HIK VISION AX PRO Manuel utilisateur

AX PRO

User Manual

AX PRO User Manual

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and

all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version of this Manual at the Hikvision website

(https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the

Product.

Trademarks

and other Hikvision's trademarks and logos are the properties of

Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT

DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND

“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR

A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT

WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS

INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,

WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,

AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE

SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.

ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.

YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

AX PRO User Manual

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN

RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

Data Protection

During the use of device, personal data will be collected, stored and processed. To protect data,

the development of Hikvision devices incorporates privacy by design principles. For example, for

device with facial recognition features, biometrics data is stored in your device with encryption

method; for fingerprint device, only fingerprint template will be saved, which is impossible to

reconstruct a fingerprint image.

As data controller, you are advised to collect, store, process and transfer data in accordance with

the applicable data protection laws and regulations, including without limitation, conducting

security controls to safeguard personal data, such as, implementing reasonable administrative and

physical security controls, conduct periodic reviews and assessments of the effectiveness of your

security controls.

AX PRO User Manual

iii

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

AX PRO User Manual

Regulatory Information

EN 50131-1:2006+A1:2009+A2:2017

EN 50131-3:2009

EN 50131-6:2017

EN 50131-5-3:2017

EN 50131-10: 2014

EN 50136-2: 2013

Security Grade (SG): 2

Environmental Class (EC) : II

DP2

Certified by Telefication

Note EN50131 compliance labeling should be removed if non-compliant configurations are

used.

EU Conformity Statement

This product and - if applicable - the supplied accessories too

are marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the EMC Directive

2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive

2011/65/EU

2012/19/EU (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product

to your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead

(Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For more

information see:www.recyclethis.info

AX PRO User Manual

Warning

This is a class A product. In a domestic environment this

product may cause radio inter-ference in which case the user

may be required to take adequate measures.

FCC Information

Please take attention that changes or modification not

expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and

receiver.

—Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for

help.

This equipment should be installed and operated with a

minimum distance 20cm between the radiator and your body.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

AX PRO User Manual 
vi 
Contents 
Chapter 1 Introduction ................................................................................................................... 9 
1 System Description ........................................................................................................... 9 
2 Specification ................................................................................................................... 10 
3 Appearance..................................................................................................................... 14 
Chapter 2 Start Up........................................................................................................................ 17 
1 Initial the Device ............................................................................................................. 17 
2 Install the Device ............................................................................................................ 18 
Chapter 3 User Management ....................................................................................................... 20 
1 User Management .......................................................................................................... 20 
1.1 Invite the Administrator....................................................................................... 20 
1.2 Cancel Installer Access ......................................................................................... 21 
1.3 Add an Operator .................................................................................................. 22 
1.4 Delete an Operator .............................................................................................. 23 
2 Access Entries ................................................................................................................. 23 
Chapter 4 Configuration ............................................................................................................... 25 
1 Set-up with Hik-Proconnect ............................................................................................ 25 
1.1 Use the Hik-Proconnect APP ................................................................................ 25 
1.2 User the Hik-ProConnect Portal ........................................................................... 36 
2 Set-up with Hik-Connect ................................................................................................. 40 
3 Set-up with the Web Client............................................................................................. 48 
3.1 Communication Settings ...................................................................................... 49 
3.2 Device Management ............................................................................................ 62 
3.3 Area Settings ........................................................................................................ 70 
3.4 Video Management.............................................................................................. 72 
3.5 Permission Management ..................................................................................... 74 
3.6 Maintenance ........................................................................................................ 75 
3.7 System Settings .................................................................................................... 77 
3.8 Check Status......................................................................................................... 89 
4 Report to ARC (Alarm Receiver Center) .......................................................................... 90 

AX PRO User Manual 
vii 
Setup ATS in Transceiver of Receiving Center ............................................................... 90 
Setup ATS in Transceiver of the Panel........................................................................... 91 
Signaling Test ................................................................................................................ 92 
Chapter 5 General Operations...................................................................................................... 94 
5.1 Arming ............................................................................................................................ 94 
5.2 Disarming........................................................................................................................ 95 
5.3 SMS Control .................................................................................................................... 95 
A. Trouble Shooting...................................................................................................................... 96 
A.1 Communication Fault ..................................................................................................... 96 
A.1.1 IP Conflict............................................................................................................. 96 
A.1.2 Web Page is Not Accessible ................................................................................. 96 
A.1.3 Hik-Connect is Offline .......................................................................................... 96 
A.1.4 Network Camera Drops off Frequently................................................................ 96 
A.1.5 Failed to Add Device on APP ................................................................................ 96 
A.1.6 Alarm Information is Not Reported to APP/4200/Alarm Center ......................... 97 
A.2 Mutual Exclusion of Functions........................................................................................ 97 
A.2.1 Unable to Enter Registration Mode ..................................................................... 97 
A.3 Zone Fault....................................................................................................................... 97 
A.3.1 Zone is Offline...................................................................................................... 97 
A.3.2 Zone Tamper-proof.............................................................................................. 97 
A.3.3 Zone Triggered/Fault ........................................................................................... 97 
A.4 Problems While Arming.................................................................................................. 98 
A.4.1 Failure in Arming (When the Arming Process is Not Started) .............................. 98 
A.5 Operational Failure......................................................................................................... 98 
A.5.1 Failed to Enter the Test Mode.............................................................................. 98 
A.5.2 The Alarm Clearing Operation on the Panel Does Not Produce the Alarm Clearing 
Report ................................................................................................................... 98 
A.6 Mail Delivery Failure....................................................................................................... 98 
A.6.1 Failed to Send Test Mail....................................................................................... 98 
A.6.2 Failed to Send Mail during Use ............................................................................ 99 
A.6.3 Failed to Send Mails to Gmail .............................................................................. 99 
A.6.4 Failed to Send Mails to QQ or Foxmail................................................................. 99 

AX PRO User Manual 
viii 
A.6.5 Failed to Send Mails to Yahoo ............................................................................. 99 
A.6.6 Mail Configuration............................................................................................. 100 
B. Input Types............................................................................................................................. 101 
C. Output Types.......................................................................................................................... 104 
D. Event Types ............................................................................................................................ 105 
E. Access Levels .......................................................................................................................... 106 
F. Signalling ................................................................................................................................ 108 
Detection of ATP/ATS Faults............................................................................................... 108 
ATS Category ...................................................................................................................... 108 
G. SIA and CID Code.................................................................................................................... 109 
H. Communication Matrix and Operation Command................................................................. 115 

Chapter 1 Introduction

1.1 System Description

AX Pro is a wireless alarm system designed to protect premises required for proper protection

from intrusion alarm. It supports LAN /Wi-Fi as the primary transmission network. The system is

applicable to the scenarios of market, store, house, factory, warehouse, office, etc.

●Innovative Tri-X 2-way wireless technology.

●Two-way communication with AES-128 encryption.

●Frequency-hopping spread spectrum (FHSS) is used to avoid interference, to prevent

eavesdropping, and to enable code-division multiple access (CDMA) communications.

●Voice guide for alarm alert, system status indication, operation prompt, etc.

●Configuration via web client, mobile client, and Convergence Cloud.

●Pushes alarm notification via messages or phone calls.

●Views life videos from Hik-Connect and alarm video clips via emails, Hik-ProConnect, and Hik-

Connect.

●Uploads alarm reports to ARC.

●SIA-DC09 protocol, and supports both Contact ID and SIA data format.

●4520 mAh lithium backup battery with 12 H standby duration.

Autres manuels pour AX PRO

Table des matières

Autres manuels HIK VISION Système de sécurité

HIK VISION

HIK VISION DS-PWA32-K Manuel utilisateur

HIK VISION

HIK VISION DS-K2M060 Manuel utilisateur

HIK VISION

HIK VISION DS-PEA102S Manuel utilisateur

HIK VISION

HIK VISION Pyronix Enforcer 64 Manuel utilisateur

HIK VISION

HIK VISION DS-KD8003-IME1 Manuel utilisateur

HIK VISION

HIK VISION DS-PWA96-DB-WE Manuel utilisateur

HIK VISION

HIK VISION DS-PK-LRT Manuel utilisateur

HIK VISION

HIK VISION DS-K3B802BX Series Manuel utilisateur

HIK VISION

HIK VISION AX PRO DS-PWA64-L-WE Manuel utilisateur

HIK VISION

HIK VISION NB V6 Manuel utilisateur

HIK VISION

HIK VISION DS-PEA Series Manuel utilisateur

HIK VISION

HIK VISION Pyronix Enforcer V10 Manuel de service

HIK VISION

HIK VISION DS-MI9605-GA Series Manuel utilisateur

HIK VISION

HIK VISION AX PRO M2 Manuel utilisateur

HIK VISION

HIK VISION Blazer Express 16 Manuel utilisateur

HIK VISION

HIK VISION DS-PD1-EB-WS2 Manuel utilisateur

HIK VISION

HIK VISION DS-K1T604M Manuel utilisateur

HIK VISION

HIK VISION DS-9600NI-ST Series Manuel utilisateur

HIK VISION

HIK VISION DS-PRI120 Manuel utilisateur

HIK VISION

HIK VISION DS-PEA101 Series Manuel utilisateur

HIK VISION

HIK VISION AX Series Manuel utilisateur

HIK VISION

HIK VISION AX PRO Series Guide d'installation

HIK VISION

HIK VISION Blazer Express Station Manuel utilisateur

HIK VISION

HIK VISION Castle/Pyronix Euro 280 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur