Hussmann IMPACT CW2-EGE Manuel utilisateur

NOTE: Be sure merchandisers have

been leveled according to the installa-

tion instructions. Carefully unpack and

inspect the CW2 Joint Kit, making

sure there is no

breakage or damage.

Be sure factory installed alignment pins

are in place.

NOTE: Apply gasketing to one case

only.

1Apply Gaskets – 1 and 2

as shown in Figure 1.

• Remove paper backing as

gasket is applied.

• Apply two rows of Gasket 1 to

the center flue foam area only.

• Lapgasketsatlower

corners.

• Check that there are no gaps

betweengasketandmerchandiser.

• Do not stretch gasket,

especially around corners.

• Do not butt gaskets; always

overlap joints.

CW2-GE/CW2-XGE

CW2U-GE/CW2U-XGE

CW2EGE/CW2EXGE

Joint Kit Instruction

Shop Around Medium Temperature Convertible Merchandisers

January 2001

P/N 419410A

JOINT

JOINT KIT

KIT

PARTS LIST

Item No. Quantity Description

1. 2Gasket 1/2x 1/2x 180 in.

2. 1Donut Gasket

3. 8Nut Retainer 5/16-18

4. 8Cap Screw5/16-18 x 3/4

5. 2Cap Screw 5/16 - 18 x11/4

6. 2Lock Washer Split Steel 5/16

7. 2Flat Washer 5/16

8. 2Hex Nut 5/16 - 18

9. 2Joint Base Plate (end case only)

10. 12 Thread Cutting Flange Screw (end case only)

Splashguard Brackets

MUST BE INSTALLED

BEFORE PIPING CASE.

Figure 1. Installing Gaskets

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

1/2 x1/2In. Gasket

Donut Gasket

ALL

MODELS

CW2U-GE/CW2U-XGE

CW2-GE/

CW2-XGE

CW2-GE/

CW2-XGE

CW2EGE

CW2EXGE

P/N 419410A

Merchandisers

FRONT

CASE

Bumper

Return Air

Grille

Front

Glass

Package

Guard

Channel

Interior

Glass

Panel

Package

Guard

Interior

Glass

Detail B.

Front

Grille

Assembly G

Detail C.

Detail A.

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

2A. Remove shelves (if installed).

B. Remove honeycomb at end

to be joined.

C. Lower light channels. See

Detail A.

D. Remove display racks and

pans.

E. Remove wire rack support.

F. Lift out interior back panel.

G. Remove front grille assembly.

See Details B and C.

Figure 2. Removing Parts

Parent Case

Detail D.

Detail E.

Parent Case

Unitized

Case

End

Case

Follow joining sequence using

appropriate cap screw, retainer,

and hex nut as shown above.

TIGHTEN IN SEQUENCE SHOWN.

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

Figure 3. Installing Retainer Clips, Fasteners and Joining Bolts

P/N 419410A

Shop Around MediumTemperature Convertible

Joint Kit Instruction

Cases should be pushed

tightly together guided by

alignment pins.DO NOT

pull together by bolts.

4Install Nut Retainer – 3 and

3/4in. Cap Screw – 4 at locations

shown in Figure 3.

Do not tighten fully.

BE SURE TO FOLLOW BOLTING

SEQUENCE CORRECTLY.

5Install 11/4in. Cap Screw – 5

LockWasher – 6,

Flat washer – 7 and

Hex Nut – 8.

Start at the bottom locations.

Tighten the joints in the order

shown, Wfirst, then at the center

uprights X, then canopies Y, and

then Z.

See drawing and Details D and E for

installation sequence and locations.

3Move the first two cases to be

joined together and into position

against each other matching

Alignment Pins with the corre-

sponding holes.

CAUTION

END CASE

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

Merchandisers

P/N 419410A

Figure 4. Attaching Joint Plates to End Case

FOR END CASE ONLY:

6Attach Joint Base Plate – 9

to the legs on both sides of the

end case joint using

Screws – 10. See Figure 4

and Detail F.

Joint

Base

Plate

FRONT OF END CASE

Detail F.

9Joint

Base

Plate

FRONT OF CASE

End Case

Leg

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 5

Shop Around MediumTemperature Convertible

Joint Kit Instruction P/N 419410A

7Slide the alignment strips

between front glass sections at

each joint. See Figure 5.

8Refer to the installation instruc-

tions to install the splashguard

brackets.

Figure 5. Inserting the Alignment Strips

Alignment Strip

Autres manuels pour IMPACT CW2-EGE

Ce manuel convient aux modèles suivants

Autres manuels Hussmann marchandiseur

Hussmann

Hussmann IMPACT LWEGH Manuel utilisateur

Hussmann

Hussmann IMPACT Elite E2V Manuel utilisateur

Hussmann

Hussmann M5NX-E Mode d’emploi

Hussmann

Hussmann Impact Excel P2X-E Mode d’emploi

Hussmann

Hussmann LBN Guide rapide

Hussmann

Hussmann SHVSS-C Mode d’emploi

Hussmann

Hussmann LIE Mode d’emploi

Hussmann

Hussmann ENTYCE TY3 Manuel utilisateur

Hussmann

Hussmann MWG Manuel utilisateur

Hussmann

Hussmann IMPACT M1LDGE Mode d’emploi

Hussmann

Hussmann VRM Manuel utilisateur

Hussmann

Hussmann FWE Mode d’emploi

Hussmann

Hussmann BSM Manuel utilisateur

Hussmann

Hussmann CIDM-I Mode d'emploi

Hussmann

Hussmann LIG Mode d’emploi

Hussmann

Hussmann Impact C6HE Manuel utilisateur

Hussmann

Hussmann IMPACT LIGH Mode d’emploi

Hussmann

Hussmann Specialty Products CR3-D Mode d’emploi

Hussmann

Hussmann VR3-M Series Manuel utilisateur

Hussmann

Hussmann RCA Manuel utilisateur

Hussmann

Hussmann RGDC Manuel utilisateur

Hussmann

Hussmann RMID Mode d'emploi

Hussmann

Hussmann Q1-SS Mode d'emploi

Hussmann

Hussmann SPECIALTY TY3-3X4.5E-R Manuel utilisateur

Manuels marchandiseur populaires d'autres marques

FRIGOGLASS

FRIGOGLASS Flex 20 HC Manuel utilisateur

EPTA

EPTA COSTAN RHINO MULTI Manuel utilisateur

CASCO

CASCO Nano Cube Manuel utilisateur

True

True GDIM-26 Manuel utilisateur

Structural Concepts

Structural Concepts Oasis Mobile Series Instructions d'installation

Haussmann

Haussmann RL Manuel utilisateur

Howard McCray

Howard McCray R-CDS32E-4 Manuel utilisateur

EPTA

EPTA iarp Cool Emotions Delight Lite Manuel utilisateur

VALERA

VALERA BC 85 Manuel utilisateur

HL Display

HL Display 3eBin Manuel utilisateur

Dixie Narco

Dixie Narco DNCB 501E Manuel utilisateur

APW Wyott

APW Wyott Racer DMXD-30H Manuel utilisateur

Hoshizaki

Hoshizaki KD-90C Manuel utilisateur

Summit

Summit SCR1006 Manuel utilisateur

Delfield

Delfield Shelleyspeed SPM-28E Manuel utilisateur

EPTA

EPTA iarp Cool Emotions GLEE 40 Manuel utilisateur

Kysor/Warren

Kysor/Warren GranBering KW Mode d’emploi

Crane

Crane BevMAX Refresh 6 Media Manuel utilisateur