HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manuel utilisateur

HPMSAFCVDSHardwareProviderquick

start guide

Part number: T1634-96073

Second edition: May 2006

Legal and notice information

Conﬁdential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and

12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are

licensed to the U.S. Government under vendor’s standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth

in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting

an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Intel, Itanium, Pentium, Intel Inside, and the Intel Inside logo are trademarks or registered trademarks of Intel Corporation or its

subsidiaries in the United States and other countries.

Microsoft, Windows, Windows XP, and Windows NT are U.S. registered trademarks of Microsoft Corporation.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

Java is a U.S. trademark of Sun Microsystems, Inc.

Oracle is a registered U.S. trademark of Oracle Corporation, Redwood City, California.

Linux is a U.S. registered trademark of Linus Torvalds.

UNIX is a registered trademark of The Open Group.

Printed in the U.S.

Contents

Conﬁgurationandinstallationsummary............................... 4

Components ........................................ 4

Hardwarecomponents.................................. 4

Softwarecomponents .................................. 5

HPMSAdiskarray(hostserveroptional):........................ 5

WindowsVDSProviderserver:............................. 5

Optionalcomponents .................................. 5

Conﬁgurationprocedures................................... 6

Conﬁgurationsummary.................................. 6

VDSProviderWindows2003server:.......................... 6

Diskarrayandhost:................................. 6

Important conﬁgurationnotes:............................. 6

Installationsummary..................................... 6

Removalsummary...................................... 7

UninstallingtheHPProviderusingWindows......................... 7

UninstallingusingtheHPProviderinstaller.......................... 7

HP MSA FC VDS Hardware Provider quick start guide 3

Conﬁguration and installation summary

This document summarizes the HP MSA FC VDS Hardware Provider components, conﬁguration, and

installation. For more detailed procedures, please refer to the HP Modular Smart Array FC VDS Hardware

Providers administration guide.

Components

The following hardware and software components are used with the HP Provider and an HP MSA disk

array. See the Read Me ﬁle and contact HP Support for HP tested and approved components.

Hardware components

•HP StorageWorks MSA1000/1500 Disk Array

•Windows 2003 Server: This server contains the Microsoft VDS Service and HP VDS Hardware

Provider.

•Fibre Channel Host bus adapter (HBA): Installs in the VDS Provider server to provide FC

connection to the MSA array. VDS supports only certain Emulex and Qlogic HBAs and the SCSI

Storport driver, not SCSI Miniport.

•Fibre Channel switch and cabling: For connecting the VDS Provider server to the array via fabric

SAN. Some arrays have a built-in switch.

4Conﬁguration and installation summary

Software components

IMPORTANT NOTE: The right combination of software versions is crucial to conﬁguring a working

system. RefertothetheREADMEﬁles accompanying the HP Provider installation ﬁles for information

about compatible software versions and system conﬁgurations. Follow all conﬁguration and installation

instructions carefully.

The following components and conﬁgurations enable you to use the HP MSA FC VDS Provider with the

MSA.

HP MSA disk array (host server optional):

•Conﬁgured as described in the following Conﬁguration procedures

Windows VDS Provider server:

•Windows 2003 Server

•HP MSA FC VDS Provider 4.00.00

•Microsoft QFEs (quick ﬁxes), if required for your OS or VDS, are listed in the HP Provider README

ﬁle. For more information, contact HP Support.

Optional components

•HP Basic MPIO software if multipathing is desired

•MSCS clustering (4–node clusters are supported)

HP MSA FC VDS Hardware Provider quick start guide 5

Conﬁguration procedures

Physically install and conﬁgure the disk array and the server as described below and in the manuals for

those products. Refer to the diagram under Components for an overview of interconnections.

Conﬁguration summary

You will perform the following tasks during conﬁguration:

VDS Provider Windows 2003 server:

•Install Windows 2003 Server OS.

•InstallFCHostBusAdapteranddriver.

•Connect the server HBA to the array using a FC switch and set up zoning (if required).

•Install NIC card and connect to Ethernet LAN (optional).

•Install HP MPIO software if multipathing is desired.

Disk array and host:

•Connect the array to the VDS Server through the FC switch.

•Verify existing or install MPIO software license.

Important conﬁguration notes:

Administrator privileges are required for all devices and software. If you do not have administrator

privileges, the software and hardware will not communicate properly.

When using the VDS framework to create and manage LUNs, the LUNs should be the same size as the

physical disk size. You can make LUNs smaller than a physical disk (or disks, if spanning multiple disks),

butanyspaceleftoveronthephysicaldisk(s)cannotbeused. Forexample,ifyouhavethree36

GB drives totalling 108 GB and you create a LUN of 20 GB spanning all three disks, the remaining

88 GB are unusable.

YoumayuseBasicMPIOwiththediskarrayandProviderserver,butyouwillnotbeabletouseVDSto

manage MPIO. Use whatever MPIO conﬁguration software you have available to manage MPIO.

Installation summary

You will perform the following tasks on the Windows server during installation:

•Remove the previous version of the Provider, if necessary.

•Run the Provider installation executable: setup.exe.

•Follow the InstallShield Wizard instructions to install the software.

•Install Microsoft QFEs (quick ﬁxes), if any. See the Provider README ﬁle for details.

•Verify installation using Windows Disk Management and the DISKRAID List Provider command.

6Conﬁguration and installation summary

Removal summary

Before removing the HP VDS Provider, issue a net stop command from the command line, as shown below:

net stop vds

Uninstalling the HP Provider using Windows

1. In Windows, select Start >Settings >Control Panel.

2. Double-click Add/Remove Programs.

3. Select the HP MSA VDS Hardware Provider program for removal.

4. Click Change/Remove. Windows removes the program.

Uninstalling using the HP Provider installer

You can also uninstall the HP Provider by starting the Provider installer again. Removal follows the same

steps as installation. When the Remove Program window appears, click the Remove button, and then

click Finish when removal is complete.

HP MSA FC VDS Hardware Provider quick start guide 7

Autres manuels pour 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard...

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Matériel réseau

HP IBRIX X9720 Manuel de service

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manuel de programmation

HP 634041-006 Guide de référence rapide

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Manuel utilisateur

HP 5900AF-48XG-4QSFP+ Instructions de montage

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Comment utiliser

HP StorageWorks HA-Fabric Manager Manuel utilisateur

HP c-Class Guide d'installation

HP MSR954 Series Instructions de montage

HP SL500 (M852x) Manuel utilisateur

HP 82713A Manuel utilisateur

HP FF 12910 Instructions de montage

HP Enterprise Aruba 7210 Instructions de montage

HP Compaq NC6133 Instructions d'utilisation

HP J9666A Manuel utilisateur

HP ProCurve Networking J8451A Manuel utilisateur

HP StorageWorks AB466A Manuel utilisateur

HP 800 Series Manuel utilisateur

HP 12500 Series Manuel utilisateur

HP E-MSM466-R Instructions de montage

HP ProCurve Radio Port 230 Instructions de montage

HP MSA 2040 Manuel utilisateur

HP In/Out P2P 10/13dBi MIMO 3 Instructions de montage

HP X5000 G2 Manuel de service

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur