ICP DAS USA USB-87P1 Manuel utilisateur

p. 1

USB-87P1/2/4/8 Quick Start 1.02

ICP DAS, Co., LTD www.icpdas.com

Package Checklist

Items

Quantity

Model No.

Description

USB-87Pn

USB-87P1

Hardware module:

USB-87Pn I/O Unit

P1: 1 Slot P2: 2 Slots

P4: 4 Slots P8: 8 Slots

USB-87P2

USB-87P4

USB-87P8

Cable

CA-USB18

USB connector cable

Manual

Quick Start Manual (this manual)

Software utility, USB-87Pn User

Manual

Screw

Driver

2.4 mm Screw driver (minus

style)

NOTE: USB-87Pn is only for High Profile I-87K I/O modules,

please DO NOT use Low Profile I/O modules. For more

information, please refer to Chapter 2.2.5 & Appendix B of

“USB-87P1/2/4/8 User Manual”.

Preparation

Power Supply: +10V ~ +30V /DC (Ex: DP-665)

http://www.icpdas.com/products/Accessories/power_supply/power_list.htm

Install USB-87Pn DriverInstaller to PC:

at CD:\NAPDOS\87pn_io_unit\USB-87Pn

or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/USB-87Pn/

Install DCON Utility to PC:

(Version 4.5.2 or above version. Please remove the old version

before install the new version) at CD:\ Napdos\Driver\DCON_Utility

or ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/

Original Writer : Eva Li

Last Editor : Hans , 05/27/2015

All manuals and user guides at all-guides.com

all-guides.com

p. 2

Hardware Configuration

1. View of the USB-87Pn

Slot 0

Power Module

CPU Module

High Profile I-87K I/O Slots

87Pn Power

Power

Connector

Slots LED

indicators

CPU Power

System Ready

Auto Configuration Indicator

Auto Configuring

Dip Switch

Enable/Disable

Slot 1

Slot 2

Slot 3

USB Port

Power & CPU

Module

High Profile I-87K I/O

Slots

Power Connector

Auto Configuring

Dip Switch

Enable/Disable

USB Port

Slots LED Indicators

Power

System Ready

Auto Configuration

Indicator

Slot 0

Slot 1

USB-87P4

USB-87P8 is

like USB-87P4,

but with 8 slots.

USB-87P2

USB-87P1 is

like USB-87P2,

but with 1 slot.

All manuals and user guides at all-guides.com

p. 3

2. Wire the 87Pn to Power and PC

3. Configure CPU Module

Switch

Label

Setting

Description

Dip

Switch

Auto

Config.

Enable

(Switch to ON)

OFF

Disable

USB Connector Cable

(CA-USB18)

PC (COM X)

USB-87P4

Power Supply

+10~+30 VDC

GND

+Vs

GND

To USB port

All manuals and user guides at all-guides.com

p. 4

4. Plug in the High Profile I/O Modules

Example: Plug in I-87019R to Slot 0.

p.s. I-87019R is an AI (Analog Input) High Profile module

I-87019R is auto-configured:

Baud Rate: 115200

Checksum: Disable

Net Address: 2

Note: The Net Address of

USB-87PN is always 1.

After plugged in, the slot indicator is

flashing per 100 ms.

When software configuration is

completed, the LED becomes off.

If configuration is failed, the LED is

always on.

High

Profile

66.7

87.46

102.14

81.08

Low

Profile

Slot: 0 1 2 3





Net Address: 12345

All manuals and user guides at all-guides.com

p. 5

Software Configuration

1. Run DCON Utility to Search the USB-87Pn (Ex: USB-87P8)

Note: Please finish the “Preparation”(See P.1) before Software

Configuration.

The old version of USB-87Pn with old USB chip, it needs to install old

USB driver, and Device Manager will show as below:

Check “Device

Manager”of your

PC to see the

connecting COM.

All manuals and user guides at all-guides.com

p. 6

2. Click “USB-87Pn”to Setup Slots

3. Configure the 87K I/O Module

If the status code is not [01H],

click button and follow

the instruction please.

All manuals and user guides at all-guides.com

all-guides.com

p. 7

4. Click “Write To 87Pn” Button

5. Click “Start Search”Button

Note:

For changing the configuration of 87K I/O module, please repeat from

the STEP 2of the Software Configuration.

“[0,0,0,0...]” of “Status”means “The I/O configuration of each slot is correct”. Each

plugged I/O module will be listed under the USB-87Pn. User can click the name of

I/O module to watch its configuration.

After “Write To 87Pn”, the Status Code

is changed to “[00H] OK”that means

“The configuration is correct”.

All manuals and user guides at all-guides.com

p. 8

Change the Hardware I/O Module

Doesn’t need to configure I/O module again!

Easy! Convenient!

Technical Support

1. USB-87P1/2/4/8 User Manual

CD:\NAPDOS\87Pn_io_unit\USB-87Pn or

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/87pn_io_unit/usb-87pn/

2. DCON Utility User Manual

CD:\ Napdos\Driver\DCON_Utility\Manual or

ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/manual/

3. I-87K high profile series I/O modules selection guide

http://www.icpdas.com/products/PAC/i-8000/8000_IO_modules.htm

4. Our service email account : service@icpdas.com

5. Our website : www.icpdas.com

Remove the

damaged

module.

Plug in a new one with

the same model number.

All manuals and user guides at all-guides.com

Autres manuels pour USB-87P1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ICP DAS USA Unité de contrôle

ICP DAS USA

ICP DAS USA I-8088W Manuel utilisateur

ICP DAS USA

ICP DAS USA EIP-2000 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA tET-P6 Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-7000 series Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7041D Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7188XA Manuel utilisateur

ICP DAS USA

ICP DAS USA I-8213W-4G Manuel utilisateur

ICP DAS USA

ICP DAS USA ZT-2026 Manuel utilisateur

ICP DAS USA

ICP DAS USA ECAT-2012H Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7016D Manuel utilisateur

ICP DAS USA

ICP DAS USA ZT-2510 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA PET-AR400 Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-7083 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7065 Manuel utilisateur

ICP DAS USA

ICP DAS USA EIP-2060 Manuel utilisateur

ICP DAS USA

ICP DAS USA PDS-5000 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DS-2200 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA tDS-700-T Series Manuel utilisateur

ICP DAS USA

ICP DAS USA I-8094 Manuel de la liste des pièces

ICP DAS USA

ICP DAS USA I-8124W Manuel utilisateur

ICP DAS USA

ICP DAS USA tSH-700 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7033 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7016 Manuel utilisateur

ICP DAS USA

ICP DAS USA ZT-2053 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur