Hover-1 Go-Kart Manuel utilisateur

ELECTRIC SCOOTER ACCESSORY

GO-KART

Operation Manual HY-ALL-CMB Go-Kart

*Images used in this manual may vary slightly from

the product and are for reference purposes only.

IMPORTANT: KEEP FOR FUTURE REFERENCE

Even if you have ridden a scooter for years, it is important for you

and every rider to read this manual before using this product.

ELECTRIC SCOOTER ACCESSORY

GO-KART

HELMETS SAVE LIVES!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you

ride your scooter.

WARNING

Correct Fitting:

Make sure your helmet

covers your forehead.

Incorrect Fitting:

Forehead is exposed and

vulnerable to serious injury.

This manual is designed to give you the information you need for the safe operation and maintenance of

your new Hover-1 Go-Kart. Please read it thoroughly before riding your Hover-1 Go-Kart.

• Section One of this manual involves safety and Hover-1 Go-Kart care. Understanding and following this

Information will help you and your Hover-1 Go-Kart avoid injury or damage.

• Section Two of this manual gives assembly and installation instructions for your Hover-1 Go-Kart.

• Section Three of this manual covers specific safety and operating instructions for your Hover-1 Go-Kart. Even

if you are an experienced rider, you should review this section before your first ride.

• Section Four of this manual covers warranty specifications of your Hover-1 Kart.

INTRODUCTION

WARNING

Make sure you read this complete manual before riding

your Hover-1 Go-Kart. Failure to do so, or failure to follow

its guidelines could lead to serious injury or death.

HOVER-1 GO-KART DIAGRAM

SPECIFICATIONS

1. Adjustable Seat

2. Handle Bars

3. Pedal Mounts

4. Elastic Strap

5. Seat Frame

6. Twist Knob

7. Frame Extension

8. Foot Rests

9. Caster Wheel

10. Flag

Compatibility: Most 6.5” scooters

Max Load: See max load of your scooter

Tire Size: 4” swivel caster

Seat Material: PP

PARTS LIST

(1) Seat Base

(1) Seat Frame

(1) Frame extension

(1) Seat Back Frame

(1) Left Handle Bar

(1) Right Handle Bar

(2) Elastic strap

(4) Spare Elastic straps

(2) Twist Knob

Allen Wrench Set:

(2) 5mm wheel change

(1)

6mm seat frame assembly

(2) Large Screws

(6) Small Screws

(2) Large Washers

(1) Flag Set

(1) Seat Back

ASSEMBLING YOUR HOVER-1 GO-KART

If you have questions or concerns about any of these steps, please feel free to contact our Customer Service

Team at www.hover-1.com. Someone will be in touch to walk you through these steps.

Carefully follow the steps shown on the following pages for assembling the Hover-1 Go-Kart.

Remove all Hover-1 Go-Kart contents from the box. Ensure all contents from the “Parts List” section are

accounted for.

1. Using the two large screws and two large washers. Attach the handle bars to the appropriate sides of the

seat frame as shown below. Tighten with included 6mm Allen wrench.

2. Align the holes of the seat with the seat frame. Secure the seat in place using the included Allen wrench,

four small screws.

3. Insert the frame extension into the seat frame. Adjust to preferred length. Secure the frame extension in place

using one twist knob.

4. Align the holes of the seat back with the seat

back frame. Secure the seat back in place using the

included Allen wrench and two small screws.

6. Your Hover-1 Go-Kart is now completely assembled

and should look like the below image.

5. Insert the seat back frame into the seat frame.

Adjust to preferred length. Secure the seat back frame

in place using one twist knob.

Table des matières

Autres manuels Hover-1 Scooter

Hover-1

Hover-1 EDGE 2.0 Manuel utilisateur

Hover-1

Hover-1 H1 Manuel utilisateur

Hover-1

Hover-1 NOVA Manuel utilisateur

Hover-1

Hover-1 Liberty Manuel utilisateur

Hover-1

Hover-1 Buggy Manuel utilisateur

Hover-1

Hover-1 Journey H1-JNY Manuel utilisateur

Hover-1

Hover-1 FLEX Manuel utilisateur

Hover-1

Hover-1 INSTINCT H1-EGBR Manuel utilisateur

Hover-1

Hover-1 DREAM Manuel utilisateur

Hover-1

Hover-1 BLACKHAWK Manuel utilisateur

Hover-1

Hover-1 TURBO Manuel utilisateur

Hover-1

Hover-1 ESCAPE Manuel utilisateur

Hover-1

Hover-1 FADE Manuel utilisateur

Hover-1

Hover-1 Pro Series ACE R350 Manuel utilisateur

Hover-1

Hover-1 Beast Buggy Manuel utilisateur

Hover-1

Hover-1 AVIATOR Manuel utilisateur

Hover-1

Hover-1 Gambit Manuel utilisateur

Hover-1

Hover-1 HY-H1 Manuel utilisateur

Hover-1

Hover-1 ALPHA-PRO Manuel utilisateur

Hover-1

Hover-1 All-Star Manuel utilisateur

Hover-1

Hover-1 PRO Series Manuel utilisateur

Hover-1

Hover-1 ROCKET 2.0 Manuel utilisateur

Hover-1

Hover-1 MY FIRST E-BIKE Manuel utilisateur

Hover-1

Hover-1 HELIOS Manuel utilisateur

Manuels Scooter populaires d'autres marques

TEKTRO

TEKTRO CHEETAH Manuel utilisateur

Douglas

Douglas Vespa Sprint Guide d'installation

PLAYTIVE

PLAYTIVE AS-2448 Manuel utilisateur

Ebinger

Ebinger DONKEY XL Manuel utilisateur

Flyer

Flyer Mountain Guide de l'utilisateur

BackCountry eBikes

BackCountry eBikes Storm Manuel utilisateur

equipmed

equipmed FreeRoam II Manuel utilisateur

Yoto

Yoto Lion Manuel utilisateur

WESTHILL BIKES

WESTHILL BIKES LINK Manuel utilisateur

BAnff

BAnff eProdigy series Manuel utilisateur

Winther

Winther 475 Manuel utilisateur

Jetson

Jetson JBZL17 Manuel utilisateur

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manuel utilisateur

Carrera

Carrera impel Manuel utilisateur

Afikim

Afikim Superlight SL-3 Manuel utilisateur

CareCo

CareCo ZOOM Manuel utilisateur

Douglas

Douglas Vespa G.S. Manuel utilisateur

Gazelle

Gazelle with BOSCH System Manuel utilisateur