ICRealtime AVSD2218Z Manuel utilisateur

HDAVS IR Motorized Vari-focal Vandal-proof Dome Camera

User’s Manual

Version 1.0.1

Table of Contents

1General Introduction ..................................................................................................................6

1.1 Overview........................................................................................................................6

1.2 Features.........................................................................................................................6

1.3 Functions .......................................................................................................................6

2Framework and Dimensions.....................................................................................................8

3Installation ...................................................................................................................................9

4Menu...........................................................................................................................................12

4.1 HDAVS Series DVR Settings ...................................................................................12

4.2 Note ..............................................................................................................................13

Appendix Toxic or Hazardous Materials or Elements ...............................................................14

Welcome

Thank you for purchasing our HDAVS camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the

Limited power source is rated 12V DC in the IEC60950-1.

We assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

3．Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

If this product is installed in the ceiling, please make sure the installation position can sustain

the min 50N.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series HDAVS camera should be installed in a cool, dry place away from direct sunlight or

strong light, inflammable, explosive substances and etc.

This series camera shall work on the specified working temperature. Please keep it away from

the electromagnetic radiation object and environment.

Please make sure the CMOS component is out of the radiation of the laser beam device.

Otherwise it may result in CMOS optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

6. Accessories

Be sure to use all the accessories recommended by manufacturer.

Before installation, please open the package and check all the components are included.

Contact your local retailer ASAP if something is broken in your package.

7. Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily

maintenance work.

Use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to

clean the device.

Please put the dustproof cap to protect the CMOS component when you do not use the

camera.

Applicable model

This manual can be applied to following model:

AVS-D2218Z

1General Introduction

1.1 Overview

This series megapixel HD camera conforms to the HDAVS standard. It supports video signal

high-speed long distance transmission without any delay. It can be controlled by the DVR

conforming to the HDAVS.

1.2 Features

High-performance CMOS image sensor, megapixel definition.

Default motorized vari-focal lens, adopt auto focus technology, support coaxial cable to

control lens zoom and focus.

Support HD video and control signal coaxial transmission.

Support 75-3 coaxial cable transmission without any loss. 720P series transmission

distance over 500m, 1080P series transmission distance over 300m.

High speed, long distance real-time transmission.

Support HDAVS HD and analog SD switch output.

720P series support 720P@25, 720P@30, 720P@50, 720P@60.

1080P series support 1080P@25, 1080P@30, 720P@25, 720P@30, 720P@50,

720P@60.

Support high performance 3D noise reduction (denoise), excellent performance in low

illumination

Support ICR switch to realize surveillance both in the daytime and at night.

Support OSD (on-screen display), suitable for user self-defined setup.

Support DC12V power supplying.

IP66, IK10 compliance.

Support intelligent IR function, max IR distance 30m.

1.3 Functions

HDAVS Specification

HDAVS（High Definition Composite Video Interface）is an over-coaxial –cable HD video

transmission standard. The technology renders two HD video formats by progressive scanning.

Auto Focus Technology

Detect the location of main screen by the camera auto focus algorithm, and auto adjust focus

motor according to the current focus situation, which would realize zoom control the entire auto

focus. The image stays clear during the process of zooming.

OSD

User-friendly on-screen display for you to select the different functions.

ICR

The IR cut removal is to filter the IR light in the daytime and then auto switch to the general

fitter at night. This function allows the camera to output the high sensitivity and clear video.

Smart IR technology

The sensor controls the IR light on/off via the combination work of the hardware and software,

which realizes the automatically IR light compensation according to the environment

illumination.

3D NR

Comparing with the general 2D denoise function, the 3D denoise function can not only denoise

the brightness of the video separation signal and saturation signal, it can also denoise the

original data from CCD. It greatly enhances noise reduction performance and guarantees clear

and bright video.

2Framework and Dimensions

Please refer to the following figures for dimension information. The unit is mm. See Figure

2-1 to Figure 2-3.

Figure 2-1

Figure 2-2

When the standard definition/high definition switch control cable is short circuit, system outputs

standard definition video. Otherwise, when the circuit is open, system outputs the high

definition video.

Figure 2-3

3Installation

Important

Before the installation, please make sure the installation surface can sustain at

least 3X weight of the bracket and the camera.

The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the

wall. Please refer to Figure 3-1 for installation hole site.

For side exit cable installation, please make sure the side exit cable direction is the same

as shown in the installation position map.

Before you secure the screws on the pedestal, please put the cable through the cable exit

of the pedestal.

Before you complete the installation and debug, do not remove the electrostatic film. After

you remove the film, do not touch the enclosure in case there is any scratch.

Figure 3-1

Table des matières

Autres manuels ICRealtime Caméra de sécurité

ICRealtime

ICRealtime ICR-100X Manuel utilisateur

ICRealtime

ICRealtime F Series Manuel utilisateur

ICRealtime

ICRealtime EL-3000N Manuel utilisateur

ICRealtime

ICRealtime ICIP-B2000 Manuel utilisateur

ICRealtime

ICRealtime ICIPD3000 Manuel utilisateur

ICRealtime

ICRealtime EL-3000 Manuel utilisateur

ICRealtime

ICRealtime EL-470 Manuel utilisateur

ICRealtime

ICRealtime IPEL-M60F-IRW1 Manuel utilisateur

ICRealtime

ICRealtime PTZ-N23X4-S Manuel utilisateur

ICRealtime

ICRealtime HD-PTZ-12X-W Manuel utilisateur

ICRealtime

ICRealtime F Series Manuel utilisateur

ICRealtime

ICRealtime ICIP-P2012C Manuel utilisateur

ICRealtime

ICRealtime ICIP-D2000VIR-B Manuel utilisateur

ICRealtime

ICRealtime Pixim I-Sniper EL-720 Manuel utilisateur

ICRealtime

ICRealtime ICR2200 Manuel utilisateur

ICRealtime

ICRealtime EL8000IR Manuel utilisateur

ICRealtime

ICRealtime IPEL-B2012X-IRW1 Manuel utilisateur

ICRealtime

ICRealtime IPMX Series Manuel utilisateur

ICRealtime

ICRealtime ICIP2040IR Manuel utilisateur

ICRealtime

ICRealtime AVS Series Manuel utilisateur

ICRealtime

ICRealtime AVS-4MD4025-IR Manuel utilisateur

ICRealtime

ICRealtime ELIP-3000N Manuel utilisateur

ICRealtime

ICRealtime EL-790 Manuel utilisateur

ICRealtime

ICRealtime AVS-B2100 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur