Hunter T Manuel utilisateur

For Your Records and Warranty

Assistance

Model Name: _____________________

Catalog/Model No.: ________________

Serial No.: ________________________

Date Purchased: ___________________

Where Purchased: _________________

For reference also attach your receipt or a

copy of your receipt to the manual. TYPE T Models

installation and

operation manual

for Hunter

Ceiling Fans

 42765-01•10/05/07

42765-01•10/05/07•HunterFanCompany

YournewHunter®ceiling fan is an addition to your home or oﬃce that

will provide comfort and performance for many years. is installation

and operation manual gives you complete instructions for installing

and operating your fan.

We are proud of our work. We appreciate the opportunity to supply

you with the best ceiling fan available anywhere in the world.

Before installing your fan, for your records and warranty assistance,

recordinformationfromthecartonandHunternameplatelabel

(located on the top of the fan motor housing).

Cautions and Warnings

•READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING

INSTALLATION. SAVE THESE INSTRUCTIONS.

•UseonlyHunterreplacementparts.

•Toreducetheriskofpersonalinjury,attachthefandirectlytothe

support structure of the building according to these instructions,

and use only the hardware supplied.

•Toavoidpossibleelectricalshock,beforeinstallingyourfan,

disconnect the power by turning oﬀ the circuit breakers to the

outlet box and associated wall switch location. If you cannot lock

the circuit breakers in the oﬀ position, securely fasten a prominent

warning device, such as a tag, to the service panel.

•Allwiringmustbeinaccordancewithnationalandlocalelectrical

codesandANSI/NFPA70.Ifyouareunfamiliarwithwiring,usea

qualiﬁed electrician.

•Toreducetheriskofpersonalinjury,donotbendtheblade

attachment system when installing, balancing, or cleaning the fan.

Neverinsertforeignobjectsbetweenrotatingfanblades.

•Toreducetheriskofre,electricalshock,ormotordamage,donot

useasolid-statespeedcontrolwiththisfan.UseonlyHunterspeed

controls.

Welcome

Table Of Contents

42765-01•10/05/07•HunterFanCompany

Installer’s Choice and Optional Accessories

Understanding Mounting and Installer’s Choice®

Hunter’spatented3-positionmountingsystemprovidesyoumaximum

installationexibilityandease.YoucaninstallyourHunterfaninone

of three ways, depending on ceiling height and your preference: Low

Prole,Standard,orAngledmounting.estepsinthismanualinclude

instructionsforallthreeInstaller’sChoicemountingmethods.

Considering Optional Accessories

ConsiderusingHunter’soptionalaccessories,includingawall-mounted

or remote speed control. To install and use the accessories, follow

the instructions included with each product. For quiet and optimum

performanceofyourHunterfan,useonlyHunterspeedcontrols.

For ceilings higher than 8 feet, you can purchase

Hunterextensiondownrods.AllHunterfansuse

sturdy3/4”diameterpipetoassurestabilityand

wobble-free performance.

Standard Mounting hangs from the

ceiling by a downrod (included).

Angled Mounting recommended for a

vaulted or angled ceiling

Support Brace

Standard

Mounting

Style

Ceiling

Outlet Box

Support Brace

Ceiling

Outlet Box

Angled

Mounting

Style

Low Proﬁle Mounting ﬁts close to the

ceiling, recommended for ceilings less

than 8 feet high

Support Brace

Low Proﬁle

Mounting

Style

Ceiling

Outlet Box

CAUTION: To

reduce the risk of

personalinjury,attach

the fan directly to the

support structure of

the building according

to these instructions,

and use only the

hardware supplied.

42765-01•10/05/07•HunterFanCompany

To install a ceiling fan, be sure you can do the following:

•Locatetheceilingjoistorothersuitablesupportinceiling.

•Drillholesforandinstallwoodscrews.

•Identifyandconnectelectricalwires.

•Lift40pounds.

Ifyouneedhelpinstallingthefan,yourHunterfandealercandirect

you to a licensed installer or electrician.

Gathering the Tools

You will need the following tools for installing the fan:

•Electricdrillwith9/64”bit

•Standardscrewdriver(magnetictiprecommended)

•Phillips-headscrewdriver(magnetictiprecommended)

•Wrenchorpliers

•Ladder(heightdependentuponinstallationsite)

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts. Refer to

the included Parts Guide. Check for any shipping damage to the motor

orfanblades.Ifanypartsaremissingordamaged,contactyourHunter

dealerorcallHunterTechnicalSupportDepartmentat866-268-1936.

Preparing the Fan Site

Before you begin installing the fan, follow all the instructions in

thepulloutsheetcalled“PreparingtheFanSite.”Properceilingfan

location and attachment to the building structure are essential for

safety, reliable operation, maximum eﬃciency, and energy savings.

Installing Multiple Fans?

If you are installing more than

one fan, keep the fan blades and

blade irons (if applicable) in sets,

as they were shipped.

1 • Getting Ready

42765-01•10/05/07•HunterFanCompany

CAUTION: To avoid possible electrical shock, before installing your fan,

disconnect the power by turning oﬀ the circuit breakers to the outlet box

and associated wall switch location. If you cannot lock the circuit breakers

in the oﬀ position, securely fasten a prominent warning device, such as a

tag, to the service panel.

2-1. Drill two pilot holes into the wood support structure through the

outermostholesintheoutletbox.epilotholesshouldbe9/64”

in diameter.

2-2.Yourfancomeswithfourneoprenenoiseisolators(“Isolators”).

Position the isolators between the ceiling plate and ceiling by

inserting the raised areas on each isolator into the holes in the

ceiling plate.

2-3. readtheleadwiresfromtheoutletboxdownthroughthehole

in the middle of the ceiling plate.

2-4. Aligntheslottedholesintheceilingplatewiththepilotholesyou

drilled in the wood support structure. For proper alignment use

slotted holes directly across from each other.

Note: e isolators should be ﬂush against the ceiling.

2-5. Placeaatwasheroneachofthetwo3”woodscrewsandpass

the screws through the slotted holes in the ceiling plate into the

pilot holes you drilled.

  Tightenthescrewsintothe9/64”pilotholes;donotuselubricants

on the screws. Do not over tighten.

Step 2-2

Flat Washer

3”WoodScrew

Steps 2-3 – 2-5

For Angled Ceilings: Be sure to

orient the ceiling plate so that the

arrows printed on the ceiling plate are

pointing toward the ceiling peak.

Ceiling

Plate

Isolator

2 • Installing the Ceiling Plate

42765-01•10/05/07•HunterFanCompany

Steps 3-5 – 3-6

Low Proﬁle Screw

Low Proﬁle Washer

Steps 3-2 – 3-3

Downrod

Canopy

Trim Ring

Set Screw

WARNING: Fan may fall if not assembled as directed in these

installation instructions.

3-1.Unbundlethewiresfromthefan.

For Standard or Angled mounting:

3-2.Toassemblefantohangdownfromaatorangledceiling,insert

the downrod through the canopy and canopy trim ring. Feed the

wires from the fan through the downrod.

3-3.Loosenthesquareheadsetscrewontheadaptertoinstallthe

pipe and ball assembly. Note: When the pipe and ball assembly

isfullyinstalled,2-3threadsonthepipewillstillbevisible;thisis

normal. Securely retighten the set screw with a wrench or pliers.

SkiptoStep3-7.

CAUTION: e adapter has a special coating on the threads. Do

notremovethiscoating;thecoatingpreventsthedownrodfrom

unscrewing. Once assembled, do not remove the downrod.

For Low Proﬁle mounting:

Note: For low proﬁle mounting, the downrod is replaced with the low

proﬁle washer.

3-4. Removethesetscrewfromtheadapter.

3-5.Placethelowprolewasher(lipup)intothecanopy.Besurethe

green ground wire is pointing up toward the ceiling.

3-6.Aligntheholesinthewasherwiththeholesintheadapter.

Assemblesecurelywiththreelowprolescrews.

3-7.Raisethefanandplacethehookontheceilingplatethroughthe

U-shapedholeintherim.

Step 3-7

U-shaped

Hole

3 • Assembling and Hanging the Fan

42765-01•10/05/07•HunterFanCompany

4 • Securing Fan to Secondary Support System

4-1. Find the looped end of the braided cable and insert it through the

ceiling plate and one of the holes in the outlet box into the ceiling.

4-2.Accessthesupportbraceintheceiling.Youmaynotbeabletodo

this from below the ceiling depending on your installation site.

4-3.Drivea#10x38mm(1-1/2”)woodscrewandwasherintotheside

ofthebracethatholdstheoutletbox.Leave3mm(1/8”)ofspace

between the support brace and the washer.

4-4. Wrap the braided cable around the support brace once creating a

complete circle.

4-5.Hooktheloopedendofthecableoverthewoodscrewsothatthe

braided cable lies between the washer and the support brace.

4-6. Tighten the loop and secure the screw and washer all the way

down to the support brace.

4-7. Coil up the excess cable.

4-8. Return to the fan so you can complete the fan wiring.

Step 4-1

3mm (1/8")

Steps 4-2 – 4-3 Steps 4-4 – 4-5 Steps 4-6 – 4-7

Support

Brace

Ceiling

Outlet Box Braided

Cable

42765-01•10/05/07•HunterFanCompany

fsdfsdf

5 • Wiring the Fan

All wiring must be in accordance with national and local electrical

codes and ANSI/NFPA 70-1999. If you are unfamiliar with wiring,

use a qualiﬁed electrician.

Wall switches are not included. Select an acceptable general-use switch

in accordance with national and local electrical codes.

5-1. Before attempting installation, make sure the power is still oﬀ.

5-2. To connect the wires, hold the bare metal leads together and place

a wire connector over them, then twist clockwise until tight. For

all these connections use the wire connectors provided.

5-3. Connectthebareorgreengroundwire(grounded)fromthe

ceiling to the green ground wire (grounded) from the ceiling plate

and the green ground wire from the fan.

5-4. Connect the white wire (ungrounded) from the ceiling to the

white wire (ungrounded) from the fan.

5-5. Connect the remaining wires as follows:

Dual Switch Wiring:

•eblackwire(ungrounded)fromtheceilingtotheblackwire

(ungrounded) from the fan

•eblack/whitewire(ungrounded)fromthefantothewire

(ungrounded) for the wall switch

Single Switch Wiring:

•eblackwire(ungrounded)fromtheceilingtotheblack

(ungrounded) and the black/white wire (ungrounded) from

the fan

CAUTION: Be sure no bare wire or wire strands are visible after

making connections.

5-6. Turn the splices upward and push them carefully back through the

ceiling plate into the outlet box.

5-7. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the

outlet box.

Single Switch Wiring

Dual Switch Wiring

Wire

Connector

42765-01•10/05/07•HunterFanCompany

6-1.Holdingthecanopy,raisethefanothehook.

6-2.Aligntheslotsinthecanopywiththetabsontheceilingplate.

6-3.Raisethecanopyovertheceilingplate.Rotatethecanopy

clockwise until the tabs on the ceiling plate totally engage with

the slots in the canopy.

6-4. Partially install the three canopy screws into the canopy one at a

time. Once all three screws are in, tighten them.

6-5. Usingbothhands,pushthecanopytrimringuptothetopofthe

canopy. e canopy trim ring will snap and lock into place.

Should you need to remove the canopy

trim ring, follow these steps:

1. Locate the tab indicators, small

bumps on top of tabs.

2. Press ﬁrmly on opposite sides of the

ring toward the canopy. e tabs will

ﬂex out releasing the trim ring from

the canopy.

Step 6-2

Canopy Trim

Ring

Canopy

Ceiling Plate

Step 6-3

Steps 6-4 – 6-5

Canopy

Screw

6 • Installing the Canopy and Canopy Trim Ring

42765-01•10/05/07•HunterFanCompany

7 • Assembling the Blades

Hunterfansuseseveralstylesoffanbladeirons(bracketsthatholdthe

blade to the fan).

7-1. Your fan may include blade grommets. If your fan has grommets,

insert them by hand into the holes on the blades.

7-2. Attacheachbladetoabladeironusingthreebladeassembly

screws. If you used grommets, the blades may appear slightly loose

after screws are tightened. is is normal.

7-3. Removetheblademountingscrewsandrubbershippingbumpers

from the motor. Note: Some blade mounting screws are installed

in the motor to secure shipping blocks.

7-4. For each blade, insert one blade mounting screw through the

blade iron, and attach lightly to the fan. Insert the second blade

mounting screw, then securely tighten both mounting screws.

Step 7-1 (Detail)

BladeAssembly

Screws

Usewithgrommet

Usewithoutgrommet

Grommet

Blade

Mounting

Screw

Steps 7-1 – 7-2

Step 7-4

Autres manuels pour T

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hunter Ventilateur

Hunter

Hunter 25692 Manuel utilisateur

Hunter

Hunter 23488 Manuel d'instructions

Hunter

Hunter Sencillo Manuel utilisateur

Hunter

Hunter 23947 Manuel

Hunter

Hunter 42616-01 Manuel utilisateur

Hunter

Hunter 23803 Manuel

Hunter

Hunter 41597-01 Manuel utilisateur

Hunter

Hunter Hunter Ceiling fans Manuel utilisateur

Hunter

Hunter 45037-01 Manuel d'instructions

Hunter

Hunter Mill Valley 59309 Manuel utilisateur

Hunter

Hunter 22459 Manuel utilisateur

Hunter

Hunter Builder 52217 Manuel utilisateur

Hunter

Hunter 90400 Manuel utilisateur

Hunter

Hunter 23721 Manuel utilisateur

Hunter

Hunter Donatella Manuel utilisateur

Hunter

Hunter 53240 Manuel d'instructions

Hunter

Hunter Hunter Ceiling Fan Manuel utilisateur

Hunter

Hunter Type 2 Series Manuel utilisateur

Hunter

Hunter Savoy Manuel d'instructions

Hunter

Hunter 45022-01 Manuel d'instructions

Hunter

Hunter 23943 Manuel

Hunter

Hunter 20578 Manuel

Hunter

Hunter 24852 Manuel

Hunter

Hunter 42652-01 Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage

Litex Industries

Litex Industries E-CGL52CB5C1 Manuel utilisateur

Lindab

Lindab LTDF Manuel utilisateur