Hover-1 PRO Series Manuel utilisateur

DGL Group

2045 Lincoln Highway

Edison, NJ 08817

support@hover-1.com | hover-1.com

BOSS

Owner’s Manual

Assembly & Maintenance

HOVER-1

PRO SERIES

DGL Group

2045 Lincoln Highway

Edison, NJ 08817, United States

hover1rideables

hover-1

ridehover1

hover1rideables

@ridehover1

Join our Hover−1 Community

of riders wherever you are!

support@hover-1.com

866.831.1520

www.hover-1.com

Thank you for choosing the Hover-1 Boss. It is our pleasure to guide you through

setting up your Boss and hitting the road!

Please read through this Owner’s Manual to get familiar with the proper

operation of your Boss E-Scooter’s controls, features, capabilities, and

limitations.

This manual will be your guide for general maintenance, safety precautions,

assembly, and servicing of the unit.

Before riding your Boss E-Scooter, be sure all the parts are properly torqued,

tightened, and connected (particularly the parts that had to be manually

installed). Remember to always use your best judgment and obey all traffic

laws.

Additional instructions and media will be available to assist you with repairs or

maintenance of your Hover-1 Pro Series E-Scooter.

CONTENTS 05. BASICS

Diagram of the Boss

General Symbols

Safety Advice

13. ASSEMBLY & PARTS

09. SAFETY PRECAUTIONS

Setting Up Your EScooter

25. OPERATIONS

Before Riding

Pre-Ride Checklist

Speed Modes

Cruise Control

Kick to Start

Riding Your Boss EScooter

Operating Your Device

Speed & Weight Limitations

Operating Range

Hover-1 EMobility App

LED Display

Error Codes

Safety Precautions19

33. MAINTENANCE

Battery Speciications

Battery Maintenance

Charging Your Boss

Speciications

17. SAFETY CHECKLIST

38. FCC STATEMENT

39. WARRANTY

03 04

DIAGRAM OF THE BOSS

Brake Lever (R)

Headlight

Rear Fender

BASICS01

Taillight

Disc BrakeMotor

Folding Hinge Front Shocks Kickstand

Foot Deck

Folding Hook

LED Display Handlebar

Brake Lever/Bell (L)

Thumb Throttle

05 06

GENERAL SYMBOLS

SAFETY ADVICE

WARNING

NOTICE

DANGER

Recommendations and meaningful additional information.

Warns about a situation that can cause death, serious physical injury and/or

heavy material damage if safety instructions are ignored.

Possible dangers to your life and health if respective calls to action are ignored.

Please adhere to the following safety instructions while operating your Boss:

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR ELECTRIC

SHOCK - IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using this product, basic precautions should always be

followed, including the following:

Read all the instructions before using the product.

To reduce the risk of injury, close supervision is necessary when the product is

used near children.

Do not put fingers or hands into the product.

Do not use this product if the flexible power cord or output cable is frayed, has

broken insulation, or any other signs of damage.

This equipment is not intended to be used at ambient temperatures less than

0°C (32°F) or above ambient temperatures of 30°C (86°F).

The battery is intended to be charged when the ambient temperature is

between 0°C (32°F) and 30°C (86°F). Never charge the battery when ambient

temperatures are outside this range.

Modifying or attempting to repair the E-Scooter system except as indicated in

the instructions for use and care is prohibited.

Charging of the E-Scooter shall only be performed with the manufacturer's

recommended charger.

SAVE THESE INSTRUCTIONS

Always wear a properly fitted helmet and protective gear while riding.

See and be seen. Wear reflective clothing while riding at night.

Learn the rules of the road before riding. Obey all traffic laws.

Make sure handlebar grips are not damaged and are properly installed.

Always check brakes before riding.

Check for traffic. Always be aware of the traffic around you.

Watch for and avoid road hazards.

Reduce speed when riding on wet terrain.

To prevent skidding or potential injuries, do not accelerate or brake

suddenly while making turns.

To avoid water damage, do not leave your E-Scooter in inclement weather.

When activating pedal assist, increase speed slowly to avoid injury.

Do not use and/or leave the charger outdoors in hot or wet weather conditions.

Do not ride up or down extremely steep inclines.

Do not touch the body of the motor immediately after riding, as the surface

may be hot.

Do not make any aftermarket modifications to your Boss that are not expressly

approved by Hover-1 Pro Series.

Do not ride the E-Scooter if you exceed the maximum weight limit of 264 lbs.

•

07 08

SAFETY PRECAUTIONS02

ATTENTION

1. Use only the supplied charger from Hover-1 with this E-Scooter.

2. The operating temperature range of the charger is 32°F - 86°F

(0°C - 30°C).

3. The operating temperature range of the Boss is 32°F - 86°F

(0°C - 30°C).

4. Do not ride on icy or slippery surfaces.

5. Read the operation manual and warning labels before riding.

6. Store the Boss in a dry, ventilated environment.

7. When transporting the Boss, avoid violent crashes or impact.

LOW TEMPERATURE WARNING

Low temperatures will affect the lubrication of moving parts inside the Boss,

increasing internal resistance. Additonally, the discharge capacity and capacity of

the battery will be significantly decreased.

Use caution when riding the Boss in cold temperatures (below 40°F/4°C). Doing

so may increase the risk of mechanical failures of the E-Scooter, which may lead

to damage to your device, property damage, serious bodily injury, and even

death.

SAFETY INSTRUCTIONS

Keep the E-Scooter away from heat sources, direct sunlight, humidity, water, and

any other liquids.

Do not operate the E-Scooter if it has been exposed to water, moisture, or any

other liquids to prevent electric shock, explosion, and/or injury to yourself and

damage to the E-Scooter.

Do not use the E-Scooter if it has been dropped or damaged in any way.

Repairs to electrical equipment should only be performed by the manufacturer.

Improper repairs void the warranty and may place the user at serious risk.

Do not puncture or harm the exterior surface of the E-Scooter in any way.

Keep the device free from dust, lint, etc.

Do not use this E-Scooter for anything other than its intended use or purpose.

Doing so may damage the E-Scooter or lead to property damage, injury, or

death.

This product is not a toy. Keep out of reach of children.

Do not expose the batteries to excessive heat such as direct sunlight or an open

flame.

PLEASE READ THE OPERATION MANUAL THOROUGHLY.

Failure to follow the basic instructions and safety precautions listed in the

operation manual can lead to damage to your Boss, property damage,

serious bodily injury, and even death.

Thank you for purchasing the Hover-1 Boss. Please read all instructions carefully

before using it and retain this manual for future reference.

To avoid collisions, falls, and loss of control, please learn how to ride the Boss

safely.

You can learn how to ride the Boss by reading the operation manual and

watching videos.

All users are responsible for any consequences caused by violating warning

contents or proper operations. Hover-1 can not be held liable.

•

09 10

When you ride in low-visibility conditions such as fog, dusk, or night, you

might be difficult to see, which could lead to a collision. To increase your

level of safety, be sure wear bright, reflective clothing when riding in poor

lighting conditions.

As with all mechanical components, the Hover-1 Boss is subjected to wear and

high stresses. Different materials and components may react to wear or

fatigue in different ways. If the design life of a component has been

exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form

of crack, scratch, or change of coloring in highly stressed areas indicate that

the life of the component has been reached and it should be replaced. Do not

ride in an abusive manner.

Great care should be taken with the Hover-1 Boss when folding or unfolding it.

Moving and folding parts can cut skin or pinch if mishandled.

DO NOT RIDE YOUR HOVER-1 BOSS WITHOUT ALL RELEASES SECURELY

LOCKED.

WARNING

Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in

contact with moving parts, wheels, or the drivetrain while the Boss is running.

Do not operate or allow others to operate the Boss until the user understands all

instructions, warnings, and safety features described in this manual.

Check with your doctor if you have a medical condition that could affect your

ability to use the Boss.

Persons with head, back, neck ailments, or prior surgeries

to those areas of the body are not recommended to use

the Boss.

Do not operate if you are pregnant or have a heart condition.

Persons with any mental or physical conditions that may make them susceptible

to injury or impair their physical or mental capabilities to recognize, understand,

and perform all of the safety instructions and assume the hazards inherent in

operation should not use the Boss.

•

11 12

WARNING

DANGER

NOTICE

Parts List

ASSEMBLY & PARTS03

Before performing any work on your Boss, be sure the power is OFF.

Be sure the package is upright when opening. Open from the top.

All riders of the E-Scooter should follow these safety instructions.

Please read all assembly instructions in full before beginning to

assemble your new E-Scooter.

Visually examine your shipping box and E-Scooter to ensure that everything

arrived without shipping issues. Take pictures if you suspect rough handling and

contact: support@hover-1.com

If you require additional assistance, please reach out to support@hover-1.com

for more information. We often update user guides based on the feedback we

receive from our customers.

•

A. Boss E-Scooter

B. Handlebar Assembly

C. Charger + Charging Cable

D. Hex Keys (2) & M5 Screws (8)

13 14

Attach the handlebar assembly by placing it into the steering column. Align

the front and back screw holes, and tighten the 4 screws into place using

the hex keys provided.

SETTING UP YOUR ESCOOTER

Attaching the Handlebar Assembly

To fold your Boss, push the folding hinge release button up and pull the

folding hinge down. Push the steering column down to the rear fender.

Align the folding hook with the slot in the rear fender and push the folding

hook into it to lock the Boss in a folded position.

To unfold your Boss, push the rear fender down to unlock the folding hook.

Raise the steering column until it is pointing straight up. Pull the folding

hinge up and press it against the steering column to ensure it is securely

locked.

Folding & Unfolding Your EScooter

Some parts of your Hover-1 Boss can injure you if mishandled.

Moving and folding parts can cut skin. Clamps and pivoting parts such as

brake levers can pinch. When folding and unfolding your Hover-1 Boss,

Please watch for pinch points where injury may be sustained. Do not leave

your hand in these areas while folding or unfolding.

Pinch Points

FOLDING

HINGE

PUSH BUTTON

ON HINGE UP

RELEASE FOLDING HINGE

TO FOLD STEERING COLUMN

15 16

Please be sure all the items you installed are properly torqued, tightened, and

connected! If you have any questions, please contact us: support@hover-1.com

Tire wear and tear depends on several factors, such as the weight of the rider

and type of terrain.

Follow battery charging and maintenance instructions.

Check that the battery is inserted securely.

Check that the battery is fully charged.

Pull both brake levers. You should feel an obvious pressure and the levers

should not be able to touch the handlebar.

4. Brakes system

Check if the headlight and taillight are working properly.

5. Lighting

Check if your display turns on and functions properly.

7. Display

Check if the kickstand is tightly secure, not rubbing

against the ground or tires.

8. Kickstand

NOTICE

Do not cover any lighting ixtures or relectors.

Do not sit on the E-Scooter if the kickstand is engaged.

WARNING

NOTICE

SAFETY CHECKLIST03

3. Battery

4. Brakes system

5. Lighting

NOTICE

SAFETY CHECKLIST04

To be sure your E-Scooter is safe on the road, please use the following checklist

before your first ride:

Check that the handlebars are tight by applying the front brake and pushing

the handlebars forward and back.

1. Handlebars

Check the condition of the tires. Check the tire treads for cracks,

punctures, and deformations.

1. Handlebars

2. Tires

17 18

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hover-1 Scooter

Hover-1

Hover-1 DREAM Manuel utilisateur

Hover-1

Hover-1 Gambit Manuel utilisateur

Hover-1

Hover-1 EDGE 2.0 Manuel utilisateur

Hover-1

Hover-1 Beast Buggy Manuel utilisateur

Hover-1

Hover-1 HIGHLANDER Manuel utilisateur

Hover-1

Hover-1 H1-MFEB Manuel utilisateur

Hover-1

Hover-1 HELIOS Manuel utilisateur

Hover-1

Hover-1 Pro Series ACE R350 Manuel utilisateur

Hover-1

Hover-1 AVIATOR Manuel utilisateur

Hover-1

Hover-1 HORIZON HY-H2L Manuel utilisateur

Hover-1

Hover-1 ROCKET 2.0 Manuel utilisateur

Hover-1

Hover-1 FLEX Manuel utilisateur

Hover-1

Hover-1 All-Star Manuel utilisateur

Hover-1

Hover-1 ALPHA-PRO Manuel utilisateur

Hover-1

Hover-1 MY FIRST E-SCOOTER Manuel utilisateur

Hover-1

Hover-1 RENEGADE Manuel utilisateur

Hover-1

Hover-1 Liberty Manuel utilisateur

Hover-1

Hover-1 All-Star Manuel utilisateur

Hover-1

Hover-1 BLACKHAWK Manuel utilisateur

Hover-1

Hover-1 COMET EU-H1-COMT Instructions de fonctionnement

Hover-1

Hover-1 MY FIRST E-BIKE Manuel utilisateur

Hover-1

Hover-1 TURBO Manuel utilisateur

Hover-1

Hover-1 RIDER Manuel utilisateur

Hover-1

Hover-1 ALPHA-PRO Manuel utilisateur

Manuels Scooter populaires d'autres marques

TEKTRO

TEKTRO CHEETAH Manuel utilisateur

Douglas

Douglas Vespa Sprint Guide d'installation

PLAYTIVE

PLAYTIVE AS-2448 Manuel utilisateur

Ebinger

Ebinger DONKEY XL Manuel utilisateur

Flyer

Flyer Mountain Guide de l'utilisateur

BackCountry eBikes

BackCountry eBikes Storm Manuel utilisateur

equipmed

equipmed FreeRoam II Manuel utilisateur

Yoto

Yoto Lion Manuel utilisateur

WESTHILL BIKES

WESTHILL BIKES LINK Manuel utilisateur

BAnff

BAnff eProdigy series Manuel utilisateur

Winther

Winther 475 Manuel utilisateur

Jetson

Jetson JBZL17 Manuel utilisateur

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera

Carrera impel Manuel utilisateur

Afikim

Afikim Superlight SL-3 Manuel utilisateur

CareCo

CareCo ZOOM Manuel utilisateur

Douglas

Douglas Vespa G.S. Manuel utilisateur

Gazelle

Gazelle with BOSCH System Manuel utilisateur