ICP DAS USA TSH-734 Manuel utilisateur

Technical support: service@icpdas.com P1

tSH-73x Series Quick Start

v1.0, Feb. 2018

What’s in the box?

Related Information

The package includes the following items:

tSH-73x Series

Module x1

Quick Start x1

(This Document)

CA-002 Cable x1

tSH Series Product Page:

Documentation & Firmware:

NS-205/NS-205PSE Product Page (optional):

Technical support: service@icpdas.com P2

1 Connecting the Power and Host PC

1) Make sure your PC has workable network settings.

Disable or well configure your Windows firewall andAnti-Virus firewall first,

else the “Search Servers” on Chapter 4 may not work. (Please contact

with your system Administrator)

2) Connect both the tSH-73x and your PC to the same sub network or the

same Ethernet switch.

3) Supply power (PoE or +12~+48 VDC)to the tSH-73x.

Technical support: service@icpdas.com P3

2 Installing Software on Your PC

Install eSearch Utility, which can be obtained from the web site:

http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/

Connecting the Master and Slave Devices

Connect the serial port of 2 PC (Master) to COM2/COM3 of the tSH-73x (e.g., tSH-734).

Connect the Modbus device (Slave, e.g., M-7022, optional) to COM1 on the

tSH-73x (e.g., tSH-734)

Supply power (+10 ~+30 V

) to the Modbus device (e.g., M-7022, Device ID: 1)

Note: The wiring and supply power method depends on your Modbus device.



Technical support: service@icpdas.com P4

4 Configuring Network Settings

1) Double click the eSearch Utility shortcut on the desktop.

2) Click the “Search Servers” button to search your tSH-73x.

3) Double click the name of tSH-73x to open the “Configure Server (UDP)”

dialog box.

Factory Default Settings of tSH-73x:

IP Address

192.168.255.1

Subnet Mask

255.255.0.0

Gateway

192.168.0.1

4) Contact your Network Administrator to obtain a correct network

configuration (such as IP/Mask/Gateway). Enter the network settings

and click “OK”. Note: The tSH-73x will use the new settings 2

seconds later.









Technical support: service@icpdas.com P5

5) Wait 2 seconds and click “Search Servers”button again to ensure the

tSH-73x is working well with new configuration.

6) Click the name of tSH-73x to select it.

7) Click the “Web”button to log in to the web configuration pages.

(Or enter the URL address of the tSH-73x in the address bar of the

browser.)

5 Configuring the Application Mode







Technical support: service@icpdas.com P6

1) Enter the password (use

the default password

“admin”) in the Login

password field and click

the “Submit”button.

2) Click the “Application Mode”tab to display the Application Mode

Settings page.

3) Check the “Mode 2: Modbus Sharer”option.

4) Select Port1 (since our M-7022 slave device is connected on this port)

from the “Slave Device Connected on:”option button.

5) Enter the timeout value of the Port1 (e.g. “500”)in the “Slave Timeout

(ms)”field and click the “Submit”button to save your settings.

Use the default

password: admin











Technical support: service@icpdas.com P7

6 Configuring the Serial Port

1) Click the “Port1”tab and select the appropriate Baud Rate and Data

Format settings depending on the M-7022 (Slave) from the relevant drop

down options. (e.g. Baud Rate: 115200 and Data Format: 8, None, 1)

2) Click the “Submit”button to save your settings.

3) Click the “Port2/Port3”tab and select the appropriate Baud Rate and

Data Format settings depending on the serial COM Port of PC (Master

#1/Master #2) from the relevant drop down options. (e.g. Baud Rate:

9600 and Data Format: 8, None, 1)

4) Click the “Submit”button to save your settings.









Technical support: service@icpdas.com P8

7 Self-Test

1) In the eSearch Utility, select

the “Modbus RTU Master”

item from the “Tools”menu to

open the Modbus RTU Master

Utility.

2) In the Modbus RTU Modbus Utility, select your COM port, Baud Rate and Data

Format (e.g. COM1/9600/N,8,1) on the PC (Master) and then click the “Open”

button in the “COM status”section.

3) Refer to “Protocol Description” section and type the command in the

“Command” field then click the “Send command” button. If the response data

is correct, it means the test is success.







Please ensure that the Timeout value in the

window should larger than 2 times the

Slave

timeout setting in the tSH-73x module.

The Modbus command settings

depends on your Modbus device.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ICP DAS USA Unité de contrôle

ICP DAS USA

ICP DAS USA ZT-2026 Manuel utilisateur

ICP DAS USA

ICP DAS USA USB-87P1 Manuel utilisateur

ICP DAS USA

ICP DAS USA MDC-700 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7069 Manuel utilisateur

ICP DAS USA

ICP DAS USA tET Series Manuel utilisateur

ICP DAS USA

ICP DAS USA PROFIBUS PROFI-2510 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD5 Manuel utilisateur

ICP DAS USA

ICP DAS USA tZT-P4C4 Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7016D Manuel utilisateur

ICP DAS USA

ICP DAS USA HRT-711 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7028 Manuel utilisateur

ICP DAS USA

ICP DAS USA WP-5231 Manuel utilisateur

ICP DAS USA

ICP DAS USA PETL-7060 Manuel utilisateur

ICP DAS USA

ICP DAS USA GPS-721-MRTU Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7088 Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-2200 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DL-10 Manuel utilisateur

ICP DAS USA

ICP DAS USA iWSN-110X Series Manuel utilisateur

ICP DAS USA

ICP DAS USA ECAT-2051 Manuel utilisateur

ICP DAS USA

ICP DAS USA ZT-2510 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD8C Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7051 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7033 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7065 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur

ICP DAS USA tSH-734 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques