HIK VISION K1201AMF Manuel utilisateur

Fingerprint Card Reader

User Manual

Fingerprint Card Reader User Manual

User Manual

About this Manual

This manual is applicable for fingerprint card reader.

The Manual includes instructions for using and managing the product.

Pictures, charts, images and all other information hereinafter are for

description and explanation only. The information contained in the Manual is

subject to change, without notice, due to firmware updates or other reasons.

Please find the latest version in the company website.

Please use this user manual under the guidance of professionals.

Legal Disclaimer

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL

NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT

LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO

ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY

SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE

APPLICABLE LAW, THE LATER PREVAILS.

Support

Should you have any questions, please do not hesitate to contact your local

dealer.

Data Protection

During the use of device, personal data will be collected, stored and

processed. To protect data, our devices incorporates privacy by design

principles. For example, for device with facial recognition features, biometrics

data is stored in your device with encryption method; for fingerprint device,

only fingerprint template will be saved, which is impossible to reconstruct a

fingerprint image.

As data controller, you are advised to collect, store, process and transfer data

in accordance with the applicable data protection laws and regulations,

including without limitation, conducting security controls to safeguard

personal data, such as, implementing reasonable administrative and physical

Fingerprint Card Reader User Manual

security controls, conduct periodic reviews and assessments of the

effectiveness of your security controls.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Fingerprint Card Reader User Manual

iii

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive

2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked

with this symbol cannot be disposed of as

unsorted municipal waste in the European Union.

For proper recycling, return this product to your

local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated

collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For more information see:

www.recyclethis.info

Use only power supplies listed in the user instructions:

Model

Manufacturer

Standard

DSA-12PFT-12FUK 120100

Dee Van Enterprise Co., Ltd.

DSA-12PFT-12FAU 120100

Dee Van Enterprise Co., Ltd.

Fingerprint Card Reader User Manual

Model

Manufacturer

Standard

DSA-12PFT-12FIN 120100

Dee Van Enterprise Co., Ltd.

DSA-12PFT-12FUS 120100

Dee Van Enterprise Co., Ltd.

IEC

DSA-12PFT-12 FBZ 120100

Dee Van Enterprise Co., Ltd.

NBR

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

Safety Instruction

These instructions are intended to ensure that user can use the product

correctly to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment

damage.

Warnings

All the electronic operation should be strictly compliance with the

electrical safety regulations, fire prevention regulations and other related

regulations in your local region.

Please use the power adapter, which is provided by normal company. The

power consumption cannot be less than the required value.

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent potential

injury or material damage.

Fingerprint Card Reader User Manual

Do not connect several devices to one power adapter as adapter overload

may cause over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire,

install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly

fixed.

If smoke, odors or noise rise from the device, turn off the power at once

and unplug the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the

nearest service center. Never attempt to disassemble the device yourself.

(We shall not assume any responsibility for problems caused by

unauthorized repair or maintenance.)

Cautions

Do not drop the device or subject it to physical shock, and do not expose it

to high electromagnetism radiation. Avoid the equipment installation on

vibrations surface or places subject to shock (ignorance can cause

equipment damage).

Do not place the device in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source

such as heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or

smear may occur otherwise (which is not a malfunction however), and

affecting the endurance of sensor at the same time.

Fingerprint Card Reader User Manual

Please use the provided glove when open up the device cover, avoid direct

contact with the device cover, because the acidic sweat of the fingers may

erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of

the device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any

failure occurred, you need to return the device to the factory with the

original wrapper. Transportation without the original wrapper may result

in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of

explosion. Replace with the same or equivalent type only. Dispose of used

batteries according to the instructions provided by the battery

manufacturer.

Biometric recognition products are not 100% applicable to anti-spoofing

environments. If you require a higher security level, use multiple

authentication modes.

Please take care of your card and report card loss in time when card is lost.

If you require a higher security level, use multiple authentication modes.

Multiple card types are supported. Please select an appropriate card type

according to the card performance and the usage scenarios.

0100001090812

Fingerprint Card Reader User Manual 
1 
Content 
Chapter 1 Introduction ........................................................... 3 
1.1 Product Overview .....................................................3 
1.2 Product Appearance .................................................3 
Chapter 2 Installation ............................................................. 5 
2.1 Introduction for DIP Switch.......................................5 
2.2 Definition of Cable ....................................................6 
2.3 Wiring Cables ...........................................................6 
2.4 Installing Card Reader ...............................................7 
Chapter 3 Sound Prompt and Indicator .................................. 9 
Appendix: Tips for Scanning Fingerprint.................................... 11 
 

Fingerprint Card Reader User Manual

Chapter 1 Introduction

1.1 Product Overview

Fingerprint and card reader is a kind of high-performance product,

with a 32 bit high-speed processor. It communicates with access

controller via the RS-485 protocol. And a built-in tamper-proof

module helps to protect card reader from malicious damage. NFC

tag anti-cloning is also supported.

1.2 Product Appearance

Figure 1-1 Front View

Figure 1-2 Rear View

Fingerprint Card Reader User Manual

Table 1-1 Components Description

No.

Name

Fingerprint Scanner

Cable Interface of RS-485, Power, LED Control,

etc.

DIP Switch

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HIK VISION Lecteur de cartes

HIK VISION

HIK VISION DS-K1801 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1100M Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1201AEF Manuel utilisateur

HIK VISION

HIK VISION DS-K1201MF Manuel utilisateur

HIK VISION

HIK VISION DS-K1T500 Manuel utilisateur

HIK VISION

HIK VISION DS-K1802 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1107 Series Manuel utilisateur

HIK VISION

HIK VISION DS-k1106 Manuel utilisateur

HIK VISION

HIK VISION DS-K1101M Manuel utilisateur

HIK VISION

HIK VISION DS-K1107 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1109 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1107A Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1100 Series Manuel utilisateur

HIK VISION

HIK VISION DS-TRI4 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1101M Manuel utilisateur

HIK VISION

HIK VISION UD30374B-A Manuel utilisateur

HIK VISION

HIK VISION DS-K1108 Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1201A Series Manuel utilisateur

HIK VISION

HIK VISION DS-PT1-WE Manuel utilisateur

HIK VISION

HIK VISION DS-K1200 Series Mode d’emploi

HIK VISION

HIK VISION DS-K1108AM Manuel utilisateur

HIK VISION

HIK VISION DS-K1102AE Manuel utilisateur

HIK VISION

HIK VISION K1108AMK Series Manuel utilisateur

HIK VISION

HIK VISION DS-K1108AD Series Manuel utilisateur

Manuels Lecteur de cartes populaires d'autres marques

Lindy

Lindy 43185 Manuel utilisateur

Lindy

Lindy 43185 Manuel utilisateur

ViziT

ViziT RD-4F Manuel utilisateur

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuel utilisateur

AVID ID

AVID ID AVID1043 Manuel utilisateur

Conrad

Conrad PCMCIA Manuel utilisateur

Rosslare

Rosslare DR-6255 Manuel utilisateur

Lindy

Lindy 51541 Manuel utilisateur

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuel utilisateur

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuel utilisateur

ACS

ACS ACR122L Manuel utilisateur

Secukey

Secukey S2-MF Manuel utilisateur

Elecom

Elecom MR-SMC07 series Manuel utilisateur

Alien

Alien ALR-9800 Manuel utilisateur

ACS

ACS ACR310 Manuel utilisateur

Datamars

Datamars R-IN1300 MID Manuel utilisateur

Alarm Lock

Alarm Lock AL-PRE2 Manuel utilisateur

xpr

xpr B100PROX-AH Guide de l'utilisateur