Health O Meter 500KL Manuel utilisateur

Model 500KL

Eye Level Digital Beam Scale

E112697

UL 60601-1

CSA C22.2 No. 601.1-M90

User Instructions

PELSTAR, LLC 9500 West 55th St. McCook, IL 60525-7110 USA www.homscales.com

P/N UM500KL Rev 20150305

Model 500KL

Thank you for your purchase of this Health o meter®Professional product. Please read this

manual carefully, and keep it for easy reference or training.

TABLE OF CONTENTS

Caution and Warning.................................................................................................3

Specifications / Definition of Symbols........................................................................5

Certifications / Connectivity / Disposal ......................................................................6

500KL Assembly Instructions ...................................................................................7

Setup / Batteries........................................................................................................15

Quick Start Instructions.............................................................................................17

Maintenance..............................................................................................................21

Calibration.................................................................................................................22

Troubleshooting ........................................................................................................23

Warranty....................................................................................................................24

Note: This scale has been factory calibrated, and does not

require calibration prior to use.

Please register your scale for warranty coverage at:

www.homscales.com

For User Instructions updates and revisions please go to:

www.homscales.com

CAUTION AND WARNING

When Operating this scale:

To prevent injury and damage to your scale, please follow the enclosed user instructions

to assemble and operate very carefully.

Exercise caution when assembling the scale column.

For accurate weighing, this scale must be placed on a flat, stable surface.

For accurate weighing, verify before each use the proper operation according to the

procedure described in this manual.

Operating this scale at voltages and frequencies other than specified can damage the

equipment and will void the warranty.

Do not transport the scale with any weight on the platform.

Do not exceed recommended weight limit of 500 lb / 220 kg for this scale.

Do not use in the presence of flammable or explosive materials.

For accurate weighing, if the “Lo” indicator activates, replace the batteries or switch to

the optional AC adapter as soon as possible.

If the scale becomes damaged, it should not be operated until properly serviced. All

repairs should only be performed by authorized Health o meter®Professional service

personnel.

When replacing / inserting batteries, be sure to use all new batteries.

To prevent patient injury, the patient must be attended throughout the entire weighing

event.

This equipment has been tested and found to comply with the EMC limits for the Medical

Device Directive 93/42/EEC (EN 55011 Class A and EN 60601-1-2). These limits are

designed to provide reasonable protection against harmful interference in a typical

medical installation. The equipment generates, uses and may radiate radio frequency

energy and, if not installed and used in accordance with these instructions, may cause

harmful interference to other devices in the vicinity. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference with other devices, which can be determined by turning the

equipment off and on, the user is encouraged to try to eliminate the interference by one

or more of the following measures:

oReorient or relocate the receiving device.

oIncrease the separation between the equipment.

oConnect the equipment into an outlet on a circuit different from that to which the

other device(s) is connected.

oConsult Customer Service or a field service technician for help.

CAUTION AND WARNING

When operating this scale with the AC adapter:

Operate this scale exclusively with the AC adapter provided by Health o meter

Professional. Use of an unspecified adapter will void the warranty, and can pose a

serious safety hazard.

For use with AC adapter model ADPT30WA (International, plug kit) or ADPT31

(Domestic, USA).

Prior to using this scale, inspect theAC adapter cord for cracking / fraying, or for broken

/ bent plug prongs.

Prior to using this scale, ensure that theAC adapter is plugged into an outlet with the

rated voltage appropriate for operation.

Ensure that the AC adapter outlet is wired to a circuit breaker or other protected power

source.

Ensure that the AC adapter and scale do not come in contact with liquids, excessive

temperature, or excessive humidity.

Unplug the AC adapter, and carefully store both the adapter and adapter cord before

moving the scale.

If the scale is being connected to another medical device, the power adapter must not be

used. Disconnect the power adapter from the scale and use only the battery power.

SPECIFICATIONS FOR THIS SCALE

General

The Model 500KL eye level digital beam scale uses highly sophisticated microprocessor

technology. Each precision scale is designed to provide accurate, reliable and repeatable

weight measurements. In addition, each scale is designed to provide the user with features that

make the weighing process simple, fast, and convenient.

Weight can be displayed in pounds (lb) or in kilograms (kg). This scale can be powered using

an AC adapter (not included), or by 6 - AA batteries (included).

500KL Scale Specifications

Capacity and Resolution 500 lb x 0.2 lb (220 kg x 0.1 kg)

Power Requirements 120 - 240AC, 50 - 60Hz - 9V DC adapter or 6 - AA batteries

Environmental Operating temperatures: 50°F to 104°F (10°C to 40°C)

Storage temperatures: 30°F to 122°F (0°C to 50°C)

Maximum Humidity: 95% RH

Physical Dimensions Scale

(Overall Dimensions)

Width: 14-1/8” (36 cm)

Depth: 21-1/8” (53.8 cm)

Height: 53-5/8” (136.2 cm)

Weight: 21 lb (9.5 kg)

Platform

(Standing Area)

Width: 13-¾” (34.9 cm)

Depth: 16-½” (41.9 cm)

Height: 2-3/8” (6.0 cm)

DEFINITION OF SYMBOLS

Attention, Consult Accompanying Documents 40C Temperature range

(10°C to 40°C / 50°F to 104°F)

10C

AC to DC power supply

(9V DC, 500mA)

Humidity range

(10% - 95% RH) DC Connector Polarity

Type BF Applied Parts

Atmospheric pressure range

(500hPa – 1060hPa)

AC to DC power supply

CERTIFICATIONS / CONNECTIVITY / DISPOSAL

Certification Descriptions

Pelstar, LLC has been officially certified as a manufacturer of Health o

meter®Professional medical devices to be in compliance with stringent legal

requirements. The Pelstar, LLC quality assurance system covers the design,

marketing, and distribution of specialized scales for the Healthcare Industry.

This product is tested to and meets the requirements of:

1. UL60601-1 First Edition: Safety for Medical Electrical Equipment

2. CSA C22.2 No. 601-1 M90: Medical Electrical Equipment

500KL Scale Connectivity Information

To enable reliable transmission of weight, height, and Body Mass Index (BMI) data, this scale is

designed to connect to a computer, monitor, or other electronic device via a built-in USB port.

This connectivity helps minimize a source of potential medical errors caused by incorrectly

copying and then recording patient data.

This scale is EMR-EHR compatible. For more information regarding how to connect this scale to

other electronic devices, please contact Health o meter®Professional Scales Technical Support,

available during normal business hours at 1-800-638-3722.

500KL Scale Disposal

This Health o meter®Professional scale must be disposed of properly as electronic waste.

Follow the national, regional or local regulations which apply to you for disposal of electronic

waste or batteries. Do not dispose of this device in the domestic waste stream.

500KL ASSEMBLY INSTRUCTIONS

Before Assembly

Each 500KL eye level digital beam scale is shipped disassembled in one carton. Carefully

inspect the carton for shipping damage before unpacking. If damage is found, contact your

shipper or a Health o meter®Professional representative immediately at 1-800-815-6615.

Claims must be filed with the shipper as soon as possible after receipt of the package. The

following information details what you will find inside the main carton as you unpack the parts for

assembly.

To prevent scratching any components, carefully remove each assembly from the carton and

unwrap the packing materials. Set the carton aside for storage. To avoid damaging the scale

parts when unpacking, do not use a box cutter, knife, scissors, or any sharp object to open the

protective inner packaging.

Parts List

Carton

(1) Scale platform

(1) Upper column (w / display assembly)

(1) Lower column

(6) AA batteries

(1) User instructions

(1) Upper height rod (w / head assembly)

(1) Lower height rod

Hardware attached to column

Tools Required

Phillips head screwdriver (not included)

500KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Assembling the 500KL Scale (Refer to Figures 1 - 11)

Caution: It is recommended that the assembly be performed by two persons.

1. Carefully remove the scale platform Cand columns Aand Bfrom the carton. Place the scale

platform and columns on a flat, level, and dry surface (see Figure 1).

2. Remove the 4 small screws and washers from the bottom of column B(see Figures 1 & 2).

3. Locate cable connector inside column A(see Figures 1 & 3).

4. While holding column A, slide the cable connector through the top of column B. The top of

column Bhas a notch (see Figures 1 & 5).

5. Plug the cable connector into the RJ jack, located on the scale platform C(see Figures 1 & 4).

Note: Ensure that the cable connector is correctly plugged into the RJ jack.

6. Align column A and column B. Snap the locking tab into place. Ensure that the locking tab is

locked securely into place (see Figures 1 & 5).

7. Position and secure the connected columns Aand B to the scale platform C.

8. Insert the 4 small screws through the bottom of the scale platform Cscrew holes and into

column B. Ensure that washers are located between the screw heads and the scale platform

Cscrew holes (see Figures 1, 6, & 7).

9. Using a Phillips head screwdriver, tighten the screws to secure column Bto the base of the

scale platform C(see Figure 1, 6, & 7).

Note: Ensure that the screws are fully tightened to prevent damage to the scale.

10. Locate the upper height rod Dand lower height rod Efrom the carton (see Figure 1).

11. Align the upper height rod Dwith the lower height rod E. Snap the locking tab into place.

Ensure locking tab is securely locked (see Figures 8 & 9).

12. Position the bottom of the fully assembled height rod into the height rod opening Gat the top

of the upper column A. Press locking tab Finward to insert the height rod into the height rod

opening G(see Figures 1 & 10).

13. The scale is now assembled and ready for use (see Figure 11).

500KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Figure 1

Screws and washers

Column

Figure 2

500KL ASSEMBLY INSTRUCTIONS (CONTINUED)

Cable connecto

Column

Figure 3

RJ jack

Scale platform C

Figure 4

Autres manuels pour 500KL

Table des matières

Langues :

Autres manuels Health O Meter Échelle

Health O Meter

Health O Meter Professional 499KG Manuel utilisateur

Health O Meter

Health O Meter HDM560 Manuel utilisateur

Health O Meter

Health O Meter BFM884DQ1-60 Manuel utilisateur

Health O Meter

Health O Meter HDR900 Manuel utilisateur

Health O Meter

Health O Meter 32910003 Manuel utilisateur

Health O Meter

Health O Meter 594KL Manuel utilisateur

Health O Meter

Health O Meter Professional 1100KL Dimensions

Health O Meter

Health O Meter HDL489-60 Manuel utilisateur

Health O Meter

Health O Meter Health o meter BFM955 Manuel utilisateur

Health O Meter

Health O Meter BFM147-01 Manuel utilisateur

Health O Meter

Health O Meter HDM770 Manuel utilisateur

Health O Meter

Health O Meter Proplus 2101KGWA Manuel utilisateur

Health O Meter

Health O Meter HAB020 Manuel utilisateur

Health O Meter

Health O Meter 1101KL Manuel utilisateur

Health O Meter

Health O Meter 800KL Manuel utilisateur

Health O Meter

Health O Meter PROPLUS 2000KL Manuel utilisateur

Health O Meter

Health O Meter PRO PLUS 2450KL Manuel utilisateur

Health O Meter

Health O Meter 450KL Manuel utilisateur

Health O Meter

Health O Meter 524KL Manuel utilisateur

Health O Meter

Health O Meter 752KL Manuel utilisateur

Health O Meter

Health O Meter 2595KL Manuel utilisateur

Health O Meter

Health O Meter HAB981 Manuel utilisateur

Health O Meter

Health O Meter 550KL Manuel utilisateur

Health O Meter

Health O Meter 2500CKL Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur