Honeywell 8680i Series Manuel utilisateur

8680i

Wearable Scanner

Quick Start Guide

8680-EN-QS Rev (a)

3/18

Preliminary

Draft3/13/18

Overview

Note: The battery must be fully charged before the first use. An

MB4-BAT-SCN02 or an MB4-SCN02 Charging Station

must be purchased separately.

Battery

Right button

Left button

Trigger Scanner

User window

Battery

latch

Attach the Scanner to Your Hand

1. Slide your fingers into the loosened strap.

2. Pull the strap to secure to your fingers.

Right or Left Handed Operation

To release the finger trigger, turn over the scanner. Slide the

latch toward the user window to release the finger trigger. Turn

the finger strap around and snap it into place to change the

operation to the correct hand.

Power Up the Scanner

Press the trigger for 10 seconds to power up the scanner. The

battery, WiFi, and Bluetooth status appears in the window.

Wrist Position When Scanning

How to Scan a Bar Code

The 8680i scanner has a view finder that projects a bright aimer

line. This aimer line should be centered over the bar code, but it

can be positioned in any direction for a good read.

Warning: Do not stare directly into the laser beam.

Linear bar codes 2D Matrix symbol s

The aimer line is smaller when the scanner is closer to the code

and larger when it is farther from the code. Symbologies with

smaller bars or elements (mil size) should be read closer to the

unit. Symbologies with larger bars or elements (mil size) should

be read farther from the unit. To read single or multiple symbols

(on a page or on an object), hold the scanner at an appropriate

distance from the target, press the trigger, and center the aimer

line on the symbol. If the code being scanned is highly reflective

(e.g., laminated), it may be necessary to tilt the code up 15° to

18° to prevent unwanted reflection.

Connect the Scanner via Bluetooth

Pair with a Bluetooth Device Using a HID Keyboard

The 8680i scanner can pair with host Bluetooth devices such as

personal computers, laptops, and tablets. This is the default set-

ting for an 8680i scanner. Follow the steps below to establish

one-way communication with the host device.

1. Scan the appropriate Bluetooth HID Keyboard Connect bar

code below.

2. Set your host device so it searches for other Bluetooth

devices. (Refer to your host device’s User’s Guide for pairing

instructions.)

3. Once your host device has located the scanner, select the

8680i scanner name from the list displayed.

4. Some host devices automatically pair with the scanner. If

your host device automatically pairs with the scanner, it

displays a successful pairing message and you do not need

to continue to the next step.

* Bluetooth HID Keyboard

Connect

Bluetooth HID Japanese

Keyboard Connect

5. Some PDT hosts display a prompt for a PIN. Ignore this

message.

6. If your host device does not automatically pair with the

scanner, a PIN is displayed. This PIN must be scanned

within 60 seconds. Using the scanner, you must quickly

scan Bluetooth PIN Code below, then scan the numeric bar

code(s) for the PIN code from the chart below, then scan the

Save bar code.

Bluetooth PIN Code

The Bluetooth symbol appears in the scanner window when the

scanner pairs with a host.

Pair with an Android™ Device

The 8680i scanner can pair with Android devices.

1. Set your Android device so it searches for other Bluetooth

devices. (Refer to your Android device’s User’s Guide for

pairing instructions.)

2. Scan the BT Connection - Android Device bar code below.

Save

BT Connection - Android Device

On the Android device, the 8680i scanner is shown as a key-

board. Click on it to pair. The Bluetooth symbol appears in the

scanner window when the scanner pairs with a host.

Disconnect from the Host

Once your scanner has been connected to a host, you must dis-

connect it in order to communicate with a different device. Scan

the Bluetooth HID Keyboard Disconnect bar code to unlink the

scanner from the currently linked host.

Tap and Pair

You can pair your Android™ phone with the scanner by touching

the devices together.

1. Touch the Android phone to the scanner.

2. The phone recognizes the scanner and prompts you to pair.

3. Verify the pairing of the scanner in your phone’s Bluetooth

settings.

Pair with a Bluetooth Serial Port - PCs/Laptops

The 8680i scanner can pair with a Bluetooth serial port on a PC

or laptop. Scanning the Non-Base BT Connection bar code

below unlinks your scanner and puts it into a discoverable state.

Once the scanner searches for and connects with a Bluetooth

Bluetooth HID Keyboard Disconnect

Autres manuels pour 8680i Series

Table des matières

Autres manuels Honeywell Lecteur de codes-barres

Honeywell

Honeywell Horizon MS7600 Manuel utilisateur

Honeywell

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Manuel utilisateur

Honeywell

Honeywell XENON 1902G-BF Manuel utilisateur

Honeywell

Honeywell HH490 Manuel utilisateur

Honeywell

Honeywell ms2420 Manuel utilisateur

Honeywell

Honeywell MS9500 Voyager Series Manuel utilisateur

Honeywell

Honeywell 3800gPDF - Hand Held Decoding Linear Imager Manuel utilisateur

Honeywell

Honeywell Voyager 1202G Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Honeywell

Honeywell 3800G04-USBKITE Manuel utilisateur

Honeywell

Honeywell 3800 Linear Series Manuel utilisateur

Honeywell

Honeywell Voyager 9520/40 Manuel utilisateur

Honeywell

Honeywell MS1890 Focus Manuel utilisateur

Honeywell

Honeywell Voyager 1450g Series Manuel utilisateur

Honeywell

Honeywell Eclipse MS5100 Series Manuel utilisateur

Honeywell

Honeywell XENON 1902 Manuel utilisateur

Honeywell

Honeywell 3800i Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Honeywell

Honeywell BTRS-QS Manuel utilisateur

Honeywell

Honeywell Xenon XP 195 Series Manuel utilisateur

Honeywell

Honeywell Xenon XP 1950h Manuel utilisateur

Honeywell

Honeywell 3820 Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Honeywell

Honeywell PX4-6IE-CUTR-IG-1 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur