Hirschmann RS20 series Manuel utilisateur

Technical Support

[email protected]

CLI L2E

Release

8.0

05/2013

Reference Manual

Command Line Interface

Industrial ETHERNET (Gigabit) Switch

RS20/RS30/RS40, MS20/MS30

L2E Rel. 8.0

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the enc-

losed CD applies

The performance features described here are binding only if they have been expressly

guaranteed in the contract. This publication has been created by Hirschmann Automation and

Control GmbH according to the best of our knowledge. Hirschmann reserves the right to change

the contents of this manual without prior notice. Hirschmann can give no guarantee in respect

of the correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany 4/30/13

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538 05-05/2013

Content

CLI L2E

Release

8.0

05/2013 3

Content

About this Manual 15

Maintenace 16

1 Command Structure 17

1.1 Format 18

1.1.1 Command 19

1.1.2 Parameters 19

1.1.3 Values 19

1.1.4 Conventions 21

1.1.5 Annotations 22

1.1.6 Special keys 23

1.1.7 Secrets in scripts 24

2 Quick Start up 25

2.1 Quick Starting the Switch 26

2.2 System Info and System Setup 27

3 Mode-based CLI 33

3.1 Mode-based Topology 34

3.2 Mode-based Command Hierarchy 35

3.3 Flow of Operation 37

3.4 “No” Form of a Command 39

3.4.1 Support for “No” Form 39

3.4.2 Behavior of Command Help ("?") 39

4 CLI Commands: Base 41

4.1 System Information and Statistics 42

4.1.1 show 42

4.1.2 show address-conflict 42

4.1.3 show arp switch 43

4.1.4 show bridge address-learning 43

4.1.5 show bridge address-relearn-detect 44

4.1.6 show bridge aging-time 44

Content

4CLI L2E

Release

8.0

05/2013

4.1.7 show bridge duplex-mismatch-detect 45

4.1.8 show bridge framesize 45

4.1.9 show bridge vlan-learning 45

4.1.10 bridge framesize 46

4.1.11 show config-watchdog 46

4.1.12 show device-status 47

4.1.13 show authentication 48

4.1.14 show eventlog 48

4.1.15 show interface 49

4.1.16 show interface ethernet 51

4.1.17 show interface switchport 58

4.1.18 show interface utilization 59

4.1.19 show logging 60

4.1.20 show mac-addr-table 61

4.1.21 show signal-contact 62

4.1.22 show slot 64

4.1.23 show running-config 65

4.1.24 show sysinfo 66

4.1.25 show temperature 68

4.1.26 utilization alarm-threshold 69

4.2 Management VLAN Commands 70

4.2.1 network mgmt_vlan 70

4.3 Class of Service (CoS) Commands 71

4.3.1 classofservice dot1p-mapping 72

4.3.2 classofservice ip-dscp-mapping 73

4.3.3 classofservice trust 74

4.3.4 show classofservice dot1p-mapping 75

4.3.5 show classofservice ip-dscp-mapping 76

4.3.6 show classofservice trust 77

4.3.7 vlan port priority all 77

4.3.8 vlan priority 78

4.4 Management Commands 79

4.4.1 transport input telnet 79

4.4.2 bridge address-learning 80

4.4.3 bridge address-relearn detect operation 80

4.4.4 bridge address-relearn detect threshold 81

4.4.5 bridge aging-time 82

4.4.6 bridge fast-link-detection 83

4.4.7 bridge duplex-mismatch-detect operation 83

Content

CLI L2E

Release

8.0

05/2013 5

4.4.8 bridge vlan-learning 84

4.4.9 ethernet-ip 84

4.4.10 network javascriptmode 85

4.4.11 network mgmt-access add 86

4.4.12 network mgmt-access delete 86

4.4.13 network mgmt-access modify 87

4.4.14 network mgmt-access operation 88

4.4.15 network mgmt-access status 88

4.4.16 network parms 89

4.4.17 network protocol 89

4.4.18 network priority 90

4.4.19 profinetio 91

4.4.20 serial timeout 92

4.4.21 set prompt 92

4.4.22 show ethernet-ip 93

4.4.23 show network 93

4.4.24 show network mgmt-access 95

4.4.25 show profinetio 96

4.4.26 show serial 96

4.4.27 show snmp-access 97

4.4.28 show snmpcommunity 98

4.4.29 show snmptrap 99

4.4.30 show telnet 100

4.4.31 show telnetcon 101

4.4.32 show trapflags 102

4.4.33 snmp-access global 103

4.4.34 snmp-access version 104

4.4.35 snmp-access version v3-encryption 105

4.4.36 snmp-server 106

4.4.37 snmp-server community 107

4.4.38 snmp-server contact 108

4.4.39 snmp-server community ipaddr 109

4.4.40 snmp-server community ipmask 110

4.4.41 snmp-server community mode 111

4.4.42 snmp-server community ro 112

4.4.43 snmp-server community rw 112

4.4.44 snmp-server location 112

4.4.45 snmp-server sysname 113

4.4.46 snmp-server enable traps 113

4.4.47 snmp-server enable traps chassis 114

4.4.48 snmp-server enable traps l2redundancy 115

Content

6CLI L2E

Release

8.0

05/2013

4.4.49 snmp-server enable traps linkmode 116

4.4.50 snmp-server enable traps multiusers 117

4.4.51 snmp-server enable traps port-sec 118

4.4.52 snmp-server enable traps stpmode 119

4.4.53 snmptrap 120

4.4.54 snmptrap ipaddr 121

4.4.55 snmptrap mode 122

4.4.56 snmptrap snmpversion 123

4.4.57 telnetcon maxsessions 124

4.4.58 telnetcon timeout 125

4.5 Syslog Commands 126

4.5.1 logging buffered 126

4.5.2 logging buffered wrap 127

4.5.3 logging cli-command 128

4.5.4 logging console 129

4.5.5 logging host 130

4.5.6 logging host reconfigure 131

4.5.7 logging host remove 131

4.5.8 logging snmp-requests get operation 131

4.5.9 logging snmp-requests set operation 132

4.5.10 logging snmp-requests get severity 132

4.5.11 logging snmp-requests set severity 133

4.5.12 logging syslog 133

4.5.13 logging syslog port 134

4.6 Device Configuration Commands 135

4.6.1 auto-disable reason 135

4.6.2 auto-disable timer 137

4.6.3 auto-negotiate 138

4.6.4 auto-negotiate all 139

4.6.5 cable-crossing 140

4.6.6 media-module 141

4.6.7 dip-switch operation 142

4.6.8 macfilter 143

4.6.9 macfilter adddest 144

4.6.10 macfilter adddest all 145

4.6.11 monitor session 146

4.6.12 monitor session mode 148

4.6.13 monitor session <session-id> source/destination 149

4.6.14 set igmp 150

4.6.15 set igmp 151

Content

CLI L2E

Release

8.0

05/2013 7

4.6.16 set igmp aging-time-unknown 151

4.6.17 set igmp automatic-mode 152

4.6.18 set igmp forward-all 153

4.6.19 set igmp forward-unknown 154

4.6.20 set igmp static-query-port 155

4.6.21 set igmp groupmembershipinterval 156

4.6.22 set igmp interfacemode 157

4.6.23 set igmp lookup-interval-unknown 157

4.6.24 set igmp lookup-resp-time-unknown 158

4.6.25 set igmp maxresponse 159

4.6.26 set igmp querier max-response-time 160

4.6.27 set igmp querier protocol-version 160

4.6.28 set igmp querier status 161

4.6.29 set igmp querier tx-interval 161

4.6.30 set igmp query-ports-to-filter 162

4.6.31 set pre-login-banner text 163

4.6.32 selftest ramtest 163

4.6.33 selftest reboot-on-hdxerror 164

4.6.34 selftest reboot-on-error 165

4.6.35 show auto-disable brief 166

4.6.36 show auto-disable reasons 167

4.6.37 show dip-switch 168

4.6.38 show igmpsnooping 169

4.6.39 show mac-filter-table igmpsnooping 170

4.6.40 show mac-filter-table multicast 171

4.6.41 show mac-filter-table static 172

4.6.42 show mac-filter-table staticfiltering 173

4.6.43 show mac-filter-table stats 174

4.6.44 show monitor session 175

4.6.45 show port 176

4.6.46 show rmon-alarm 177

4.6.47 show selftest 178

4.6.48 show storm-control 179

4.6.49 show storm-control limiters port 179

4.6.50 show vlan 180

4.6.51 show vlan brief 182

4.6.52 show vlan port 183

4.6.53 shutdown 184

4.6.54 shutdown all 185

4.6.55 snmp trap link-status 186

4.6.56 snmp trap link-status all 187

Content

8CLI L2E

Release

8.0

05/2013

4.6.57 spanning-tree bpdumigrationcheck 188

4.6.58 speed 189

4.6.59 storm-control broadcast 190

4.6.60 storm-control egress-limiting 190

4.6.61 storm-control ingress-limiting 191

4.6.62 storm-control ingress-mode 191

4.6.63 storm-control broadcast (port-related) 192

4.6.64 storm-control egress-limit 192

4.6.65 storm-control ingress-limit 193

4.6.66 storm-control ingress-mode 193

4.6.67 storm-control flowcontrol 194

4.6.68 storm-control flowcontrol per port 195

4.6.69 vlan 196

4.6.70 vlan0-transparent-mode 197

4.6.71 vlan acceptframe 198

4.6.72 vlan database 199

4.6.73 vlan ingressfilter 200

4.6.74 vlan name 201

4.6.75 vlan participation 202

4.6.76 vlan participation all 203

4.6.77 vlan port acceptframe all 204

4.6.78 vlan port ingressfilter all 205

4.6.79 vlan port pvid all 206

4.6.80 vlan port tagging all 207

4.6.81 vlan pvid 208

4.6.82 vlan tagging 209

4.7 User Account Management Commands 210

4.7.1 disconnect 210

4.7.2 show loginsession 211

4.7.3 show users 212

4.7.4 users defaultlogin 213

4.7.5 users login <user> 213

4.7.6 users access 214

4.7.7 users name 215

4.7.8 users passwd 216

4.7.9 users snmpv3 accessmode 217

4.7.10 users snmpv3 authentication 218

4.7.11 users snmpv3 encryption 219

4.8 System Utilities 220

4.8.1 address-conflict 220

Content

CLI L2E

Release

8.0

05/2013 9

4.8.2 boot skip-aca-on-boot 221

4.8.3 show boot skip-aca-on-boot 221

4.8.4 clear eventlog 222

4.8.5 traceroute 222

4.8.6 clear arp-table-switch 223

4.8.7 clear config 223

4.8.8 clear config factory 223

4.8.9 clear counters 224

4.8.10 clear hiper-ring 224

4.8.11 clear igmpsnooping 224

4.8.12 clear mac-addr-table 225

4.8.13 clear pass 225

4.8.14 clear signal-contact 226

4.8.15 clear traplog 226

4.8.16 clear ring-coupling 227

4.8.17 clear vlan 227

4.8.18 config-watchdog 228

4.8.19 copy 228

4.8.20 device-status connection-error 234

4.8.21 device-status monitor 235

4.8.22 logout 236

4.8.23 ping 236

4.8.24 signal-contact connection-error 237

4.8.25 signal-contact 237

4.8.26 temperature 239

4.8.27 reboot 240

4.8.28 show reboot 241

4.8.29 reload 242

4.8.30 show reload 243

4.9 LLDP - Link Layer Discovery Protocol 244

4.9.1 show lldp 244

4.9.2 show lldp config 244

4.9.3 show lldp config chassis 245

4.9.4 show lldp config chassis admin-state 245

4.9.5 show lldp config chassis notification-interval 245

4.9.6 show lldp config chassis re-init-delay 246

4.9.7 show lldp config chassis tx-delay 246

4.9.8 show lldp config chassis tx-hold-mult 246

4.9.9 show lldp config chassis tx-interval 247

4.9.10 show lldp config port 248

Content

10 CLI L2E

Release

8.0

05/2013

4.9.11 show lldp config port tlv 249

4.9.12 show lldp remote-data 250

4.9.13 lldp 252

4.9.14 lldp config chassis admin-state 253

4.9.15 lldp config chassis notification-interval 253

4.9.16 lldp config chassis re-init-delay 254

4.9.17 lldp config chassis tx-delay 254

4.9.18 lldp config chassis tx-hold-mult 255

4.9.19 lldp chassis tx-interval 255

4.9.20 clear lldp config all 256

4.9.21 lldp admin-state 256

4.9.22 lldp fdb-mode 257

4.9.23 lldp hm-mode 257

4.9.24 lldp max-neighbors 258

4.9.25 lldp notification 258

4.9.26 lldp tlv link-aggregation 258

4.9.27 lldp tlv mac-phy-config-state 259

4.9.28 lldp tlv max-frame-size 259

4.9.29 lldp tlv mgmt-addr 259

4.9.30 lldp tlv pnio 260

4.9.31 lldp tlv pnio-alias 260

4.9.32 lldp tlv pnio-mrp 260

4.9.33 lldp tlv port-desc 261

4.9.34 lldp tlv port-vlan 261

4.9.35 lldp tlv gmrp 261

4.9.36 lldp tlv igmp 262

4.9.37 lldp tlv portsec 262

4.9.38 lldp tlv ptp 262

4.9.39 lldp tlv protocol 263

4.9.40 lldp tlv sys-cap 263

4.9.41 lldp tlv sys-desc 263

4.9.42 lldp tlv sys-name 264

4.9.43 lldp tlv vlan-name 264

4.9.44 name 265

4.10 SNTP - Simple Network Time Protocol 266

4.10.1 show sntp 266

4.10.2 show sntp anycast 268

4.10.3 show sntp client 268

4.10.4 show sntp operation 269

4.10.5 show sntp server 270

Autres manuels pour RS20 series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hirschmann Routeur réseau

Hirschmann

Hirschmann OCTOPUS OS3 Manuel utilisateur

Hirschmann

Hirschmann OWL LTE Manuel utilisateur

Hirschmann

Hirschmann RSB20-0800T1T1 Manuel utilisateur

Hirschmann

Hirschmann HiSecOS EAGLE20 Manuel utilisateur

Hirschmann

Hirschmann Power MICE Manuel utilisateur

Hirschmann

Hirschmann SPIDER 3TX-TAP Manuel

Hirschmann

Hirschmann PowerMICE Manuel utilisateur

Hirschmann

Hirschmann Power MICE Manuel utilisateur

Hirschmann

Hirschmann RSB20 Manuel utilisateur

Hirschmann

Hirschmann OWL 4G Europe Manuel utilisateur

Hirschmann

Hirschmann GigaLION-24TP Manuel utilisateur

Hirschmann

Hirschmann OWL3G Manuel utilisateur

Hirschmann

Hirschmann MACH104-20TX-FR Series Manuel utilisateur

Hirschmann

Hirschmann SPIDER-SL-40-08T1 Manuel utilisateur

Hirschmann

Hirschmann PowerMICE Manuel utilisateur

Hirschmann

Hirschmann MACH 1020 Manuel utilisateur

Hirschmann

Hirschmann GECKO 4TX Manuel utilisateur

Hirschmann

Hirschmann RSR20-0900 Manuel utilisateur

Hirschmann

Hirschmann SPIDER Premium Line Manuel utilisateur

Hirschmann

Hirschmann RS30-...U Series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann OWL LTE M12 Manuel utilisateur

Hirschmann

Hirschmann EAGLE30-0402 series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel du propriétaire

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité