HP StorageWorks 8000 - NAS Guide d'installation

HP Surestore NAS 8000 High Availability Solution Integration Manual (SIM) 1

HP Surestore NAS 8000

High Availability Solution

Integration Manual (SIM)

Read Me First

This binder includes the details of the integration tasks that Hewlett-Packard or an authorized

reseller has performed. The first section, Solution Integration and Product Configuration

Overview, is intended to give you a detailed picture of the solution you ordered from Hewlett

Packard.

The remaining sections of this binder will be used by your installation specialist, who will work

with you to plan and install your HP Network Attached Storage (NAS) 8000 High Availability

(HA) system according to your specific requirements.

Before installing the HP NAS 8000 HA solution, you must first complete the items in the

“Network and Storage Planning” section of this binder. If your installation specialist has not

done so already, he or she will contact you to schedule a joint planning session.

After the planning is complete, your installation specialist will perform tasks specified in this

binder’s “Installation Guide” section.

We sincerely hope that you will be delighted with our integration services and we are looking

forward to hearing from you.

Format Conventions

WARNING Identifies a hazard that can cause personal injury

Caution Identifies a hazard that can cause hardware or software damage

Note Identifies significant concepts or operating instructions

2 HP Surestore NAS 8000 High Availability Solution Integration Manual (SIM)

Binder Contents

This binder contains the following sections:

Notice

Hewlett-Packard Company makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the furnishing, performance, or use of

this material.

This document contains proprietary information, which is protected by copyright. No part of

this document may be photocopied, reproduced, or translated into another language without

the prior written consent of Hewlett-Packard. The information contained in this document is

subject to change without notice.

Trademark Information

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems,

Inc. in the U.S. and other countries.

Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft

Corporation.

UNIX is a registered trademark of The Open Group.

Section Audience Purpose

1. Read Me First Customer IT administrator Introduction

2. Solution Integration and

Product Configuration

Overview

Customer IT administrator Product information

3. Network and Storage

Planning

Installation specialist and

customer IT administrator

Pre-installation planning

session

4. Installation Guide Installation specialist Hardware installation and

software configuration

5. Safety Installation specialist and

customer IT administrator

Warnings and regulatory

information

6. Warranty and Support Customer IT administrator Warranty and technical

support contracts

Solution Integration and Product Configuration Overview 3

Solution Integration and

Product Configuration Overview

This section contains the following documents, which were customized and inserted by the

Integration Center:

■Deployment information

■Rack, server and component configurations

■Parts list

■Network, cabling, and power connection diagrams

4 Solution Integration and Product Configuration Overview

Network and Storage Planning 5

Network and Storage Planning

This section contains pre-planning materials that the installation specialist can review with the

customer before the NAS 8000 system arrives onsite. It includes:

■System overview: a conceptual overview of the storage system of the HP NAS 8000 HA,

including:

—Storage Overview and Terminology

—HA Storage Configuration

■Planning worksheets to record the required network and storage settings for the NAS 8000

HA system. The information in the planning worksheets is required to install and configure

the system:

—Calculating Available Disk Space

—Storage Planning

—High Availability Planning

—Network Planning

You need to construct an overall storage architecture by:

1. Determining the amount of total storage available

2. Deciding how to allocate it to different groups or functions

Storage space is spread across volume groups. In these volume groups, file volumes divide the

disk space. It is important to plan storage space prior to creating file volumes. Although the HP

NAS 8000 HA lets you expand volume groups later, you may want to reserve extra space

during setup to allow for the use of snapshots. For more information, see “Snapshots” on

page 7.

6 Network and Storage Planning

Storage Overview and Terminology

The HP NAS 8000 HA is an easy-to-manage storage solution for heterogeneous environments

including Windows, UNIX, and Linux.

The storage space on the HP NAS 8000 HA is made up of physical and logical storage:

■Physical storage refers to the hardware used for data storage.

■Logical storage is created by software that organizes your physical storage into file

volumes and directories.

In addition, the HA configurations include high-availability features such as redundant

hardware and failover packages.

Work with the customer to construct an overall storage architecture determining the total

amount of storage available and how it should be allocated to different groups or functions.

Data protection, including two RAID levels and active spare settings, should also be

considered.

Physical Storage

The HP NAS 8000 Direct Attach solutions use either the HP Virtual Array 7100 or the HP

Virtual Array 7400 series high-performance, high-availability, multi-terabyte storage arrays.

One- and two-array configurations are supported.

Logical Storage

Virtual Array

The term “Virtual Array” refers to the way the disks within the array are treated as a pool of

data storage blocks instead of real physical disks.

Because data is spread across all of the disks in the array, logical-to-physical data maps keep

track of where the data is physically located on the disks in the array. These maps are stored in

array controller cache memory. The host has no visibility of the cache data maps; it is simply

presented with logical units (LUNs) for data storage operations.

Logical Unit Number

A logical unit number (LUN) is a logical aggregation of space on physical drives. LUNs are

unique identifiers that enable the controller to differentiate between separate devices (each of

which is a logical unit). Each LUN is a unique number that identifies a specific unit of storage.

The HP NAS 8000 HA supports up to 127 LUNs in single-array direct-attach configurations

and up to 31 LUNs in FC-attach multiple-array configurations.

Volume Groups

A volume group is the aggregation of one or more LUNs. Volume groups combine the space

from LUNs and make the space accessible to the file system for creating file volumes and

directories, which can then be made accessible to users.

File Volumes

A volume group is divided into one or more file volumes. File volumes are the basic unit of

logical storage for a file system on the HP NAS 8000 HA. File volumes can be further

subdivided into individual directories.

Network and Storage Planning 7

Directories

Directories let you organize information. Directories contain files or other persistent data

structures in a file system that contains information about other files. Directories are usually

organized hierarchically and may contain both files and other directories, and are used to

organize collections of files for applications or convenience.

Snapshots

Snapshots are an important part of data-protection plans. A good data-protection plan should

include a backup strategy, storage redundancy provided by RAID levels, and snapshots.

Snapshots provide nearly instantaneous access to previous versions of a file stored on the HP

NAS 8000 HA solution.

A snapshot is a read-only picture of a file volume at a specific point in time. When you create

a snapshot of a file volume, the snapshot initially consumes zero physical space. However, as

users modify the file volume, the snapshot tracks changes between the original file volume and

the modified file volume. If an error occurs and a user needs to revert to the previous version,

the snapshot version of the file can be restored.

Snapshots consume storage space. When planning storage, consider how dynamic your data

will be. With file volumes in which data changes rapidly, snapshots will consume a larger

amount of space. At the extreme limit, a file volume can change so much from the original

information that the snapshot consumes the same amount of space as the original data.

Typically, data does not change so rapidly, and the usage and growth of snapshot space is

relatively slow.

Snapshots are optional and may be created at any time after the basic storage configuration is

complete. Users can add or resize a snapshot at a later time if there is enough free space

available in the volume group.

8 Network and Storage Planning

High Availability

The HP NAS 8000 HA solution includes a

cluster

, or group, of two NAS servers that function as

a unified system. The cluster is managed by a Quorum server.

The main purpose of high-availability clusters is to provide a higher degree of storage

availability to client systems than is possible with a single server. This is accomplished by

eliminating single points of failure and providing functional redundancy. Uninterrupted service

is provided by failing over file serving capabilities (see “Failover Packages” on page 8) to a

secondary server in the event of a failure in the primary server in the cluster.

■The NAS servers provide failover services for each other.

■The Quorum server manages the NAS servers, or

cluster nodes

, and provides cluster

arbitration services that prevent data corruption.

Clusters

HA Clusters provide a higher degree of storage availability than is possible with a single

server. This is provided by:

■Hardware component redundancy designed to eliminate single points of failure. Each

cluster consists of two or more NAS servers (nodes) plus one Quorum server.

■Software failover capabilities. All storage is controlled by packages which are the smallest

units of failover in the cluster.

Failover Packages

When a package failure is detected, the package is halted and will fail over to another node,

provided that an eligible adoptive node is present. Each package and its associated resources

are monitored independently. This allows failures that are limited to a single package to be

handled without affecting the state of other packages.

The NAS solution supports two failover models:

■Active/Active (or “Dual Active”) means that all cluster nodes can be serving data

simultaneously. The nodes will provide failover services for each other, but can be fully

utilized at all times. This mode is achieved by configuring failover packages to run on both

cluster nodes – effectively dividing the storage between the nodes.

■Active/Passive (or “Single Active”) means that one server is actively serving data while the

other node is in full-time stand-by mode, becoming active only when the other node fails.

This mode can be realized by configuring all of the failover packages and storage to run on

only one node. Without any packages to run, the other node will have nothing to do but

wait and monitor the other node for failure.

Network and Storage Planning 9

Data Protection

RAID Levels

Redundant Array of Inexpensive Disks (RAID) technology uses different industry-standard

techniques for storing data and maintaining data redundancy. These techniques, called “RAID

levels,” define the method used for distributing data on the disks in a logical unit (LUN). The

storage arrays used in the HP NAS 8000 HA solution support the following RAID levels:

■RAID 1+0.

RAID 1+0.RAID 1+0.

RAID 1+0. RAID 1+0 provides data redundancy and good performance. However, the

performance is achieved by using a less efficient technique of storing redundant data called

“mirroring.” Mirroring maintains two sets of the data: a primary set and a backup set, or

“mirror”, of the primary set. Therefore, half of the disk space is consumed by redundant

data.

