Honeywell Dolphin 99 EX Manuel utilisateur
Dolphin™99EX
with Windows
®
Embedded Handheld 6.5
Quick Start Guide
99EX_QS.book Page 1 Friday, March 4, 2011 2:42 PM
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to
make changes in specifications and other information
contained in this document without prior notice, and the
reader should in all cases consult Honeywell to determine
whether any such changes have been made. The
information in this publication does not represent a
commitment on the part of HII.
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing,
performance, or use of this material.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of
this document may be photocopied, reproduced, or
translated into another language without the prior written
consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Dolphin and HomeBase are trademarks or registered
trademarks of Hand Held Products, Inc. or Honeywell
International Inc. Microsoft, Windows, Windows Mobile,
Windows Embedded Handheld, Windows 7, Windows Vista,
Windows XP, Windows Mobile Device Center, ActiveSync,
and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation. Other product names
or marks mentioned in this document may be trademarks or
registered trademarks of other companies and are the
property of their respective owners.
©2011 Honeywell International Inc. All rights reserved.
99EX_QS.book Page 2 Friday, March 4, 2011 2:42 PM
1
Out of the Box
Verify that the carton contains the following items:
• Dolphin 99EX mobile computer (the terminal)
• Main battery pack (i.e., standard 3.7V Li-poly or
extended 3.7V Li-ion)
• Quick Start Guide
Note: If you ordered accessories for your terminals, verify that they
are also included with the order.
Be sure to keep the original packaging in the event that the
Dolphin terminal should need to be returned for service.
Front Panel
Power Key
Front Speaker
Navigation Keys
Microphone
I/O Connector
General
Notification
LED
Touch Panel Display
Volume
Button
Right Button
Scan Key
Charge Indicator LED
99EX_QS.book Page 1 Friday, March 4, 2011 2:42 PM
2
Back Panel
Left Button
IRDA Port
Battery Door
Stylus Fastener
Hand
Strap
Stylus
Slot
Protective
SIM/Memory
CardDoor
Rear Speaker
Flashlight/
Camera Flash
Color Camera
Image/Scan
Engine Window
Battery Well
Battery Door Release
T6Torque
Screw
Hand Strap
Hook
Note: Your Dolphin model may differ from the model illustrated
above; however, the features noted are standard for all
99EX models.
99EX_QS.book Page 2 Friday, March 4, 2011 2:42 PM
3
Available Keyboards
1
SCAN
VOL
PG
TAB
ESC
SEND END
ENT
☼
3
456
7
.
+-/\
;—
:
0,#
*@
89
DEF
GHI JKL MNO
PQRS TU V WXYZ
F1
F5 F2
F6 F3
F7 F4
F8
SFT SP BKSP DEL
ALT
CTRL ALPHA
2ABC
7
SCAN
VOL PG
TAB
ESC
SEND END
ENT
☼
9
456
1
.
+-/\
;:—
0,#
@
*
23
F1
F5 F2
F6 F3
F7 F4
F8
SFT SP BKSP DEL
ALT
CTRL ALPHA
8DEF
GHI JKL MNO
PQRS TU V WXYZ
ABC
34-Key Numeric
(Calculator) Keyboard
34-Key Alpha/Numeric
Keyboard
99EX_QS.book Page 3 Friday, March 4, 2011 2:42 PM
4
ALT
CTRL
NUM
AB C D E
F G H I J
K L M N O
P Q R S T
UVWX Y
Z
1
+
@
#
*
F1 F2 F3 F4 F5
F6 F7 F8 F9 F10
F15F14F13F12F11
F17 F18 F19 F20F16
F21 F22 F23 F24 F25
23
456
789
.0
SFT SP
BKSP
,
SCAN
VOL PG
TAB
ESC
SEND END
ENT
☼
ALT
CTRL
A
123
456
789
0
BCDE
FGH IJ
KL MNO
PQRST
UV WX Y
Z
SFT
#
!
?
;
@
$&
—
~`
.
,
*
F6 F7 F8 F9 F10
F15F14F13F12F11
F17 F18 F19 F20F16
F21 F22 F23 F24 F25
BKSP
SP
DEL
+
-()
=
:
‘
SCAN
VOL PG
TAB
ESC
ENT
☼
F1 F2 F3 F4 F5
55-Key Full Alpha/
Numeric Keyboard
43-Key Alpha/Numeric
Keyboard
99EX_QS.book Page 4 Friday, March 4, 2011 2:42 PM
5
Install the Main Battery Pack
The 99EX is shipped with the battery packaged separate
from the unit. Follow the steps below to install the main
battery. For information on how to remove the battery, see
page 6.
1. Release the hook securing the hand strap to the back
panel of the terminal.
2. Remove the battery door by lifting up the latches near
the base of the battery door.
3. Insert the battery into the battery well.
4. Replace the battery door. Apply pressure to engage
the door latch. The battery door must be installed
prior to powering the unit.
5. Reattach the hand strap.
6. Connect the terminal to one of the 99EX series
charging peripherals to charge the main battery pack.
We recommend use of Honeywell Li-poly or Li-ion
battery packs. Use of any non-Honeywell battery may
result in damage not covered by the warranty.
2
3
!
99EX_QS.book Page 5 Friday, March 4, 2011 2:42 PM
6
Removing the Main Battery Pack
When removing a battery from the terminal, put the device
in Suspend Mode (see page 7) before removing the
battery door. Once the battery door is removed, wait at
least 3 seconds before removing the main battery. This
process allows the device to shut down properly and
maintains memory during the battery swap.
Battery Error Notification
If your terminal displays the following indicators, replace
the battery with a Honeywell Li-poly or Li-ion battery pack.
• appears in the Title bar at the top of the touch panel
display.
• The General Notification LED flashes red.
• A Notification appears on the Tile bar at the bottom of
the touch panel display.
99EX_QS.book Page 6 Friday, March 4, 2011 2:42 PM
7
Suspend Mode
The terminal goes into Suspend Mode automatically when
the terminal is inactive for a programmed period of time.
You can program this time on the Advance tab of the
Power System Setting. For additional information, refer to
the
Dolphin 99EX User’s Guide
located on the Web at
www.honeywellaidc.com.
To put the terminal into Suspend Mode manually, press
the Power key and the screen goes blank.
To wake the terminal from Suspend Mode, press the
Power key or SCAN key .
Note: You should always put the terminal in suspend mode before
removing the battery door. For information on how to
remove the battery see page 6.
SCAN
99EX_QS.book Page 7 Friday, March 4, 2011 2:42 PM
8
Charging the Dolphin
Connect the terminal to one of the
99EX series charging peripherals
to charge the main battery.
The charging time for the main
battery pack is 4 hours for the
standard 3.7V battery or 6 hours
for the extended battery.
Honeywell recommends charging
the Dolphin terminal for at least
24 hours prior to initial use to
ensure the internal backup battery
is fully charged.
HomeBase
Front Panel
Back Panel
AUX
Battery
Well
HomeBase
Power/Dock
LED
AUX Battery LED
COMM
LED
USB Port
Serial Port DC Power
Jack
99EX_QS.book Page 8 Friday, March 4, 2011 2:42 PM
Autres manuels pour Dolphin 99 EX
3
Table des matières
Autres manuels Honeywell portable
Honeywell
Honeywell ScanPal EDA51 Manuel utilisateur
Honeywell
Honeywell ScanPal EDA51 Manuel utilisateur
Honeywell
Honeywell HX3 Manuel utilisateur
Honeywell
Honeywell Dolphin 6110 Manuel utilisateur
Honeywell
Honeywell CN70 Series Manuel utilisateur
Honeywell
Honeywell Dolphin 75e Manuel utilisateur
Honeywell
Honeywell Dolphin CT40XP Manuel utilisateur
Honeywell
Honeywell Dolphin CT60 Manuel utilisateur
Honeywell
Honeywell Dolphin 60s Manuel du propriétaire
Honeywell
Honeywell CT50 Manuel utilisateur
Honeywell
Honeywell Dolphin 7600 Manuel utilisateur
Honeywell
Honeywell MX9 Manuel utilisateur
Honeywell
Honeywell CT50 Manuel utilisateur
Honeywell
Honeywell 8680i Series Manuel utilisateur
Honeywell
Honeywell HX3 Manuel utilisateur
Honeywell
Honeywell DOLPHIN 6500 Manuel utilisateur
Honeywell
Honeywell CT50 Manuel utilisateur
Honeywell
Honeywell Dolphin 60s Manuel utilisateur
Honeywell
Honeywell Dolphin CT60 Manuel utilisateur
Honeywell
Honeywell Dolphin 75e Manuel utilisateur
