HIK VISION DS-K1100 Series Guide de démarrage rapide

Title:

DS-K1100 Series Card Readers Connect

to DS-K1T105&DS-K1T200 Series

Access Control Terminal

Version:

v1.0

Date:

6/21/2017

Product:

Access Control Device

Page:

1 of 4

DS-K1100 Series Card Readers Connect to

DS-K1T105&DS-K1T200 Series Access Control Terminal

Preparation

Connecting card reader to access control terminal is mainly applied to swiping card to open the door for

exiting. For card reader, access controller and access control terminal in this documents, please check the

table below:

Card Reader

Access Control Terminal

DS-K1101M/MK, DS-K1102M/MK,

DS-K1103M/MK, DS-K1104M/MK,

DS-K1107M/MK, DS-K1108M/MK

DS-K1T105M/M-C

DS-K1T200MF/MF-C

DS-K1102E/EK, DS-K1107E/EK,

DS-K1108E/EK

DS-K1T105E/E-C

DS-K1T200EF/EF-C

Note

If the model of access control terminal is DS-K1T105E/E-C or DS-K1T200EF/EF-C, we suggest

customers should match the following several card readers, such as DS-K1102E/EK, DS-K1107E/EK and

DS-K1108E/EK; you can find the same symbol ‘E’in the access control terminal and card reader model

name, that means both devices can recognize the EM Card.

The ‘M’access control terminal should be matched the ‘M’card reader either, and they can recognize the

Mifare1 Card.

Notice

1. Please cut off power supply before wiring;

2. DS-K1100 Series Card Readers support private RS485 protocol and standard Wiegand protocol ,

correspondingly, there are RS485 interfaces and Wiegand interfaces in access control terminal, so

there are two optional ways of wiring;

Interface

Color

RS485

RS485+

Yellow

RS485-

Blue

GND

Black

Wiegand

Green

White

WG_OK

Brown

WG_ERR

Orange

TAMPER

Gray

BUZZER

Purple

Title:

DS-K1100 Series Card Readers Connect

to DS-K1T105&DS-K1T200 Series

Access Control Terminal

Version:

v1.0

Date:

6/21/2017

Product:

Access Control Device

Page:

2 of 4

3. Please check the rear panel of card reader and unscrew it, you could find DIP switch module;

The No. of DIP switch from left to right is 1~8:

Description of DIP Switch:

Icon

Description

Represent 1 in binary mode

Represent 0 in binary mode

No.

Description

DIP Switch Status

1~4

Address of RS485

1: 1

0: 0

Read card No. or file in card(Reserved)

1: read card No;

0: read file in card.

Wiegand protocol or RS-485 protocol

1: Wiegand protocol

0: RS-485 protocol.

Wiegand Protocol

(available when No. 6 is 1)

1: Wiegand protocol of 26-bit;

0: Wiegand protocol of 34-bit.

Matched Resistance(Reserved)

(available for RS-485 protocol)

1: Enable;

0: Disable.

RS485 Wiring

Step 1: DIP Switch

Please set the DIP switch firstly before connecting the external card reader, the binary value of the card

reader is 0100 0000, please set as the following picture;

Title:

DS-K1100 Series Card Readers Connect

to DS-K1T105&DS-K1T200 Series

Access Control Terminal

Version:

v1.0

Date:

6/21/2017

Product:

Access Control Device

Page:

3 of 4

Step 2: Wiring

We recommend that customers use external power supply to card reader.

Please connect card reader as following picture:

Wiegand Wiring

Step 1: DIP Switch

When terminal adopts the wiegand interafce connecting card reader, terminal only supports Wiegand34

protocol. Please set the DIP switch firstly before connecting the external card reader, the binary value of

the card reader is 0000 0100, please set as the following picture;

Step 2: Wiring

We recommend that customers use external power supply to card reader.

Please know that the external power supply and the access control terminal should use the same GND

cable; Please connect card reader as following picture:

Step 3: Local Setting

Enter local configuration interface by inputting password, Comm Wiegand, setting like below picture

shows:

Power Input

RS485

Interface

RS485+

RS485-

GND

RS485-/Blue

RS485+/Yellow

GND/Black

12V/Red

External Power

Supply

Power Input

Wiegand

Interface

WG_ERR

TAMPER

BUZZER

GND/Black

+12V/Red

Power Supply

WG_OK

W1/White

W0/Green

ERR/Orange

OK/Brown

BUZZER/Purple

Power

Input

GND

12V

Title:

DS-K1100 Series Card Readers Connect

to DS-K1T105&DS-K1T200 Series

Access Control Terminal

Version:

v1.0

Date:

6/21/2017

Product:

Access Control Device

Page:

4 of 4

First Choice for Security Professionals

HIKVISION Technical Support

Autres manuels pour DS-K1100 Series

Ce manuel convient aux modèles suivants

Autres manuels HIK VISION Lecteur de cartes

HIK VISION

HIK VISION DS-K1201A Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1108AD Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1801 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1100 Series Manuel utilisateur

HIK VISION

HIK VISION UD30374B-A Manuel utilisateur

HIK VISION

HIK VISION DS-K1107MK Manuel utilisateur

HIK VISION

HIK VISION DS-K1200 Series Mode d’emploi

HIK VISION

HIK VISION DS-K1102AE Manuel utilisateur

HIK VISION

HIK VISION DS-K1108AM Manuel utilisateur

HIK VISION

HIK VISION DS-K1107 Series Manuel utilisateur

HIK VISION

HIK VISION D8E Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1106M Manuel utilisateur

HIK VISION

HIK VISION DS-K1101M Manuel utilisateur

HIK VISION

HIK VISION DS-K1201AEF Manuel utilisateur

HIK VISION

HIK VISION DS-K1107 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1100 Series Manuel utilisateur

HIK VISION

HIK VISION DS-PT1-WE Manuel utilisateur

HIK VISION

HIK VISION DS-K1802 Series Manuel utilisateur

HIK VISION

HIK VISION DS-TRI4 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1108 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1T500 Manuel utilisateur

HIK VISION

HIK VISION DS-k1106 Manuel utilisateur

HIK VISION

HIK VISION DS-K1200 Series Guide de démarrage rapide

HIK VISION

HIK VISION DS-K1108A Series Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur