Huawei SUN600-5KTL-L0 Manuel utilisateur
SUN600-(5KTL, 6KTL)-L0
User Manual
Issue 04
Date 2023-02-17
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://e.huawei.com
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. i
About This Document
Purpose
This document describes the Smart Solar Inverter-(5KTL, 6KTL)-L0 (inverter for
short) in terms of its installation, electrical connection, commissioning,
maintenance, and troubleshooting. Before installing and operating the inverter,
ensure that you are familiar with the features, functions, and safety precautions
provided in this document.
Intended Audience
This document is applicable to:
● Installers
● Users
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
SUN600-(5KTL, 6KTL)-L0
User Manual About This Document
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. ii
Symbol Description
Supplements the important information in the main text.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Change History
Changes between document issues are cumulative. The latest document issue
contains all the changes made in earlier issues.
Issue 04 (2023-02-17)
● Updated 1 Safety Information.
● Updated 4.1 Checking Before Installation.
● Updated 5.1 Precautions.
● Updated 6 System Commissioning.
● Updated 8 System Maintenance.
Issue 03 (2022-02-25)
● Updated 2.1 Overview.
● Updated 10 Technical Parameters.
Issue 02 (2021-12-20)
● Updated 7.1.3 Creating a PV Plant and a User.
● Updated 7.2.1 Energy Control.
● Updated 10 Technical Parameters.
Issue 01 (2021-11-01)
This issue is the rst ocial release.
SUN600-(5KTL, 6KTL)-L0
User Manual About This Document
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. iii
Contents
About This Document................................................................................................................ ii
1 Safety Information.................................................................................................................. 1
1.1 Personal Safety.........................................................................................................................................................................2
1.2 Electrical Safety........................................................................................................................................................................4
1.3 Environment Requirements................................................................................................................................................. 6
1.4 Mechanical Safety................................................................................................................................................................... 8
2 Product Introduction............................................................................................................ 13
2.1 Overview.................................................................................................................................................................................. 13
2.2 Component Description...................................................................................................................................................... 16
2.3 Label Description.................................................................................................................................................................. 17
2.3.1 Enclosure Labels.................................................................................................................................................................17
2.3.2 Product Nameplate...........................................................................................................................................................19
2.4 Working Principles................................................................................................................................................................ 19
3 Inverter Storage..................................................................................................................... 22
4 System Installation............................................................................................................... 23
4.1 Checking Before Installation............................................................................................................................................. 23
4.2 Preparing Tools and Instruments.................................................................................................................................... 24
4.3 Determining the Installation Position............................................................................................................................25
4.4 Moving an Inverter............................................................................................................................................................... 29
4.5 Installing an Inverter............................................................................................................................................................29
4.5.1 Wall-Mounted Installation............................................................................................................................................. 30
4.5.2 Support-Mounted Installation.......................................................................................................................................32
5 Electrical Connection............................................................................................................36
5.1 Precautions.............................................................................................................................................................................. 36
5.2 Preparing Cables................................................................................................................................................................... 37
5.3 Connecting PE Cables.......................................................................................................................................................... 40
5.4 (Optional) Installing a Smart Dongle............................................................................................................................ 42
5.5 Installing a WLAN Antenna...............................................................................................................................................43
5.6 Connecting an AC Output Power Cable........................................................................................................................44
5.7 Connecting DC Input Power Cables................................................................................................................................47
5.8 (Optional) Connecting Signal Cables.............................................................................................................................51
SUN600-(5KTL, 6KTL)-L0
User Manual Contents
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. iv
6 System Commissioning........................................................................................................ 58
6.1 Verication Before Power-On........................................................................................................................................... 58
6.2 System Power-On................................................................................................................................................................. 59
7 Man-Machine Interaction....................................................................................................62
7.1 App Commissioning............................................................................................................................................................. 62
7.1.1 Downloading the FusionSolar App..............................................................................................................................62
7.1.2 (Optional) Registering an Installer Account............................................................................................................ 63
7.1.3 Creating a PV Plant and a User.................................................................................................................................... 64
7.2 Parameters Settings............................................................................................................................................................. 64
7.2.1 Energy Control.................................................................................................................................................................... 64
7.2.1.1 Grid-tied Point Control................................................................................................................................................. 64
7.2.1.2 Apparent Power Control on the Inverter Output Side...................................................................................... 69
7.2.2 AFCI........................................................................................................................................................................................ 70
7.2.3 IPS Check (for Italy CEI0-21 Grid Code Only)......................................................................................................... 72
7.2.4 DRM (Australia AS4777)................................................................................................................................................. 73
8 System Maintenance............................................................................................................ 76
8.1 System Power-O.................................................................................................................................................................76
8.2 Routine Maintenance.......................................................................................................................................................... 77
8.3 Troubleshooting..................................................................................................................................................................... 78
9 Inverter Disposal....................................................................................................................89
9.1 Removing an Inverter.......................................................................................................................................................... 89
9.2 Packing an Inverter.............................................................................................................................................................. 89
9.3 Disposing an Inverter.......................................................................................................................................................... 89
10 Technical Parameters......................................................................................................... 90
10.1 Inverter Technical Specications................................................................................................................................... 90
A Grid Code................................................................................................................................ 94
B Device Commissioning......................................................................................................... 96
C Resetting Password...............................................................................................................99
D Rapid Shutdown................................................................................................................. 102
E Locating Insulation Resistance Faults............................................................................103
F Acronyms and Abbreviations............................................................................................106
SUN600-(5KTL, 6KTL)-L0
User Manual Contents
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. v
1 Safety Information
Statement
Before transporting, storing, installing, operating, using, and/or maintaining the
equipment, read this document, strictly follow the instructions provided herein,
and follow all the safety instructions on the equipment and in this document. In
this document, "equipment" refers to the products, software, components, spare
parts, and/or services related to this document; "the Company" refers to the
manufacturer (producer), seller, and/or service provider of the equipment; "you"
refers to the entity that transports, stores, installs, operates, uses, and/or
maintains the equipment.
The Danger, Warning, Caution, and Notice statements described in this
document do not cover all the safety precautions. You also need to comply with
relevant international, national, or regional standards and industry practices. The
Company shall not be liable for any consequences that may arise due to
violations of safety requirements or safety standards concerning the design,
production, and usage of the equipment.
The equipment should be used in an environment that meets the design
specications. Otherwise, the equipment may be faulty, malfunctioning, or
damaged, which is not covered under the warranty. The Company shall not be
liable for any property loss, personal injury, or even death caused thereby.
Comply with applicable laws, regulations, standards, and specications during
transportation, storage, installation, operation, use, and maintenance.
Do not perform reverse engineering, decompilation, disassembly, adaptation,
implantation, or other derivative operations on the equipment software. Do not
study the internal implementation logic of the equipment, obtain the source code
of the equipment software, violate intellectual property rights, or disclose any of
the performance test results of the equipment software.
The Company shall not be liable for any of the following circumstances or
their consequences:
● The equipment is damaged due to force majeure such as earthquakes, oods,
volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,
typhoons, hurricanes, tornadoes, and other extreme weather conditions.
● The equipment is operated beyond the conditions specied in this document.
SUN600-(5KTL, 6KTL)-L0
User Manual 1 Safety Information
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 1
● The equipment is installed or used in environments that do not comply with
international, national, or regional standards.
● You fail to follow the operation instructions and safety precautions on the
product and in the document.
● You remove or modify the product or modify the software code without
authorization.
● You or a third party authorized by you cause the equipment damage during
transportation.
● The equipment is damaged due to storage conditions that do not meet the
requirements specied in the product document.
● You fail to prepare materials and tools that comply with local laws,
regulations, and related standards.
● The equipment is damaged due to your or a third party's negligence,
intentional breach, gross negligence, or improper operations, or other reasons
not related to the Company.
1.1 Personal Safety
D ANGER
Ensure that power is o during installation. Do not install or remove a cable with
power on. Transient contact between the core of the cable and the conductor will
generate electric arcs or sparks, which may cause a re or personal injury.
D ANGER
Non-standard and improper operations on the energized equipment may cause
re, electric shocks, or explosion, resulting in property damage, personal injury, or
even death.
D ANGER
Before operations, remove conductive objects such as watches, bracelets, bangles,
rings, and necklaces to prevent electric shocks.
