HP StorageWorks 8B - FC Entry Switch Manuel utilisateur

user's guide

version 3.0

advanced performance monitoring

www.hp.com

Notice

Edition: E1201

Hewlett-Packard Company makes no warranty of any kind with

regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

This document contains proprietary information, which is protected

by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without the prior

written consent of Hewlett-Packard. The information contained in

this document is subject to change without notice.

Use, duplication, or disclosure by government is subject to

restrictions as set forth in subdivision (c) (1) (ii) of the Rights in

Technical Data and Computer Software Clause at DFARS

252.227.7013.

Warranty

If you have any questions about the warranty for this product,

contact your dealer or local Hewlett-Packard sales representative.

Trademarks

BROCADE, the Brocade B weave logo, Brocade: the Intelligent

Platform for Networking Storage, SilkWorm, and SilkWorm

Express, are trademarks or registered trademarks of Brocade

Communications Systems, Inc. or its subsidiaries in the United

States and/or in other countries.

All other brands, product or service namesare or may be trademarks

or service marks of, and are used to identify products of services of

their respective owners.

Safety notices

Any servicing, adjustment, maintenance, or repair must be

performed only by authorized service-trained personnel.

Advanced Performance Monitoring User’s Guide iii

Contents

Preface

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Related Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Getting Software Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Chapter 1 Introducing Advanced Performance Monitoring

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Terminology Used in this Document . . . . . . . . . . . . . . . . . . 1-2

Performance Monitoring with Telnet Commands . . . . . . . . . . . . . . . . . 1-2

AL_PA Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

End-to-end Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Filter-based Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Performance Monitoring with Web Tools . . . . . . . . . . . . . . . . . . . . . . . 1-3

Predefined Performance Graphs. . . . . . . . . . . . . . . . . . . . . . 1-3

User-defined Graphs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Performance Graph Formats. . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Performance Graph Canvas . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Chapter 2 Installing Advanced Performance Monitoring

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installing Through Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installing through Web Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

iv Advanced Performance Monitoring User’s Guide

Chapter 3 Using Advanced Performance Monitoring

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Web Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Telnet Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

AL_PA Performance Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Displaying the CRC Error Count . . . . . . . . . . . . . . . . . . . . . 3-2

Clearing the CRC Error Count . . . . . . . . . . . . . . . . . . . . . . . 3-2

End-to-end Performance Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Adding End-to-end Monitors . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Setting a Mask for End-to-End Monitors . . . . . . . . . . . . . . . 3-4

Displaying the End-to-end Mask of a Port . . . . . . . . . . . . . . 3-6

Displaying End-to-end Monitors . . . . . . . . . . . . . . . . . . . . . 3-6

Deleting End-to-End Monitors . . . . . . . . . . . . . . . . . . . . . . . 3-7

Clearing End-to-End Monitor Counters . . . . . . . . . . . . . . . . 3-8

Filter-based Performance Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Adding Standard Filter-Based Monitors. . . . . . . . . . . . . . . . 3-8

Adding User-Defined Filter-Based Monitors . . . . . . . . . . . . 3-9

Displaying Filter-Based Monitors. . . . . . . . . . . . . . . . . . . . . 3-10

Deleting Filter-Based Monitors . . . . . . . . . . . . . . . . . . . . . . 3-11

Clearing Filter-Based Monitor Counters . . . . . . . . . . . . . . . 3-12

Saving and Restoring Monitor Configuration . . . . . . . . . . . . . . . . . . . . 3-12

Glossary

Index

Advanced Performance Monitoring User’s Guide v

Preface

Advanced Performance Monitoring is a licensed option and requires a valid license key to function.

It is included and enabled in switches with the performance upgrade option. It is supported for the

HP Surestore FC 1Gb/2Gb Entry Switch 8B, FC 1Gb/2Gb Switch 8B and FC 1Gb/2Gb Switch 16B

using Fabric OS version 3.0.1b or later.

About This Guide

This guide provides the following information about Advanced Performance Monitoring:

Related Publications

Related product information can be found in the following publications.

Provided with the FC Entry Switch 8B and FC Switch 8B:

•HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Getting Started

Guide (A7346-90902)

•HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Documentation

CD (A7346-11001)

Chapter 1

Introducing Advanced Performance

Monitoring

Overview of Advanced Performance Monitoring.

Chapter 2

Installing Advanced Performance Monitoring Instructions for installing Advanced

Performance Monitoring using telnet commands.

Chapter 3

Using Advanced Performance Monitoring Information about configuring and using the

Advanced Performance Monitoring telnet

commands.

vi Advanced Performance Monitoring User’s Guide

Provided on the FC Entry Switch 8B and FC Switch 8B Documentation CD, and at the HP Web site

at http://www.hp.com/support/fc8B:

•HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Getting Started

Guide (A7346-90902)

•HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Installation and

Reference Guide

•Fabric OS Reference Manual, version 3.0

•Fabric OS Procedures Guide, version 3.0

•Fabric OS Version 3.0.1b Release Notes

•Fabric Watch User’s Guide, version 3.0

•QuickLoop User’s Guide, version 3.0

•Web Tools User’s Guide, version 3.0

•Distributed Fabrics User’s Guide, version 3.0

•Zoning User’s Guide, version 3.0

•MIB Reference Manual, version 3.0

•ISL Trunking User’s Guide, version 3.0

•Advanced Performance Monitoring User’s Guide, version 3.0

•Merging Heterogeneous Fabrics Instructions

Provided with the FC 16B:

•HP Surestore FC 1Gb/2Gb Switch 16B Quick Start Guide (A7340-96002)

•HP Surestore FC 1Gb/2Gb Switch 16B Documentation CD (A7340-11001)

Provided on the FC 1Gb/2Gb Switch 16B Documentation CD and at the HP Web site at

http://www.hp.com/support/fc16B:

•HP Surestore FC 1Gb/2Gb Switch 16B Quick Start Guide (A7340-96002)

•HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide

•Fabric OS Reference Manual, version 3.0

•Fabric OS Procedures Guide, version 3.0

•Fabric OS Version 3.0.1 Release Notes

•Fabric Watch User’s Guide, version 3.0

•QuickLoop User’s Guide, version 3.0

•Web Tools User’s Guide, version 3.0

•Distributed Fabrics User’s Guide, version 3.0

•Zoning User’s Guide, version 3.0

•MIB Reference Manual, version 3.0

•ISL Trunking User’s Guide, version 3.0

•Advanced Performance Monitoring User’s Guide, version 3.0

•Merging Heterogeneous Fabrics Instructions

Information about Fibre Channel standards and Fibre Channel in general can be found on the Fibre

Channel Industry Association Web site, located at http://www.fibrechannel.com.

Advanced Performance Monitoring User’s Guide vii

Getting Help

For information for the FC Entry Switch 8B and FC Switch 8B, visit the HP Web site at

http://www.hp.com/support/fc8B. For the most current technical support information for the FC 16B,

visit the HP Web site at http://www.hp.com/support/fc16B. This includes hardware and software

support, all repairs, and spare components.

Be prepared to provide the following information to the support personnel:

•Switch serial number

•Switch world wide name

•Output from the supportShow telnet command

•Detailed description of the problem

•Topology configuration

•Troubleshooting steps already performed

Getting Software Updates

For information on obtaining software updates contact your HP account representative or technical

support.

viii Advanced Performance Monitoring User’s Guide

Advanced Performance Monitoring User’s Guide 1-1

Chapter

Introducing Advanced Performance Monitoring

This chapter provides the following information:

•Overview on page 1-1

•Performance Monitoring with Telnet Commands on page 1-2

•Performance Monitoring with Web Tools on page 1-3

Overview

Advanced Performance Monitoring provides SAN performance management through an

end-to-end monitoring system that enables you to:

•Increase end-to-end visibility into the fabric

•Enable more accurate reporting for service level agreements and charged access applications

•Improve performance tuning and resource optimization

•Shorten troubleshooting time

•Promote better capacity planning

•Simplify administration and setup

•Increase productivity with preformatted and customizable screens and reports

Features

The Advanced Performance Monitoring product:

•Measures the bandwidth consumed by individual routes (host-target pairs)

•Provides device performance measurements by port, AL_PA, and LUN

•Reports CRC error measurement statistics

•Measures Trunking performance

•Compares IP vs. SCSI traffic on each port

•Includes a wide range of predefined reports

•Allows you to create customized user-defined reports

Administration

Advanced Performance Monitoring is an optionally licensed product that runs on FC Entry Switch

8B, FC Switch 8B, and FC 16B switches.

1-2 Advanced Performance Monitoring User’s Guide

Introducing Advanced Performance Monitoring

If you have a fabric with HP Brocade 2400/2800, FC 6164, FC Entry Switch 8B, FC Switch 8B, or

FC 16B switches, you can take advantage of the end-to-end performance monitoring features by

installing an FC Entry Switch 8B, FC Switch 8B, or FC 16B switch anywhere in the route path

between the Source ID and the Destination ID.

You can administer performance monitoring through either telnet commands or Web Tools. If you

use Web Tools, a Web Tools license must also be installed on the switch.

Terminology Used in this Document

AL_PA Arbitrated Loop Physical Address. An 8-bit value used to uniquely identify an

individual port within a loop. A loop may have one or multiple AL_PAs.

SID 3-byte Source ID of the originator device, in the “0xDomainAreaALPA”

(0xDDAAPP) format.

DID 3-byte Destination ID of the destination device, in the “0xDomainAreaALPA”

(0xDDAAPP) format.

CRC Cyclic redundancy check; an error detection method. The CRC is 32 bits in the

frame, after the data field, and before the EOF (end of frame).

Performance Monitoring with Telnet Commands

Telnet commands provide three different types of performance monitoring:

•AL_PA monitoring

•End-to-end monitoring

•Filter-based monitoring

Refer to Chapter 3, Using Advanced Performance Monitoring, for detailed information on how to

use the telnet commands to monitor performance.

AL_PA Monitoring

AL_PA monitoring provides information regarding the number of CRC errors occurring in Fibre

Channel frames in a loop configuration. AL_PA monitoring collects CRC error counts for each

AL_PA attached to a specific port.

End-to-end Monitoring

End-to-end monitoring provides information regarding transaction performance between the

transaction source (SID) and destination (DID) on a fabric or a loop. Up to eight SID-DID pairs per

port can be specified. For each of the SID-DID pairs, the following information is available:

•CRC error count on the frames for the SID-DID pair

•Fibre channel words that have been transmitted through the port for the SID-DID pair

Autres manuels pour StorageWorks 8B - FC Entry Switch

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Stockage

HP Open View Manuel du produit

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Mode d’emploi

HP StorageWorks DAT 72 Manuel utilisateur

HP D2220sb Manuel utilisateur

HP 705 Guide de démarrage rapide

HP StorageWorks ESL9322S2 Manuel utilisateur

HP StorageWorks 600 - Modular Disk System Manuel utilisateur

HP StoreOnce B6000 Manuel utilisateur

HP POD 40c G2 Manuel

HP nimblestorage CS235 Manuel utilisateur

HP StorageWorks P4000 Series Manuel utilisateur

HP StorageWorks Ultrium 215 Instructions d'utilisation

HP StoreOnce B6000 Manuel utilisateur

HP XP20000/XP24000 Manuel utilisateur

HP Storevirtual 4000 Manuel utilisateur

HP Ultrium 215 Instructions d'utilisation

HP StoreOnce B6000 Mode d'emploi

HP VS80 - StorageWorks DLT VS 80 Tape Drive Manuel utilisateur

HP Storevirtual 4000 Manuel utilisateur

HP StorageWorks NAS 8000 - Version 1.6.X Manuel d'utilisation

HP dat72 5242 Manuel utilisateur

HP Surestore 64 - Director Switch Manuel utilisateur

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Manuel utilisateur

HP Compaq Presario,Presario 4400 Mode d’emploi

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur