Honeywell CN75 Manuel utilisateur

CN75/CN75e NI

with Windows®Embedded Handheld 6.5

Quick Start Guide

CN75NI-W65-EN-QS-0 Rev A

5/17

Introduction

This document is for the CN75/CN75e NI. This is the

non-incendive version of the CN75/CN75e. The CN75/CN75e

NI can be identified by the device label verifying non-incendive

certification.

Out of Box

Make sure that your shipping box contains these items:

• CN75/CN75e NI mobile computer

(Model CN75LAN or CN75WAN)

• Rechargeable 3.7 V, Lithium-ion battery

•I/OCover

• Product Documentation

If you ordered accessories for your mobile computer, verify that

they are also included with the order. Be sure to keep the original

packaging in case you need to return the mobile computer for

service.

Note: CN75LAN models do not include a WWAN radio.

Memory Card Specifications

Honeywell recommends the use of Single Level Cell (SLC)

industrial grade microSD™ memory cards with the computer for

maximum performance and durability. Contact a Honeywell

sales representative for additional information on qualified

memory card options.

Warning: Explosion Hazard -Substitution of

components may impair suitability for Division 2 Class

I, II, III locations.

Avertissement: Risque d’ explosion - Le remplacement

de composants risque de compromettre l’adaptation

du produit aux sites de division 2 catégorie I,II,III.

Computer Features

Note: Hand strap not shown.

Notification LED

Scan Button

Microphone

Power Button

Battery Status

LED

Good Read LED

Speaker

Touch Panel

Volume Buttons

I/O Cover

Side Scan

Button

Speaker Port

Battery

Camera

Imager

(LED/Laser Aperture)

Laser Safety

Label Location

Application

Button

Battery Latch

SIM/microSD Card

Socket

(Located Under Battery)

Screws

Detach Hand Strap

Detach the hand strap to access to the back of the computer.

Note: Battery pack shown installed. To learn more, see “Install the

Battery”.

Install a microSD Card

Note: Format the microSD card before initial use.

Note: Always place the computer in hibernate mode and

remove the battery before attempting to install or

remove a card.

Install a SIM Card

Note: Always place the computer in hibernate mode and

remove the battery before attempting to install or

remove a card.

Install the Battery

The CN75/CN75e NI mobile computer ships with a Lithium-ion

3.7 V, 4000 mAH (14.8 Wh) battery manufactured for Honeywell

International Inc.

We recommend use of Honeywell Li-ion battery packs.

Use of any non-Honeywell battery may result in

damage not covered by the warranty.

Ensure all components are dry prior to placing the

battery in the computer. Mating wet components may

cause damage not covered by the warranty.

Charge the Computer

The CN75/CN75e NI mobile computer ships with a partially

charged battery. Charge the battery with a 70 Series charging

device for a minimum of 6 hours.

Using the computer while charging the battery increases the

time required to reach a full charge. If the CN75/CN75e is

drawing more current than supplied by the charging source,

charging will not take place. For additional information, see the

user guide.

CN75/CN75e NI mobile computers are designed for use with

the following charging accessories: DX1 Desktop Dock, DX2

Dual Dock, and DX4 Quad Dock and a power supply.

Warning: Explosion Hazard - Batteries must only be

changed or charged in an area known to be

non-hazardous. Use ONLY Honeywell CN75 NI battery

part number 1000AB02.

Risqued’explosion-Les batteries doivent uniquement

être remplacées ou rechargées dans un endroit non

dangereux. Utilisez UNIQUEMENT Honeywell CN75 NI

batterie P/N 1000AB02

We recommend the use of Honeywell peripherals,

power cables and power adapters. Use of any non-

Honeywell accessories or power adapters may cause

damage not covered by the warranty.

Ensure all components are dry prior to mating the

computers and batteries with peripheral devices.

Mating wet components may cause damage not

covered by the warranty.

Install the I/O Cover

Remove the I/O Cover

The I/O cover must be attached when using the

CN75/CN75e NI in a dangerous environment.

Avertissement : Le couvercle entrée-sortie doit être

fi xé lorsque le CN75/CN75e NI est utilisé dans un

environnement incendiaire.

1 2

Autres manuels pour CN75

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell portable

Honeywell

Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin... Manuel utilisateur

Honeywell

Honeywell 7900L0P-422C20E - Hand Held Products Dolphin... Manuel utilisateur

Honeywell

Honeywell Dolphin CT60 Manuel utilisateur

Honeywell

Honeywell Dolphin 70e Black Manuel utilisateur

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell CT50 Manuel utilisateur

Honeywell

Honeywell Dolphin 7900 Manuel utilisateur

Honeywell

Honeywell Dolphin 99EXLG Series Manuel utilisateur

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuel utilisateur

Honeywell

Honeywell MX9 Manuel utilisateur

Honeywell

Honeywell ScanPal EDA51K Manuel utilisateur

Honeywell

Honeywell DOLPHIN 6100 Manuel utilisateur

Honeywell

Honeywell Dolphin 9700 Manuel utilisateur

Honeywell

Honeywell HX2 Manuel utilisateur

Honeywell

Honeywell MX9 Manuel utilisateur

Honeywell

Honeywell Dolphin 6110 Manuel utilisateur

Honeywell

Honeywell GMPT-401-C1D2 Manuel utilisateur

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuel utilisateur

Honeywell

Honeywell MX9 Manuel utilisateur

Honeywell

Honeywell CK65 Series Manuel utilisateur

Honeywell

Honeywell Dolphin 60s Manuel du propriétaire

Honeywell

Honeywell MX8 Manuel utilisateur

Honeywell

Honeywell MX9 Manuel utilisateur

Manuels portable populaires d'autres marques

MiTAC

MiTAC Mio 168 Manuel utilisateur

Wasp

Wasp WDT92 Manuel utilisateur

Texas Instruments

Texas Instruments TI-Nspire Manuel utilisateur

AXEM Technology

AXEM Technology MBS Manuel utilisateur

Armstrong

Armstrong Brain Wave Instructions de montage

Unitech

Unitech TB128 Manuel utilisateur

Symbol

Symbol MC9000-G Manuel d'installation et d'exploitation

Unitech

Unitech HT1 1D Batch Manuel utilisateur

Ingenico

Ingenico IWL220 GPRS Manuel utilisateur

Intermec

Intermec CK61 Manuel utilisateur

Symbol

Symbol c2000 Manuel utilisateur

Symbol

Symbol MC18 Manuel d'installation et d'exploitation

Acer

Acer n20 Manuel utilisateur

Intermec

Intermec CK61 Manuel utilisateur

Docomo

Docomo F-04H Manuel utilisateur

Toshiba

Toshiba e350 Series Manuel utilisateur

Palm

Palm Tungsten E2 Manuel

Alien

Alien ALR-H460 Manuel utilisateur