D ANGER
During operations, use dedicated insulated tools to prevent electric shocks or short
circuits. The dielectric withstanding voltage level must comply with local laws,
regulations, standards, and specications.
SUN600-(5KTL, 6KTL)-L0
User Manual 1 Safety Information
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 2
WARNING
During operations, wear personal protective equipment such as protective
clothing, insulated shoes, goggles, safety helmets, and insulated gloves.
Figure 1-1 Personal protective equipment
General Requirements
● Do not stop protective devices. Pay attention to the warnings, cautions, and
related precautionary measures in this document and on the equipment.
● If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
● Do not power on the equipment before it is installed or conrmed by
professionals.
● Do not touch the power supply equipment directly or with conductors such as
damp objects. Before touching any conductor surface or terminal, measure
the voltage at the contact point to ensure that there is no risk of electric
shock.
● Do not touch operating equipment because the enclosure is hot.
● Do not touch a running fan with your hands, components, screws, tools, or
boards. Otherwise, personal injury or equipment damage may occur.
● In the case of a re, immediately leave the building or the equipment area
and activate the re alarm or call emergency services. Do not enter the
aected building or equipment area under any circumstances.
Personnel Requirements
● Only professionals and trained personnel are allowed to operate the
equipment.
– Professionals: personnel who are familiar with the working principles and
structure of the equipment, trained or experienced in equipment
operations and are clear of the sources and degree of various potential
hazards in equipment installation, operation, maintenance
SUN600-(5KTL, 6KTL)-L0
User Manual 1 Safety Information
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 3
– Trained personnel: personnel who are trained in technology and safety,
have required experience, are aware of possible hazards on themselves in
certain operations, and are able to take protective measures to minimize
the hazards on themselves and other people
● Personnel who plan to install or maintain the equipment must receive
adequate training, be able to correctly perform all operations, and understand
all necessary safety precautions and local relevant standards.
● Only qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
● Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will perform special tasks such as electrical operations,
working at heights, and operations of special equipment should possess the
required local qualications.
● Only authorized professionals are allowed to replace the equipment or
components (including software).
● Only personnel who need to work on the equipment are allowed to access
the equipment.
1.2 Electrical Safety
D ANGER
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or re may occur.
D ANGER
Non-standard and improper operations may result in re or electric shocks.
D ANGER
Prevent foreign matter from entering the equipment during operations. Otherwise,
equipment damage, load power derating, power failure, or personal injury may
occur.
WARNING
For the equipment that needs to be grounded, install the ground cable rst when
installing the equipment and remove the ground cable last when removing the
equipment.
SUN600-(5KTL, 6KTL)-L0
User Manual 1 Safety Information
Issue 04 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 4
Autres manuels pour SUN600-5KTL-L0
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Huawei Matériel réseau
Huawei
Huawei CZ36E-20Z Manuel utilisateur
Huawei
Huawei ME01-BSUA Manuel utilisateur
Huawei
Huawei HG8145V5 Manuel utilisateur
Huawei
Huawei iMaster NetEco V600R021C10 Manuel utilisateur
Huawei
Huawei EchoLife HG861 Manuel utilisateur
Huawei
Huawei DRH Manuel du propriétaire
Huawei
Huawei RRU3832 Manuel utilisateur
Huawei
Huawei CR52-MPUA Manuel utilisateur
Huawei
Huawei BBU3900 Manuel utilisateur
Huawei
Huawei CR52-10GE Manuel utilisateur
Huawei
Huawei EN83CTLC Manuel utilisateur
Huawei
Huawei PDU8000 Series Manuel utilisateur
Huawei
Huawei ST5110 Manuel utilisateur
Huawei
Huawei NE-FIC-ATM-E3 Manuel utilisateur
Huawei
Huawei CR52K-SFUC Manuel utilisateur
Huawei
Huawei OptiXstar P813E Manuel utilisateur
Huawei
Huawei eAN3810A Guide de référence rapide
Huawei
Huawei RT-FIC-1T1-V2 Manuel utilisateur
Huawei
Huawei BYPASS OP9000 Manuel utilisateur
Huawei
Huawei CR52-10GE Manuel utilisateur
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
