IBM N2225 Manuel utilisateur

Quick Installation Guide

N2225 and N2226 SAS/SATA HBAs for IBM System x

N2225

N2226

Thank you for purchasing the

N2225 HBA and/or N2226 HBA.

Please take a few minutes to read

this quick installation guide

before you install the HBAs.

For more information about any

topic covered in this guide, refer

to the N2225and N2226

SAS/SATA HBAs IBM System x

Hardware User’s Guide.

To install the N2225 HBA or the N2226 HBA, follow these steps:

1. Unpack the HBA, and inspect it for damage. Unpack the HBA in a static-free environment.

Touch the static-protective package that contains the HBA to any unpainted surface on the

outside of the server; then, grasp the HBA by the top edge or upper corners, remove it from

the package, and inspect it for damage. Contact your IBM marketing representative or

authorized reseller if the HBA appears to be damaged.

2. Prepare the server. Turn off the server, and remove the power cord from the rear of the

power supply.

3. Remove the cover from the chassis.

4. Check the mounting bracket on the HBA (system-dependent). If required for your

system, replace the full-height mounting bracket that ships on the HBA with the low-profile

bracket supplied. Save and reuse the two screws that attach the long bracket to attach the

short bracket.

ATTENTION: Make a backup of your data before changing your system

configuration to avoid the risk of data loss.

First Edition April 2014

IBM, the IBM logo, ibm.com, and System x are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide.

Printed in USA

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM P/N: 00FH246

5. Insert the HBAs in an available PCIe® slot. Locate an empty x8 PCIe slot. Remove the blank bracket

panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if

applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the

slot. The following figures show how to insert the HBAs into the available PCIe slots.

Insert an N2225 HBA in a PCIe Slot

6. Secure the HBA bracket to the system chassis. Install the bracket screw, if applicable, or engage

the system retention mechanism to secure the HBA to the system chassis.

7. Connect the auxiliary power cable to the HBA only if auxiliary power is required with your

system design. This step is applicable for the N2226 HBA only.

8. Replace the cover of the chassis.

9. Connect SAS cables between the HBA and the SAS enclosure that contains SATA or SAS

devices. The N2225 HBA has two SFF-8644, external x4 mini-SAS HD connectors. The N2226 HBA has

four SFF-8644, external x4 mini-SAS HD connectors. Use a cable with an external mini-SAS HD

connector (SFF-8644) on one end (to connect to the HBA) and the appropriate connector to attach to

the enclosure that contains SAS or SATA devices on the other end.

10. Replace the cover and any power cords, and power up the system. Replace the system cover,

reconnect any power cords, and reconnect any network cables. Turn on the power.

NOTE: The shape, size, and locations of the components on your HBAs and its bracket

might vary from this illustration. The HBA requires a x8 PCIe slot.

B

(GJHRI+RVW%RDUG

%LW6ORWV

92QO\

3&,([SUHVV

[6ORW

%LW6ORW

92QO\

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

TECHNICAL SUPPORT

For assistance installing, configuring, or

using the HBA, go to

http://www.ibm.com/supportportal/

Insert an N2226 HBA in a PCIe Slot

B

(GJHRI+RVW%RDUG

3&,([SUHVV[6ORW

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

Autres manuels pour N2225

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels IBM Matériel informatique

IBM

IBM 4767 Manuel utilisateur

IBM

IBM M791 Series Manuel utilisateur

IBM

IBM MPC603EC Manuel utilisateur

IBM

IBM PCI Cryptographic Coprocessor Mode d’emploi

IBM

IBM 7311-D11 Manuel d'utilisation et d'entretien

IBM

IBM System x Education M5000 Series Manuel utilisateur

IBM

IBM 1620 1 Manuel utilisateur

IBM

IBM 3301690 Manuel utilisateur

IBM

IBM PowerPC 405GP Manuel utilisateur

IBM

IBM ATA 133 Manuel utilisateur

IBM

IBM WebSphere Business Integration Adapter Manuel utilisateur

IBM

IBM Advanced SerialRAID/X Manuel utilisateur

IBM

IBM BladeCenter Management Module Manuel utilisateur

IBM

IBM Power System 9009-41A Manuel utilisateur

IBM

IBM 09N4076 Manuel utilisateur

IBM

IBM 4764 Manuel utilisateur

IBM

IBM Power S1014 Manuel utilisateur

IBM

IBM Power System S914 Mode d’emploi

IBM

IBM WebSphere DataPower XC10 Manuel utilisateur

IBM

IBM 3745 Series Mode d’emploi

IBM

IBM ATA 133 Manuel utilisateur

IBM

IBM PN 10K8798 Manuel utilisateur

IBM

IBM Power Systems 8247-42L Manuel utilisateur

IBM

IBM WebSphere DataPower 7198 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur