Huawei EG8143A5 Manuel utilisateur

EG8143A5

Quick Start

Issue 02

Date 2019-09-10

HUAWEI TECHNOLOGIES CO., LTD.

Order Contact:

www.baudcom.com.cn

[email protected]

+862137709251

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device......................................................................................................................... 1

2 Connecting Cables.........................................................................................................................3

3 Indicator Description....................................................................................................................5

4 Technical Specifications...............................................................................................................7

5 FAQs.................................................................................................................................................8

EG8143A5

Quick Start Contents

1 Placing the Device

NOTE

lDo not install the ONT outdoors or in an outdoor cabinet.

lThe ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in other modes,

such as ceiling.

lKeep 10 cm clearance on all sides to ensure adequate ventilation.

lIt is recommended that the computer and ONT be put far away from electric appliances that generate

strong magnetic or electric fields, such as microwave ovens.

Mounting an ONT on the Desk

The figure below shows an ONT that is horizontally placed on a desk.

NOTE

The appearance shown in this document may be different from the actual appearance of the product. The

actual product prevails.

EG8143A5

Quick Start 1 Placing the Device

Mounting an ONT onto a Wall

1. Mark two positions with the same spacing as that between the two mounting holes of the

ONT using a marker on a wall.

2. Select a proper drill bit according to the outer diameter of the screws. Use a hammer drill

to drill the marked positions on the wall. Then clean the holes and install two expansion

bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 5 mm ends out

of the wall, and mount the ONT onto the screws.

NOTE

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.

EG8143A5

Quick Start 1 Placing the Device

2 Connecting Cables

NOTE

lThe fiber connector connected to the optical port on the wall varies depending on actual conditions.

lTo ensure normal use of fibers, make sure that the fiber bending radius is larger than 30 mm.

EG8143A5

Quick Start 2 Connecting Cables

No. Item Description

1 TEL Connects to the ports on a telephone or fax machine.

2 LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).

3 Power Connects to a power adapter.

4 On/Off Powers the ONT on or off.

5 CATV Connects to a TV.

6 Reset Press the button for a short time to reset the device, or press

the button for a long time (longer than 10s) to restore the

device to the default settings and reset the device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to

access the Internet. If an ONT cannot access the Internet after a reset,

contact your Internet service provider.

7 WPS When the WLAN is on, press the WPS button (> 3s) and

release the button to start Wi-Fi protected setup (WPS)

negotiation.

8 WLAN Used to enable or disable the WLAN function

- When the WLAN is disabled, press the WLAN button (> 3s)

and release the button to enable the WLAN.

- When the WLAN is enabled, press the WLAN button (> 3s)

and release the button to disable the WLAN.

9 Optical port The optical port is equipped with a rubber plug and connected

to a fiber for upstream transmission.

The type of the optical connector connected to the optical port

can be SC/APC.

EG8143A5

Quick Start 2 Connecting Cables

3 Indicator Description

Indicator Status Description

Power Steady on The ONT is powered on.

Off The power supply is cut off.

PON/LOS See the following table.

LAN1-

LAN4

Steady on The Ethernet connection is in the normal state.

Blinking Data is being transmitted over the Ethernet port.

Off The Ethernet connection is not set up.

TEL Steady on The ONT is registered with the softswitch but no

service flows are transmitted.

Blinks twice a

second

The ONT is registered with the softswitch, and data

is being transmitted on the port.

Blinks once every 2

seconds

The ONT fails to be registered with the softswitch.

Off The POTS port is disabled.

WLAN Steady on The WLAN function is enabled.

Blinking Data is being transmitted over the WLAN port.

Off The WLAN function is disabled.

WPS Steady on The WPS function is enabled.

Blinking A Wi-Fi terminal is accessing the system.

Off The WPS function is disabled.

EG8143A5

Quick Start 3 Indicator Description

Indicator Status Description

CATV Steady on The CATV function is enabled and CATV signals

are received.

Off The CATV function is disabled or no CATV signal

is received.

Status

No.

PON Status LOS Status Description

1 Off Off The ONT is prohibited by the upper-

layer device or blinks abnormally.

Contact the service provider for help.

2 Blinks twice a

second

Blinks twice a

second

3 Blinks twice a

second

Off The ONT attempts to set up a

connection with its upper-layer device.

4 Steady on Off A connection is set up between the

ONT and its upper-layer device.

5 Off Blinks once every

2 seconds

The ONT is not connected to fibers or

does not receive optical signals.

6 Blinks once

every 2 seconds

Blinks once every

2 seconds

The hardware is faulty.

EG8143A5

Quick Start 3 Indicator Description

4 Technical Specifications

Product Function

EG8143A5 l4 Ethernet ports (1GE + 3FE)

l1 POTS port

l1 CATV port

l2.4 GHz Wi-Fi

lPower adapter input: See the nameplate on the adapter.

lSystem power supply: See the nameplate on the device.

lAmbient temperature: 0ºC to +40ºC

lAmbient humidity: 5%–95% (non-condensing)

lDimensions (H x W x D): 34 mm × 175 mm × 115 mm (without external antenna and

pads)

lWeight: About 235 g

lMaximum system power consumption: 8.2 W

EG8143A5

Quick Start 4 Technical Specifications

Autres manuels pour EG8143A5

Table des matières

Autres manuels Huawei Routeur réseau

Huawei

Huawei OptiXstar EG8010Hv6-10 Manuel utilisateur

Huawei

Huawei AR550-8FE-D-H Manuel utilisateur

Huawei

Huawei B310 LTE CPE Manuel utilisateur

Huawei

Huawei B2368 Manuel utilisateur

Huawei

Huawei B315 LTE CPE Manuel utilisateur

Huawei

Huawei AR530 Series Manuel utilisateur

Huawei

Huawei HG8245H Caractéristiques techniques

Huawei

Huawei AR2200 Series Manuel utilisateur

Huawei

Huawei H122-372 Manuel utilisateur

Huawei

Huawei WIFI AX2 Manuel utilisateur

Huawei

Huawei NE20E-S8 Guide rapide

Huawei

Huawei B311As-853 Caractéristiques techniques

Huawei

Huawei AR1200 Series Manuel de la liste des pièces

Huawei

Huawei Quidway NetEngine80E Manuel utilisateur

Huawei

Huawei DG8045-50 Manuel utilisateur

Huawei

Huawei B818-260 Manuel utilisateur

Huawei

Huawei Mobile WiFi E5878 Instructions d'utilisation et d'entretien

Huawei

Huawei LTE CPE B593 Manuel utilisateur

Huawei

Huawei AR550 Series Manuel utilisateur

Huawei

Huawei H112 Manuel utilisateur

Huawei

Huawei AR1200 Series Mode d’emploi

Huawei

Huawei B681-54 Manuel utilisateur

Huawei

Huawei B593s-22 Manuel utilisateur

Huawei

Huawei AR100 Series Manuel d'utilisation

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité