Huawei AR515 Series Manuel utilisateur

Quick Start Guide

AR515

03 (2018-10-26)

Part number: 31507749

Packing List

Installation accessory package:

- DC power input cable

- GPS+LTE diversity antenna

- Wi-Fi remote antennas

- Warranty card

- Certificate

- LTE main antenna

- Quick Start Guide

- Mounting brackets and screws

Site Environment

Do not place this product in an environment with flammable or explosive gases, or smoke.

The installation site must be free from leaking or dripping water or heavy dew. If the relative humidity is high,

use dehumidifiers or air conditioners with dehumidification features.

The installation site must be well ventilated, and the air vents of the router must not be blocked.

Do not place the router in a dusty environment.

Leave more than 100 mm clearance at two sides and the rear of the router for heat dissipation.

100mm

Safety Guidelines

To ensure personal and equipment safety, observe all the safety precautions on the equipment and in this

document. and items do not cover all the safety precautions and are only supplementary to

the safety precautions.

Follow all the safety precautions and instructions provided by Huawei. The safety precautions outlined in this

document are only those that Huawei can predict. Huawei is not liable for any consequence that results from

violation of regulations pertaining to safe operations or safety codes pertaining to the design, production,

and equipment use.

WARNING CAUTION

WARNING AR515GW-LM9-D and AR515CGW-L are class A products. In a domestic environment, these products may

cause radio interference in which case the user may be required to take the adequate measures.

During installation and maintenance, take ESD protection measures, for example, wear ESD gloves or an ESD

wrist strap.

During router transport, movement, and installation, prevent the router from colliding with objects like doors,

walls, or shelves.

This product is used in restricted scenarios and must be operated by trained personnel.

Do not place other objects on the router.

CAUTION

Figures in this document are for reference only and may not show the actual appearance of the router.

NOTE

AR515GW-LM9-D

- Power connector

- Cable tray

- Ground cable

- Warranty card

- Waterproof cover

- Binding cables

- Quick Start Guide

- Screws

AR515CGW-L

Installation accessory package:

Installing the Router

Connect cables to the router, bundle the cables with cable ties, and cut off redundant part of cable

ties with diagonal pliers.

Unlock the lock on the router, loosen the captive screws on the hard disk cage, and pull the hard

disk cage out.

Remove the hard disk connector.

Leave at least 100 mm of clearance around the router for heat dissipation.

Do not place other objects on the router.

If there is sufficient space in the vehicle, make the cable outlet side and hard disk side face left and right

respectively to facilitate maintenance.

If there is not sufficient space in the vehicle, make the cable outlet side face outward.

CAUTION

4.1 Installing AR515GW-LM9-D

Connect the hard disk connector to the hard disk, use two screws to fix them, and install them in

the hard disk cage.

While holding the hard disk with one hand, use a Phillips screwdriver to tighten the four M3x6

screws at the back of the router.

Insert the hard disk cage into the router, tighten the captive screws on the hard disk cage, and

lock the hard disk cage using the key.

Insert the SIM card into the SIM card holder.

Install the SIM card cover back and fix it with the six screws.

Use the Phillips screwdriver to remove the six screws on the SIM card cover, and then remove the

SIM card cover. Keep the screws for later use.

Fix the two mounting brackets on two sides of the router with six M5x10 screws using the Phillips

screwdriver.

Use a measuring tape to determine positions of four mounting holes for the mounting brackets on

the luggage rack. The diameter of each mounting hole is 6 mm.

Use four M5 nuts and bolts to fix the router on the luggage rack.

155.5 mm

451.5 mm

Adjust positions of the mounting holes if necessary.

NOTE

CAUTION The hard disk enclosure cannot be inserted or removed when the power is on.

Loosen the four screws on the hard disk enclosure using the Phillips screwdriver, and remove

the hard disk cover.

Loosen the four captive screws on the hard disk enclosure using the Phillips screwdriver, and

remove the hard disk tray.

Turn the key counterclockwise until it stops to unlock the hard disk lock, unlock the hard

disk lock, loosen the two fastening screws using the Phillips screwdriver, and pull out the

hard disk enclosure.

Installing hard disk and SIM cards

4.2 Installing AR515CGW-L

Install the hard disk tray to the hard disk enclosure, hold the connector in place, and then tighten

the four captive screws.

Install the hard disk cover back to the router, and then tighten the four screws.

Install a SIM card into the router.

Use the Phillips torque screwdriver to tighten the four M3x6 screws on the back of the hard disk

with a torque of 5.5 Kgf.cm to fix the hard disk on the hard disk tray in the correct direction.

b. Insert the SIM card into the SIM card holder. When you hear a click, the SIM card is completely

seated in the holder.

c. Install the SIM card cover back to the router, and then tighten the two screws.

abc

a. Use the Phillips screwdriver to loosen the two screws, and remove the SIM card cover from the

router. Keep the SIM card cover for later use.

Screws on the router must be tightened solid to ensure that the router can sustain long-time

vibration when the vehicle is running.

Sufficient clearance must be reserved around the router for later cable connection and router

maintenance.

Scenario 1 Installing the Router on a Horizontal Plane in a Vehicle

CAUTION

Connect all cables of the router.

Connect cables in the sequence from bottom to top and from right to left. Otherwise, some cables

cannot be connected properly.

If a waterproof cover needs to be installed, ensure that the ground cable is routed downwards.

The 04152259, 04152260, and 04152261 cables need to be wrapped by waterproof tapes to prevent

the power-off caused by water.

Connect the positioning pins on the cable tray to the bottom of the router, and then use the

Phillips screwdriver to tighten the two M4x8 screws to install the cable tray on the router.

In the vertical direction, categorize the cables into six groups based on the port positions, use

cable ties to bundle the cables, and fix them on the holes for binding cables on the cable tray.

NOTE

Waterproof tape

CAUTION

Install the router on a horizontal plane in the vehicle.

a. Attach the mounting brackets to the horizontal plane reserved for the router, and mark the

positions of the four mounting holes for the M4 bolts.

b. Secure the router on the plane with four ST4.2 self-tapping screws.

Leave at least 100 mm of clearance around the router for heat dissipation.

Do not place other objects on the router.

If the luggage rack is deep enough, make the cable outlet side and hard disk side face left and

right respectively to facilitate maintenance. Leave at least 400 mm of clearance on the hard disk

enclosure side.

Scenario 2 Installing the Router on a Luggage Rack

Use the Phillips screwdriver to tighten the four M4x10 screws to install the waterproof cover on

the cable tray.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Huawei Porte

Huawei

Huawei EchoLife HG520s Manuel utilisateur

Huawei

Huawei EchoLife HG532 Manuel utilisateur

Huawei

Huawei AR-Sc Series Manuel utilisateur

Huawei

Huawei HG658 V2 Manuel utilisateur

Huawei

Huawei B2268H Manuel utilisateur

Huawei

Huawei HG523 Manuel utilisateur

Huawei

Huawei HG659B Manuel utilisateur

Huawei

Huawei HG622 Manuel utilisateur

Huawei

Huawei B2201H-201 Caractéristiques techniques

Huawei

Huawei HG659 Manuel utilisateur

Huawei

Huawei EchoLife HG520 Manuel utilisateur

Huawei

Huawei E960 HSDPA Manuel utilisateur

Huawei

Huawei eA380-123 Manuel utilisateur

Huawei

Huawei HG659 Manuel utilisateur

Huawei

Huawei B970b Manuel utilisateur

Huawei

Huawei EchoLife HG532 Manuel utilisateur

Huawei

Huawei Pocket WiFi 3G Manuel utilisateur

Huawei

Huawei HG552e Manuel utilisateur

Huawei

Huawei HG655d Manuel utilisateur

Huawei

Huawei HG659 Manuel utilisateur

Huawei

Huawei HG622 Manuel utilisateur

Huawei

Huawei HG532s Manuel utilisateur

Huawei

Huawei DN8245V Manuel utilisateur

Huawei

Huawei HG658 Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur

RTA

RTA 460MCBC-N2E Fiche technique