Huawei SUN2000-8K-LC0 Manuel utilisateur

SUN2000-(8K, 10K)-LC0 Series

User Manual

Issue 01

Date 2023-09-15

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Digital Power Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei

Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features

described in this document may not be within the purchase scope or the usage scope. Unless otherwise

specied in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Digital Power Technologies Co., Ltd.

Address: Huawei Digital Power Antuoshan Headquarters

Futian, Shenzhen 518043

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes the following inverter models (also referred to as

SUN2000) in terms of the safety precautions, product introduction, installation,

electrical connections, power-on and commissioning, maintenance, and technical

specications. Read this document carefully before installing and operating the

inverter.

● SUN2000-8K-LC0

● SUN2000-10K-LC0

● SUN2000-8K-LC0-ZH

● SUN2000-10K-LC0-ZH

Intended Audience

This document is intended for:

● Installers

● Users

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

SUN2000-(8K, 10K)-LC0 Series

User Manual About This Document

Symbol Description

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal

injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal

injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 01 (2023-09-15)

This issue is the rst ocial release.

SUN2000-(8K, 10K)-LC0 Series

User Manual About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environment Requirements................................................................................................................................................. 6

1.4 Mechanical Safety................................................................................................................................................................... 8

2 Overview................................................................................................................................. 13

2.1 Model Number Description............................................................................................................................................... 13

2.2 Networking............................................................................................................................................................................. 14

2.3 Appearance............................................................................................................................................................................. 18

2.4 Working Modes..................................................................................................................................................................... 19

2.5 Label Description.................................................................................................................................................................. 20

2.6 Rapid Shutdown.................................................................................................................................................................... 22

3 Storage Requirements..........................................................................................................23

4 Installation..............................................................................................................................24

4.1 Installation Modes................................................................................................................................................................ 24

4.2 Installation Requirements.................................................................................................................................................. 24

4.2.1 Site Selection Requirements.......................................................................................................................................... 24

4.2.2 Clearance Requirements................................................................................................................................................. 25

4.2.3 Angle Requirements......................................................................................................................................................... 27

4.3 Tools.......................................................................................................................................................................................... 27

4.4 Checking Before Installation............................................................................................................................................. 29

4.5 Moving the Inverter............................................................................................................................................................. 30

4.6 Installing the Inverter on a Wall......................................................................................................................................30

4.7 Installing the Inverter on a Support............................................................................................................................... 33

5 Electrical Connections.......................................................................................................... 37

5.1 Precautions.............................................................................................................................................................................. 37

5.2 Preparing Cables................................................................................................................................................................... 38

5.3 Connecting a PE Cable........................................................................................................................................................ 42

5.4 Connecting an AC Output Power Cable........................................................................................................................44

5.5 Connecting DC Input Power Cables................................................................................................................................48

SUN2000-(8K, 10K)-LC0 Series

User Manual Contents

5.6 (Optional) Connecting Battery Cables.......................................................................................................................... 52

5.7 Connecting Signal Cables................................................................................................................................................... 54

5.7.1 Connecting RS485 Communications Cables (Inverter Cascading)................................................................... 57

5.7.2 Connecting RS485 Communications Cables (EMMA and Battery).................................................................. 59

5.7.3 Connecting RS485 Communications Cables (SmartGuard and Battery)....................................................... 62

5.7.4 Connecting RS485 Communications Cables (Power Meter and Battery)...................................................... 66

5.7.5 Connecting Rapid Shutdown Signal Cables..............................................................................................................68

5.8 (Optional) Installing the Smart Dongle and Anti-theft Components................................................................ 70

5.9 (Optional) Installing an Antenna.................................................................................................................................... 72

6 Check Before Power-On....................................................................................................... 74

7 Power-On and Commissioning........................................................................................... 75

7.1 Powering On the Inverter.................................................................................................................................................. 75

7.2 Creating a Plant.....................................................................................................................................................................77

7.2.1 Downloading the FusionSolar App..............................................................................................................................77

7.2.2 Installer Registration........................................................................................................................................................ 78

7.2.3 Creating a Plant and an Owner Account.................................................................................................................. 80

7.3 Setting Functions and Features Through Device Commissioning........................................................................82

7.3.1 Setting Common Parameters........................................................................................................................................ 82

7.3.2 (Optional) Setting the Physical Layout of the Smart PV Optimizers.............................................................. 83

7.3.3 AFCI........................................................................................................................................................................................ 84

7.3.4 DRM (Australia AS 4777)............................................................................................................................................... 86

7.4 Viewing the Plant Creation Status.................................................................................................................................. 87

8 System Maintenance............................................................................................................ 89

8.1 Routine Maintenance.......................................................................................................................................................... 89

8.2 System Power-O................................................................................................................................................................. 91

8.3 Troubleshooting..................................................................................................................................................................... 91

8.4 Replacing an Inverter........................................................................................................................................................ 103

8.5 Replacing a Fan................................................................................................................................................................... 104

8.6 Locating Insulation Resistance Faults..........................................................................................................................104

9 Technical Specications.....................................................................................................108

A Grid Codes............................................................................................................................ 113

B Connecting the Inverter on the App.............................................................................. 115

C Connecting the EMMA on the App.................................................................................119

D Baud Rate Negotiation..................................................................................................... 123

E Resetting Password.............................................................................................................127

F Contact Information........................................................................................................... 128

G Digital Power Customer Service..................................................................................... 130

H Precongured Certicate Disclaimer.............................................................................131

SUN2000-(8K, 10K)-LC0 Series

User Manual Contents

I Acronyms and Abbreviations.............................................................................................132

SUN2000-(8K, 10K)-LC0 Series

User Manual Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, and/or maintaining

the equipment, read this document, strictly follow the instructions provided

herein, and follow all the safety instructions on the equipment and in this

document. In this document, "equipment" refers to the products, software,

components, spare parts, and/or services related to this document; "the Company"

refers to the manufacturer (producer), seller, and/or service provider of the

equipment; "you" refers to the entity that transports, stores, installs, operates,

uses, and/or maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment shall be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● The equipment is damaged due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and other extreme weather conditions.

● The equipment is operated beyond the conditions specied in this document.

SUN2000-(8K, 10K)-LC0 Series

User Manual 1 Safety Information

● The equipment is installed or used in environments that do not comply with

international, national, or regional standards.

● The equipment is installed or used by unqualied personnel.

● You fail to follow the operation instructions and safety precautions on the

product and in the document.

● You remove or modify the product or modify the software code without

authorization.

● You or a third party authorized by you cause the equipment damage during

transportation.

● The equipment is damaged due to storage conditions that do not meet the

requirements specied in the product document.

● You fail to prepare materials and tools that comply with local laws,

regulations, and related standards.

● The equipment is damaged due to your or a third party's negligence,

intentional breach, gross negligence, or improper operations, or other reasons

not related to the Company.

1.1 Personal Safety

D ANGER

Ensure that power is o during installation. Do not install or remove a cable with

power on. Transient contact between the core of the cable and the conductor will

generate electric arcs or sparks, which may cause a re or personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re, electric shocks, or explosion, resulting in property damage, personal injury, or

even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The dielectric withstanding voltage level must comply with local laws,

regulations, standards, and specications.

SUN2000-(8K, 10K)-LC0 Series

User Manual 1 Safety Information

WARNING

During operations, wear personal protective equipment such as protective

clothing, insulated shoes, goggles, safety helmets, and insulated gloves.

Figure 1-1 Personal protective equipment

General Requirements

● Do not stop protective devices. Pay attention to the warnings, cautions, and

related precautionary measures in this document and on the equipment.

● If there is a likelihood of personal injury or equipment damage during

operations, immediately stop, report the case to the supervisor, and take

feasible protective measures.

● Do not power on the equipment before it is installed or conrmed by

professionals.

● Do not touch the power supply equipment directly or with conductors such as

damp objects. Before touching any conductor surface or terminal, measure

the voltage at the contact point to ensure that there is no risk of electric

shock.

● Do not touch operating equipment because the enclosure is hot.

● Do not touch a running fan with your hands, components, screws, tools, or

boards. Otherwise, personal injury or equipment damage may occur.

● In the case of a re, immediately leave the building or the equipment area

and activate the re alarm or call emergency services. Do not enter the

aected building or equipment area under any circumstances.

Personnel Requirements

● Only professionals and trained personnel are allowed to operate the

equipment.

– Professionals: personnel who are familiar with the working principles and

structure of the equipment, trained or experienced in equipment

operations and are clear of the sources and degree of various potential

hazards in equipment installation, operation, maintenance

SUN2000-(8K, 10K)-LC0 Series

User Manual 1 Safety Information

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Huawei Matériel réseau

Huawei

Huawei eSight V200R003C00 Manuel

Huawei

Huawei XMC-1 ODU Manuel utilisateur

Huawei

Huawei eSpace IAD104H Manuel utilisateur

Huawei

Huawei EchoLife HG8245Q Manuel utilisateur

Huawei

Huawei CR52-RPR/STM64-XFP Manuel utilisateur

Huawei

Huawei TP48200A-HT19C4-1 Manuel utilisateur

Huawei

Huawei FusionModule1000A20 Manuel utilisateur

Huawei

Huawei NetEngine-8000-M8 Manuel utilisateur

Huawei

Huawei FusionPower6000 3.0 Manuel utilisateur

Huawei

Huawei NIP6000E Manuel utilisateur

Huawei

Huawei CR52K-10GE Manuel utilisateur

Huawei

Huawei BYPASS OP9000 Manuel utilisateur

Huawei

Huawei RT-8LS Manuel utilisateur

Huawei

Huawei OptiX OSN 8800 T64 Manuel utilisateur

Huawei

Huawei BBU3900 V300 Manuel utilisateur

Huawei

Huawei OptiXstar EG8245X6-8N Manuel utilisateur

Huawei

Huawei CR-P2HM Manuel utilisateur

Huawei

Huawei RT-FIC-8SAE Manuel utilisateur

Huawei

Huawei EchoLife EG8143H5 Manuel utilisateur

Huawei

Huawei RT-NE20E-NPU Manuel utilisateur

Huawei

Huawei CR-R1UL Manuel utilisateur

Huawei

Huawei CR-P4CF Manuel utilisateur

Huawei

Huawei OptiXstar P612E Manuel utilisateur

Huawei

Huawei CR52-LPUF-20 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur