HP D2D100 Mode d’emploi

Autres manuels pour D2D100

3

Table des matières

Autres manuels HP Stockage

HP

HP A7518B - StorageWorks SDLT 600 Tape Drive Manuel utilisateur

HP

HP HD1600 Manuel utilisateur

HP

HP StorageWorks 1000 - Modular Smart Array Manuel de service

HP

HP StoreOnce 3100 Guide de l'utilisateur

HP

HP StorageWorks 8000 - NAS Guide d'installation

HP

HP STOREEVER LTO 4 Manuel utilisateur

HP

HP Surestore 64 - Director Switch Manuel utilisateur

HP

HP Pavilion p6000 - Desktop PC Mode d’emploi

HP

HP D2D100 Manuel utilisateur

HP

HP STORAGEWORKS XP24000 Manuel utilisateur

HP

HP C2488A Manuel du produit

HP

HP StoreEver MSL3040 Manuel

HP

HP P9000 Manuel utilisateur

HP

HP StorageWorks XP1024 Manuel utilisateur

HP

HP P2000 G3 Manuel utilisateur

HP

HP D6030A - NetServer - E50 Manuel utilisateur

HP

HP SureStore DAT40e Manuel utilisateur

HP

HP RDX REMOVABLE DL380 Instructions d'utilisation

HP

HP 800 Series Manuel utilisateur

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Mode d’emploi

HP

HP BL536A Manuel utilisateur

HP

HP D7171A - NetServer - LPr Manuel utilisateur

HP

HP StoreOnce B6000 Manuel utilisateur

HP

HP P9000 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur

HP StorageWorks D2D Backup System

release notes

Part number: EH880-90963

1st edition: February 2008

Description

This document outlines the functional changes and defect ﬁxesfortheHPStorageWorksD2DBackup

System introduced between ﬁrmware kn77 (001.395) and kn7B (001.559).

Update recommendation Recommended

Supersedes These release notes (part number EH880-90963) supersede those dated September 2007.

Product models

EH880A -- HP D2D110 Backup System

EH923A -- HP D2D110 Backup System with Data Protector Express SW Kit

EH884A -- HP D2D120 Backup System

EH924A -- HP D2D120 Backup System with Data Protector Express SW Kit

EH881A -- HP D2D110 Backup Sys/Ultr 448 Tape Drive

EH885A -- HP D2D120 Backup Sys/Ultr 920 Tape Drive

DW085A -- Ultrium 448 SAS Tape Drive for D2D110

EH847A -- Ultrium 920 SAS Tape Drive for D2D120

Operating systems

Cross operating system (BIOS, Firmware, Diagnostics, etc.)

Languages

Chinese (Simpliﬁed)

Chinese (Traditional)

English

French

German

Greek

Italian

Japanese

Korean

Polish

Portuguese

Russian

Spanish

Enhancements

•Increased maximum number of emulated target devices from four to six.

•Changed default emulation type for tape drive devices from Ultrium 2 to Ultrium 3.

•Added Ultrium 4 to tape attach support matrix.

•Included more error messages that generate email alerts.

HP StorageWorks D2D Backup System release notes 3

Fixes

•Firmware in attached tape drives can be updated.

Prerequisites

Requires Microsoft Internet Explorer 6.x or higher or Mozilla Firefox 1.5 or 2.x.

Installation instructions

NOTE:

During the update the HP D2D Backup System will reboot. After the update all conﬁguration settings

on the HP D2D Backup System will be retained.

1. Save the ﬁrmware image ﬁle on a server or PC that is connected to the same subnet as the HP

D2D Backup System.

2. From a Web Browser, launch the HP StorageWorks D2D Backup System Web Management Interface

by typing in the IP address of the HP D2D Backup System to be updated.

3. Ensure that there are no current or scheduled backup jobs that will occur during the ﬁrmware update

period, because the HP D2D Backup System will reboot during the update process.

4. Log in and navigate to the Firmware Page.

5. Select the Browse button in order to locate the ﬁrmware image on the host system.

6. Select Upload update the ﬁrmware.

NOTE:

Do NOT navigate away from the ﬁrmware page.

7. The LEDs on the HP D2D Backup System will ﬂash a ﬁrmware update pattern (alternate amber

and green).

8. After a few seconds the HP D2D Backup System will reboot, completion of the reboot is indicated by

all LEDs returning to current system status (generally all green).

9. Reconnect to the Web Management interface to observe that the upgrade has completed successfully.

10. Manually log back on to the HP D2D Backup System iSCSI targets via the iSCSI initiator from each

system. Use the HP D2D Backup System as a backup target. Alternatively, if targets have been made

persistent (restore automatically on reboot), simply reboot the host systems.

11 . To make use of new autoloader functionality any previously conﬁgured autoloaders should have

their emulation type changed to the new HP 1x8 G2 Autoloader emulation. To do this, use the

devices page from the web management interface.

Determining current version

From a Web Browser, launch the HP StorageWorks D2D Backup System Web Management Interface

by typing in the IP address of the HP D2D Backup System to be updated. Navigate to the Firmware

Pagewhich displays the current ﬁrmware version.

Effective date

February 11, 2008

4