGrill2 box, you will nd:
• 1 iGrill2
• 2 AA Batteries
• 2 Pro Meat Probes
• 2 Probe Wraps
• 2 Colored Probe Indicators
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the iDevices®Connected app from the App StoreSM or
Google PlayTM Store on one of the following compatible devices:
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad miniTM (all generations)
• iPod touch®(5th generation and later)
• Many AndroidTM devices equipped with Bluetooth®4.0 and
running Android software version 4.3 or later
2. Enable Bluetooth on your smart device under ‘Settings’.
3. Separate the iGrill2 from its base by rmly holding the base with one
hand and gently pulling the iGrill2top upwards with the other hand.
4. On the underside of the iGrill2, depress and remove the battery
door. Insert the two supplied AA batteries with their negative
terminals compressing the springs and replace the battery door.
5. Clip the iGrill2top back into its base.
4
6. Plug one or more probes into the probe ports of the iGrill2.
7. Press the power button located at the bottom of the faceplate
between the < and > buttons for two seconds. The display will
animate and a single beep will sound, indicating that the iGrill2has
powered on.
8. Open the iDevices Connected app to connect to your iGrill2. Tap on
the iDevices logo in the gray toolbar at the top of the app. Select
your iGrill2from the device manager.
9. You are ready to use your iGrill2!
Getting Started
iDevices Connected App
The iDevices Connected app provides all of the functionality and
customization you’ll need to get the most out of your iGrill2. The iDevices
Connected app is compatible with the following devices:
• iPhone (4S and later)
• iPad (3rd generation and later)
• iPad mini (all generations)
• iPod touch (5th generation and later)
• Many Android devices equipped with Bluetooth 4.0 and running
Android software version 4.3 or later
You must be running iOS 7+ or Android version 4.3+ on your device to use
the iDevices Connected app. Please visit the App Store or Google Play
Store and search “iDevices Connected” to download the free iDevices
Connected app.
Once you’ve downloaded the app, you’ll have access to links
for instructional videos, step-by-step instructions and FAQ’s for
troubleshooting.
5
Battery Replacement
To replace your iGrill2 batteries, follow these steps:
• Separate the iGrill2 from its base by rmly holding the base with one
hand and gently pull the iGrill2top upwards with the other hand.
• On the underside of the iGrill2, depress and remove the battery
door.
• Replace the two AA batteries with their negative terminals
compressing the springs and replace the battery door.
Battery Precautions:
• Do not mix new and old batteries
• Do not mix alkaline, standard (carbon zinc) or rechargeable (ni-cad,
ni-mh, etc.) batteries.
• Dispose of spent or damaged batteries according to manufacturer
instructions and local laws.
Powering On & Off
To turn on the iGrill2, follow these steps:
• Press the power button located at the bottom of the faceplate
between the < and > buttons.
• The display will animate, and a single beep will be heard, indicating
it has powered on.
To turn off the iGrill2, follow these steps:
• Press and hold down the power button located at the bottom of
the faceplate between the < and > buttons for three seconds. The
display will show “OFF”.
• Upon releasing the power button, the iGrill2will turn off.
Auto Shut-Off:
• The iGrill2 will stay powered on for ve minutes before automatically
turning off if there are no probes installed and it is not paired to a
smart device.
6
• The iGrill2will stay powered on for eight hours before automatically
turning off if not paired to a smart device and probes are installed.
• The iGrill2 will stay powered on indenitely if at least one probe is
installed and it is paired with a smart device.
Connecting
To connect your iGrill2to your iPhone, iPad, iPod touch or Android device
follow these steps:
• Open Settings
• Tap Bluetooth
• Set Bluetooth to On
• While turned on, place your iGrill2next to your smart device
and open the iDevices Connected app. Your smart device will
automatically recognize any available iDevices products and display
them in the device manager. You can view your device manager by
tapping the iDevices logo at the top of the app.
• Select your iGrill2from the device manager. You will then be sent a
pairing request. Once you accept, your smart device will pair with
the iGrill2 and you are ready to congure your settings and start
cooking!
To connect an additional iGrill2(or other iDevices product) to your iPhone,
iPad, iPod touch or Android device follow these steps:
• While turned on, place your iGrill2(or other iDevices product) next
to your smart device and open the iDevices Connected app.
• Tap on the gray bar located at the top of the screen to expose the
device manager. Select the product you would like to pair with
from the device manager. Your smart device will display a pairing
request. Once accepted, your smart device will pair with the
additional product and you are ready to congure your settings and
start cooking!
Mounting
• The iGrill2‘s base is magnetic for convenient positioning on a cool
portion of your grill, smoker or other magnetic surfaces.
7
• The iGrill2can be taken out of its base, rotated 180° and set back
into its base for two different viewing angles.
• The iGrill2comes with an optional magnetic disc with an adhesive
on one side. This allows the iGrill2to magnetically mount to a non-
magnetic surface. The magnetic disc has a protective cover on its
face to protect it from being scratched.
To mount your magnetic disc, please follow the below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the lm covering the adhesive on the magnetic disc.
• Adhere the magnetic disc to your desired surface.
• Let the magnetic disc bond to the surface for 6-12 hours before
mounting your iGrill2to the disc.
• Place your iGrill2on the magnetic disc.
The magnetic base is not designed to withstand high heat
and it must be placed on a cool surface. If the surface is too
hot to touch, it’s too hot for the iGrill2base!
Probe Use
• Pro Meat Probe and Pro Ambient Probe Acceptable Temperature
Range: -22°F to 620°F (-30ºC to 326ºC)
• Meat Probe Acceptable Temperature Range: -22ºF to 572ºF (-30ºC
to 300ºC).
• The Meat Probes should always be inserted into the center of the
item being cooked for an accurate temperature reading.
• When using a standard Meat Probe, be sure to route the probe wire
where it will not be exposed to ames or temperatures exceeding
8
572° (300ºC). Pro Meat Probes may be exposed to temperatures as
high as 620ºF (326ºC).
• The Pro Ambient Probe should be clipped between two grates
inside your grill, smoker or oven. Ensure the tip of the probe does
not touch the grates.
• The probe wraps allow for convenient storage of your probes and
are magnetic so that they can be stored under your iGrill2when not
in use.
The colored probe indicators are for visual identication of
the probe(s) within the app and cosmetic purposes only.
They are not designed for heat safety.
The probes should be cleaned by hand with a dishcloth,
standard dishwashing soap and warm water. The probes are
not dishwasher safe. Take precaution not to get the probe’s
wiring wet.
Be sure to avoid water exposure to the probes’ wiring as
well as the area where the probes’ wiring meets the probes.
The probes are not waterproof and damage may result from
water exposure. The probes should never be submersed in
water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.
Probe Wrap Use
To wrap your probe(s):
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
9
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill2
Display
The iGrill2’s display contains the following:
Display
• Displays temperature of currently active probe.
• Displays “DC” for temperatures below -22°F (-30ºC).
• Displays “DH” for temperatures above 572°F (300ºC).
• Displays “OFF” during power off sequence.
• Animates during power on sequence and during reset.
Bluetooth LED
• Blinks blue when discoverable and awaiting pairing.
• Illuminates solid blue when paired.
Probe Indicator LEDs
• Far left side LED illuminates to indicate Probe 1 temperature being
displayed.
• Middle left side LED illuminates to indicate Probe 2 temperature
being displayed.
• Middle right side LED illuminates to indicate Probe 3 temperature
being displayed.
• Far right side LED illuminates to indicate Probe 4 temperature being
displayed.
Probe Toggle Buttons
10
The iGrill2has two buttons adjacent to the power button to toggle
between probes when there is more than one probe connected.
• Pressing the < or > button will switch from the currently displayed
probe temperature (as indicated by the illuminated probe indicator
LED) to the next probe.
• Holding either the < or > button down for one second will activate
a cycle that will continuously cycle through displaying each probe’s
temperature.
• Pressing the <, >, or power button while the alternating display
cycle is activated will disable the display cycle.
Proximity Sensor
The use of Bluetooth Smart allows the iGrill2to sense when a paired smart
device moves in or out of range. The iGrill2will automatically wake and
sleep at the below distances to conserve power:
• Sleep ~ 30 feet away
• Wake ~ 5 feet away
*Proximity function based on Bluetooth signal strength. Signal strength
is inuenced by a number of factors including the smart device
and environment.
Custom & Preset Alarms
Manage iPhone, iPad or iPod touch alarms:
If you are having issues hearing the alarms from the iDevices Connected
app, try these steps:
• Open Settings on your smart device
• Tap “Notication Center”
• Choose the iDevices Connected app and make sure to enable
notications, including “Sounds” and “Alerts”
Table des matières
Autres manuels iDevices Thermomètre
iDevices
iDevices iGrill Manuel utilisateur
iDevices
iDevices Kitchen thermometer Manuel utilisateur
iDevices
iDevices Kitchen Thermometer mini Manuel utilisateur
iDevices
iDevices IGRILL MINI Manuel utilisateur
iDevices
iDevices iGrill Pro Manuel utilisateur
iDevices
iDevices Kitchen thermometer Manuel utilisateur
iDevices
iDevices iGrill Manuel utilisateur
iDevices
iDevices IGRILL MINI Manuel utilisateur
iDevices
iDevices Kitchen thermometer Manuel utilisateur
iDevices
iDevices IGRILL MINI Manuel utilisateur