■AutoRAID

AutoRAIDAutoRAID

AutoRAID. AutoRAID is a combination of RAID 1+0 and 5DP (RAID 5 Double Parity).

RAID 5DP provides data redundancy and improves cost-efficiency by using a more efficient

method of storing redundant data. However, there is a performance penalty for each write

operation.

AutoRAID relieves you of many of the decisions regarding RAID levels and data location by

automatically selecting RAID 1+0 or RAID 5DP depending on the usage patterns of the

data. AutoRAID automatically manages your data for you, providing redundancy and high

performance with minimal involvement. This configuration eliminates the requirement for

the system administrator to understand and configure RAID levels.

For additional information on RAID settings, see your storage array user’s guide or search for

RAID levels at www.hp.com.

Active Spare

The active spare feature in the storage array offers increased protection against disk failure.

An active spare ensures that the array can restore data redundancy and performance as

quickly as possible following a hard disk failure.

An active spare reserves capacity to perform a rebuild in the event of a disk failure. If you are

using disks of different capacities in your array, active spare reserves enough space to rebuild

the largest disk. As with logical volumes, the capacity reserved for the active spare is

distributed across all the disks in the array; no one physical disk contains the active spare.

Active spare is similar to the dedicated hot spare disks used in some conventional arrays.

However, those arrays let the hot spare remain idle until it is needed. This array uses the active

spare for RAID 1+0 storage until the spare is needed. This provides the added benefit of

enhancing performance while also protecting against disk failure.

10 Network and Storage Planning

HA Storage Configuration

This section provides suggestions for configuring the storage on a NAS 8000 with

high availability features.

On a simple direct-attach NAS system without HA features, the simplest way to configure the

storage is to create a single LUN for the entire array and create one volume group with multiple

file volumes beneath it. However, in an HA cluster with two NAS Servers, each volume group

can be active on only one NAS server, or

node

, at a time. Therefore, if you are using active/

active failover packages (see “Failover Packages” on page 8), you must create at least two

volume groups so each node can access some of your storage.

When determining how many LUNs and volume groups to create, consider the following:

■A volume group can be active on only one node at a time.

■A volume group can be assigned to only one failover package.

■File volumes can’t be split between packages or nodes.

■Multiple volume groups can be assigned to the same package.

■A package can only run on one node at a time.

■The HA cluster is limited to 30 packages total (both nodes combined).

■A package is the smallest unit of failover.

■A volume group is the smallest unit of storage that can be failed over.

■If a package contains multiple volume groups and a single volume group, file volume or

even share fails, the entire package will be failed over.

■More packages means a higher degree of granularity to balance the packages between the

nodes and detect failures.

■More packages also results in higher complexity in the cluster configuration and requires

more virtual IP addresses to keep track of.

■The packages should be divided between the cluster nodes such that the storage access

load (from client systems) will be balanced. This may or may not correspond to balanced

storage capacity between the nodes.

The illustrations on the following pages depict three common storage configurations:

■Single array with one LUN and one Volume Group for active/passive failover

configurations.

■Single array with multiple LUNs, volume groups and packages.

■Multiple arrays, LUNs, volume groups and packages.

Autres manuels pour StorageWorks 8000 - NAS

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Stockage

HP StorageWorks XP48 - Disk Array Manuel utilisateur

HP Colorado 5GB C4354A Manuel utilisateur

HP dat72 5242 Manuel utilisateur

HP AH164A - StorageWorks 1/8 G2 Tape Autoloader Ultrium... Manuel utilisateur

HP 3PAR StoreServ 7000 Manuel technique

HP X1800sb Manuel utilisateur

HP Surestore Tape Library Model 10/180 Manuel utilisateur

HP R/T2200 G4 ERM Instructions d'installation

HP Surestore Disk Array 12h - And FC60 Manuel utilisateur

HP 3PAR StoreServ 7200 2-node Manuel utilisateur

HP StorageWorks ESL9595S2 Manuel utilisateur

HP Surestore 64 - Director Switch Manuel utilisateur

HP StorageWorks XP10000 - Disk Array Manuel utilisateur

HP StorageWorks 7110 - Virtual Array Manuel utilisateur

HP StorageWorks P2000 Manuel utilisateur

HP Surestore 64 - Director Switch Manuel utilisateur

HP 7957A Manuel utilisateur

HP MSL4048 - StorageWorks Ultrium 920 Tape... Mode d’emploi

HP XP20000/XP24000 Manuel utilisateur

HP C5658A - SureStore DLT 70e Tape Drive Manuel utilisateur

HP StorageWorks 7100 - Virtual Array Guide rapide

HP 349237-B21 - 80 GB Hard Drive Manuel utilisateur

HP 418371-B21 - Dual Port 72 GB Hard Drive Manuel utilisateur

HP StorageWorks DAT 40i Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur