Hioki CT6700 Manuel utilisateur

CT6701

CURRENT PROBE

CT6700

Instruction Manual

Nov. 2017 Revised edition 3

CT6700A981-03 17-11H

CT6701

CURRENT PROBE

CT6700

Instruction Manual

Nov. 2017 Revised edition 3

CT6700A981-03 17-11H

Contents

Introduction.........................................................................1

Verifying Package Contents ..............................................1

Safety Notes........................................................................2

Usage Notes........................................................................5

1 Overview 23

1.1 Product Overview..........................................23

1.2 Features .........................................................24

1.3 Parts Names and Functions.........................25

1.4 MeasurementWorkow................................30

2 Measurement Procedure 33

2.1 Inspection Before Use ..................................33

2.2 Preparation for Measurements ....................35

Connecting the device to the Power Supply .............35

Performing Demagnetizing and Zero-Adjustment..... 37

2.3 Performing Measurements...........................41

3 Specications 45

3.1 ProductSpecications .................................45

3.2 Functions .......................................................54

4 Maintenance and Service 57

4.1 Troubleshooting ............................................58

4.2 Error ...............................................................61

4.3 Cleaning .........................................................63

4.4 Discarding the Device...................................64

CT6700A981-03

Contents

Introduction

Thank you for purchasing the HIOKI CT6700, CT6701 Current

Probe. To obtain maximum performance from the device,

please read this manual rst,and keep it handy for future

reference.

Verifying Package Contents

When you receive the device, inspect it carefully to ensure

that no damage occurred during shipping. In particular,

check the accessories , panel keys, and connectors. If

damage is evident, or if it fails to operate according to the

specications, contact your dealer or Hioki representative.

Check the package contents as follows.

CT6700, CT6701 Current Probe

Carrying Case

Instruction Manual

(The product ships with

the current probe and

instruction manual stored

in the carrying case.)

Precautions during shipment

•Use the original packing materials when transporting the

device, if possible.

•Transport the device in its carrying case.

Options (sold separately)

The following options are available for the device. Contact

your authorized Hioki distributor or reseller when ordering.

•Model 3269 Power Supply

•Model 3272 Power Supply

Safety Notes

This device is designed to conform to IEC 61010 Safety

Standards, and has been thoroughly tested for safety prior to

shipment. However, using the device in a way not described

in this manual may negate the provided safety features.

Before using the device, be certain to carefully read the

following safety notes.

DANGER

Mishandling during use could result in injury

or death, as well as damage to the device. Be

certain that you understand the instructions and

precautions in the manual before use.

WARNING

With regard to the electricity supply, there are

risks of electric shock, heat generation, re, and

arc discharge due to short circuits. If persons

unfamiliar with electricity measuring device are

to use the device, another person familiar with

such devices must supervise operations.

Safety Notes

Notation

In this manual, the risk seriousness and the hazard levels

are classied as follows.

DANGER

Indicates an imminently hazardous situation

that will result in death or serious injury to

the operator.

WARNING

Indicates a potentially hazardous situation

that may result in death or serious injury to

the operator.

CAUTION

Indicates a potentially hazardous situation

that may result in minor or moderate injury

to the operator or damage to the device or

malfunction.

IMPORTANT

Indicates information related to the operation

of the device or maintenance tasks with

which the operators must be fully familiar.

Indicates a high voltage hazard.

If a particular safety check is not performed

or the device is mishandled, this may give

rise to a hazardous situation; the operator

may receive an electric shock, may get burnt

or may even be fatally injured.

Indicates prohibited actions.

Indicates the action which must be

performed.

*Additional information is presented below.

Bold Device’s keys are indicated in boldface.

Safety Notes

Symbols afxed to the device

Indicates cautions and hazards. When the symbol is

printed on the device, refer to a corresponding topic in

the Instruction Manual.

Indicates that only insulated conductors suited to the

voltage of the circuit under test can be measured.

Symbols for various standards

WEEE marking:

This symbol indicates that the electrical and electronic

appliance is put on the EU market after August 13, 2005,

and producers of the Member States are required to

display it on the appliance under Article 11.2 of Directive

2002/96/EC (WEEE).

Indicates that the product conforms to regulations set

out by the EU Directive.

Accuracy

We dene measurement tolerances in terms of rdg. (reading)

with the following meanings:

rdg.

rdg. (reading or displayed value)

The value currently being measured and indicated

on the measuring device.

Usage Notes

Follow these precautions to ensure safe operation and to

obtain the full benets of the various functions.

DANGER

To avoid electric shock, do not remove the

device's cover. The internal components of the

device carry high voltages and may become

very hot during operation.

WARNING

•Before using the device, make sure that the

insulation on the cord is undamaged and that

no bare conductors are improperly exposed.

Using the device in such conditions could

cause an electric shock, so contact your

dealer or Hioki representative for repair.

•Before using the device, Verify that it operates

normally to ensure that no damage occurred

during storage or shipping. If you nd

any damage, contact your dealer or Hioki

representative.

CAUTION

Be careful to avoid dropping the device or otherwise

subjecting them to mechanical shock, which

could damage the facing surfaces of the core and

adversely affect measurement.

Usage Notes

Installation

For details on the operating temperature and humidity, see the “3

Specications” (p. 45).

WARNING

•Avoid the following locations that could cause

an accident, re, or damage to the device.

•Exposed to direct sunlight or high

temperature

•Exposed to corrosive or combustible gases

•Exposed to water, oil, chemicals, or solvents

•Exposed to high humidity or condensation

•Exposed to a strong electromagnetic eld

or electrostatic charge

•Exposed to high quantities of dust particles

•Near induction heating systems (such as

high-frequency induction heating systems

and IH cooking equipment)

•Susceptible to vibration

•Located near a device that uses high-

frequency power

Avoid obstructing the ventilation holes on the sides

and bottom of the terminator (p. 25), as it could

overheat and be damaged, or cause a re.

CAUTION

•Do not place the device on an unstable table or

an inclined place. Dropping or knocking down the

device can cause injury or damage to the device.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hioki Instrument de mesure

Hioki

Hioki 3197 Manuel utilisateur

Hioki

Hioki TM6102 Manuel utilisateur

Hioki

Hioki PQ3100-91 Manuel utilisateur

Hioki

Hioki 3662-20 Manuel utilisateur

Hioki

Hioki 8715-01 Manuel utilisateur

Hioki

Hioki 3287 Manuel utilisateur

Hioki

Hioki 9276 Manuel utilisateur

Hioki

Hioki MR8740T Manuel utilisateur

Hioki

Hioki IM3523 Manuel d'utilisation et d'entretien

Hioki

Hioki 3274 Manuel utilisateur

Hioki

Hioki 3275 Manuel utilisateur

Hioki

Hioki PQ3100 Manuel utilisateur

Hioki

Hioki HiTester 3443-01 Manuel utilisateur

Hioki

Hioki 9272-05 Manuel utilisateur

Hioki

Hioki 3532-50 Manuel utilisateur

Hioki

Hioki RM2610 Manuel utilisateur

Hioki

Hioki RM3545 Manuel utilisateur

Hioki

Hioki PW3365 Manuel utilisateur

Hioki

Hioki 9605-01 Manuel utilisateur

Hioki

Hioki 3441 Manuel utilisateur

Hioki

Hioki 9010 Manuel utilisateur

Hioki

Hioki 9014 Manuel utilisateur

Hioki

Hioki MR8880-20 Manuel utilisateur

Hioki

Hioki PQ3100 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur