IDevices IGRILL MINI Manuel utilisateur

User Manual

Table of Contents

In the Box 3

Quick Start Instructions 3

Getting Started 4

iDevices Connected App 4

Battery Replacement 5

Powering On & Off 5

Connecting 6

Disconnecting 6

Mounting 7

Probe Use 8

Probe Wrap Use 9

Using the iGrillmini 9

Smart LED 9

Proximity Sensor 10

Custom & Preset Alarms 10

Setting Up A Cook 11

Renaming Probes 12

Timer Tool 12

Globe Tool 13

Graph Tool 13

Problem Solving 13

Disclaimer 17

Regulations 17

In the Box

Inside your iGrillmini box, you will nd:

• 1 iGrillmini

• 1 Coin Cell Battery (Installed)

• 1 Meat Probe

• 1 Colored Probe Indicator (Red)

• 1 Probe Wrap

• 1 Optional Magnetic Disc

• Quick Start Guide

Quick Start Instructions

1. Download the iDevices®Connected app from the App StoreSM or

Google PlayTM store on one of the following compatible devices:

• iPhone®(4S and later).

• iPad®(3rd generation and later).

• iPad miniTM (all generations).

• iPod touch®(5th generation and later).

• Many AndroidTM devices equipped with Bluetooth®4.0 and

running Android software version 4.3 or later.

2. Enable Bluetooth on your smart device under ‘Settings’.

3. Separate the iGrillmini from its base by rmly holding the base with

one hand and gently pulling the iGrillmini top upwards with the other

hand.

4. On the underside of the iGrillmini, remove the battery door by

twisting it counter-clockwise. Remove the battery pull tab. Ensure

the battery is in place and replace the battery door.

5. Clip the iGrillmini top back into its base.

6. Plug the Meat Probe into the probe port of the iGrillmini.

7. Press the power button located at the center of the faceplate for

two seconds. The display will light up, indicating the iGrillmini has

powered on.

8. Open the iDevices Connected app to connect to your iGrillmini. Tap

on the iDevices logo in the gray toolbar at the top of the app. Select

your iGrillmini from the device manager.

9. You are ready to use your iGrillmini!

Getting Started

iDevices Connected App

The iDevices Connected app provides all of the functionality and

customization you’ll need to get the most out of your iGrillmini. The iDevices

Connected app is compatible with the following devices:

• iPhone (4S and later).

• iPad (3rd generation and later).

• iPad mini (all generations).

• iPod touch (5th generation and later).

• Many Android devices equipped with Bluetooth 4.0 and running

Android software version 4.3 or later.

You must be running iOS 7+ or Android version 4.3+ on your device to use

the iDevices Connected app. Please visit the App StoreSM or Google PlayTM

store and search “iDevices Connected” to download the free iDevices

Connected app.

Once you’ve downloaded the app, you’ll have access to links

for instructional videos, step-by-step instructions and FAQ’s for

troubleshooting.

Battery Replacement

To replace your iGrillmini battery, follow these steps:

• Separate the iGrillmini from its base by rmly holding the base with

one hand and gently pull the iGrillmini top upwards with the other

hand.

• On the underside of the iGrillmini, remove the battery door by

twisting it counter-clockwise.

• Replace the battery with a CR2032 coin cell battery (available at

local drugstores in the specialty battery section).

• Ensure the battery is in place and replace the battery door.

Powering On & Off

To turn on the iGrillmini, follow these steps:

• Press the power button located at the center of the faceplate.

• The Smart LED will blink blue while waiting for pairing.

To turn off the iGrillmini, follow these steps:

• Press and hold down the power button located in the center of the

faceplate for two seconds.

• The Smart LED will illuminate solid white and will then turn off.

Auto Shut-Off:

• The iGrillmini will stay powered on for ve minutes before

automatically turning off if there is no probe installed and it is not

paired to a smart device.

• The iGrillmini will stay powered on for eight hours before

automatically turning off if not paired to a smart device and the

probe is installed.

• The iGrillmini will stay powered on until the battery is depleted if it is

paired with a smart device, even if there is no probe installed.

Connecting

To connect your iGrillmini to your iPhone, iPad, iPod touch or Android device

follow these steps:

• Open Settings.

• Tap Bluetooth.

• Set Bluetooth to On.

• While turned on, place your iGrillmini next to your smart device

and open the iDevices Connected app. Your smart device will

automatically recognize any available iDevices products and display

them in the device manager. You can view your device manager by

tapping the iDevices logo at the top of the app.

• Select your iGrillmini from the device manager. You will then be sent

a pairing request. Once you accept, your smart device will pair with

the iGrillmini and you are ready to congure your settings and start

cooking!

To connect an additional iGrillmini (or other iDevices product) to your

iPhone, iPad, iPod touch or Android device follow these steps:

• While turned on, place your iGrillmini (or other iDevices product) next

to your smart device and open the iDevices Connected app.

• Tap on the gray bar located at the top of the screen to expose the

device manager. Select the product you would like to pair with from

the device manager. Your smart device will display a pairing request.

Once accepted, your smart device will pair with the additional

product and you are ready to congure your settings and start

cooking!

Disconnecting

To disconnect your iGrillmini device (or other iDevices product) to your

iPhone, iPad, iPod Touch or Android device, follow these steps:

• While turned on, place your iGrillmini next to your smart device

and open the iDevices Connected app. Your smart device will

automatically recognize any available and previously connected

iDevices products. You can display them in the device manager by

tapping the 3 dots at the top right hand of the screen.

• If your iGrillmini is connected, it will be listed under “Connected

Devices”.

• You can swipe to the left on the product name (i.e. iGrillmini) to

expose the “Disconnect” option.

• Tap “Disconnect”.

Mounting

• The base of the iGrillmini is magnetic for convenient positioning on a

cool portion of your grill, smoker or other magnetic surfaces.

• The iGrillmini can be taken out of its base, rotated 180° and set back

into its base for two different viewing angles.

• The iGrillmini comes with an optional magnetic disc with an adhesive

on one side. This allows the iGrillmini to magnetically mount on a

non-magnetic surface. The magnetic disc has a protective cover on

its face to protect it from being scratched.

To mount your magnetic disc, please follow the below steps:

• Clean the surface thoroughly where the magnetic disc will be

adhered to ensure proper bonding.

• Remove the protective lm covering the adhesive on the

magnetic disc.

• Adhere the magnetic disc to your desired surface.

• Let the magnetic disc bond to the surface for at least 6-12 hours

before mounting your iGrillmini to the disc.

• Place your iGrillmini on the magnetic disc.

The magnetic base is not designed to withstand high heat

and it must be placed on a cool surface. If the surface is too

hot to touch, it is too hot for the iGrillmini base!

Probe Use

• Meat Probes should always be inserted into the center of the item

being cooked for an accurate temperature reading.

• When using the included Standard Meat Probe, be sure to route the

probe wire where it will not be exposed to ames or temperatures

exceeding 572°F (300°C). Probes should avoid temperatures below

-22°F (-30°C).

• When using Pro-Series Meat Probes (sold separately), be sure

to route the probe wire where it will not be exposed to ames

or temperatures exceeding 620°F (326°C). Probes should avoid

temperatures below -22°F (-30°C).

• The Pro-Series Ambient Probe (sold separately) should be clipped

between two grates inside your grill, smoker or oven. Ensure the tip

of the probe does not touch the grates. Also, be sure to route the

probe wire where it will not be exposed to ames or temperatures

exceeding 620°F (326°C), and avoid temperatures below -22°F

(-30°C).

• The included Probe Wraps allow for convenient storage of your

probes and are magnetic so that they can be stored under your

iGrillmini when not in use.

The colored probe indicator is for visual identication of the

probe within the app and cosmetic purposes only. It is not

designed for heat safety.

The probe should be cleaned by hand with a dishcloth,

standard dishwashing soap and warm water. The probe is

not dishwasher safe. Take precaution not to get the probe’s

wiring wet.

Be sure to avoid water exposure to the probes’ wiring as

well as the area where the probes’ wiring meets the probe.

The probe is not waterproof and damage may result from

water exposure. The probe should never be submersed in

water.

Temperatures below -22°F or above 572°F (-30ºC or above

300ºC) will not display in the iDevices Connected app and

will cause the probe to disappear from connection.

Probe Wrap Use

To wrap your probe:

• Hold the probe wrap so that the clip segment is on the bottom left

and the iDevices logo is legible in the center of the probe wrap.

• Snap the probe into the probe wrap’s clip, ensuring that the probe’s

body follows the contour of the probe wrap and leaves a ½ inch gap

between the probe and the wire channel of the probe wrap. The tip

of the probe should be pointed downward.

• Wrap your probe’s wire clockwise around the probe wrap.

• When you reach the adapter end of the probe wire, it can be

inserted into the probe wrap’s wire channel to secure the wrapping.

Using the iGrillmini

Smart LED

The Smart LED allows the iGrillmini to display the connected probe

temperature reading through the use of color. Below is a list of all of the

light combinations you will see on the Smart LED and their associated

meanings:

Connection

• Solid White: Powering off or reset complete.

• Solid Blue: Conrms pairing of new device.

• Blinking Blue: Awaiting pairing or no alarm set.

Peak Preset

• Solid Green: Initial temperature.

• Solid Yellow: Target temperature is 15° F away.

• Solid Orange: Target temperature is 5° F away.

• Blinking Red: Target temperature reached.

• Solid Red: Target temperature reached and alarm acknowledged.

Range Preset

• Solid Green: Temperature inside range.

• Blinking Red: Temperature outside range.

Proximity Sensor

The use of Bluetooth Smart allows the iGrillmini to sense when a paired

smart device moves in or out of range. The iGrillmini will automatically wake

and sleep at the below distances to conserve power:

• Sleep ~ 30 feet away.

• Wake ~ 5 feet away.

*Proximity function based on Bluetooth signal strength. Signal strength

is inuenced by a number of factors including the smart device

and environment.

Custom & Preset Alarms

Manage iPhone, iPad or iPod touch alarms:

If you are having issues hearing the alarms from the iDevices Connected

app, try these steps.

• Open Settings on your iOS device.

• Tap “Notication Center”.

• Under the “Include” section, locate and tap “iDevices”.

• Enable “Notications” and “Sounds”.

Autres manuels pour IGRILL MINI

Table des matières

Autres manuels iDevices Thermomètre

iDevices

iDevices IGRILL MINI Manuel utilisateur

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices iGrill 2 Manuel utilisateur

iDevices

iDevices iGrill Pro Manuel utilisateur

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices iGrill Manuel utilisateur

iDevices

iDevices IGRILL MINI Manuel utilisateur

iDevices

iDevices Kitchen thermometer Manuel utilisateur

iDevices

iDevices Kitchen Thermometer mini Manuel utilisateur

iDevices

iDevices iGrill Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur