HDI Mobi OS Series Manuel utilisateur
- 1 -
HDi Mobi OS™ Multi-touch Screen
Operation Manual (Android 5.0)
Remarks:
Technical parameters and pictures in this manual are for reference only and subject to change without notice.
The actual product may differ.
Before using our product please read this manual carefully and keep for future reference if required.
This manual should not be copied fully or partially in any kind or manner without written approval of HDi.
- 2 -
Introduction
Thank you for buying our new generation interactive multi-touch MTS product. This manual provides you with the necessary
information to assist in the operations of this device. If you have further queries please do not hesitate to contact our support
team.
HDi is dedicated to developing and improving the performance and reliability of our products. We have designed and
manufactured this device with one objective in mind and that is to ensure that our customers’ needs and user experience are
fulfilled.
Thank you for your purchasing this product.
- 3 -
Safety considerations
WARNING
1. Do not place containers with liquid on or near this product.
2. Use only dry cloth to clean.
3. Do not block any ventilation holes.
4. Install this product according to manufacturer’s specifications
5. A distance of at least 160mm must be kept from this product and other objects and/or walls.
6. Do not install this product near heat sources.
7. This product must be connected to a power point which is appropriately earthed.
8. Use the earthed power plug supplied by with this product.
9. Keep the power cord tangle free.
10. Use a properly functioning power point at all times.
11. Disconnect the power plug during storm or if you intend not to use for a long period of time.
12. The device is a heavy product and when moving use appropriate equipment to avoid injury.
13. Use qualified technicians to mount the device on the wall and/or mobile trolley. Abide by manufacturers’ mounting
instructions.
14. Use only qualified technicians for all repairs.
15. Antenna must be kept away from power cord.
16. The external antenna must be connected to earth to prevent potential damage caused by voltage surge or ESD
(Electro Static Discharge).
17. Follow instructions when inserting batteries into the remote control unit. Discard all batteries appropriately.
18. Do not use mixed batteries (old and new, carbon-zinc and alkaline).
- 4 -
Contents
Introduction................................................................................................................................................. - 2 -
Safety considerations...................................................................................................................................- 3 -
Main functions......................................................................................................................................... - 5 -
Technical specification.............................................................................................................................- 6 -
Front panel of interactive display............................................................................................................ - 9 -
Rear view of interactive display.............................................................................................................- 10 -
RCU (Remote Control Unit)....................................................................................................................- 14 -
Introduction of OSD................................................................................................................................... - 15 -
Operation of OSD — How to choose source channel............................................................................- 15 -
Introduction of “Menu”......................................................................................................................... - 16 -
Connecting PC........................................................................................................................................ - 19 -
Troubleshooting.........................................................................................................................................- 20 -
- 5 -
The HDi multi-touch display is a combination of two advance technologies. The IR (Infrared) touch technology and high definition
(HD) digital display technology (MTS) creating the HD Interactive Android Version Multi Touch Screen (MTS). This combination
provides the user the ability to interact with an MTS screen using a finger or any solid object.
Main functions
Acute touch
The MTS is a high resolution touch displaying screen. Users interact with the MTS using finger, pen or other non-transparent
object.
HD display
The MTS is a high resolution display terminal, as a HD monitor.
- 6 -
Technical specification
size
55’’
65’’
OSD language
English
Panel
Resolution
Up to 1920X1080
Up to 1920X1080(standard)
Up to 3840 X 2160 (4K/2K)(optional)
AV
Color System
PAL / NTSC / SECAM
Composite (in)
1.0 Vp-p±5%@75ohm
Audio (in)
500mV rms
Analog RGB (PC)
Mode
Up to 1920X1080@60Hz
YPbPr/HDMI
Component
Y: 1.0Vp-p@75 Ω, PbPr: 0.7Vp-p@75 Ω
Support format
Up to 1080P
HDMI Format
HDMI 1.4 /HDCP 1.2
USB file system
FAT32, FAT16, NTFS (NTFS compressed file is not supported)
Input
terminals
CVBS/Audio
Input
1 X 3RCA (yellow, white, red)
YPbPr
1 X MINI3.5MM (three-in-one terminal)
USB input
2X USB 3.0-A (horizontal)
PC-RGB Input
1 X D-SUB 15Pin (blue)
PC Audio Input
1X 3.5mm Stereo audio-in jack
HDMI input
3 X HDMI-A (one in front)
RS232
1XRS232
Output terminals
AV OUT
1 X 3.5mm Stereo audio-in jack
Mobi OS™
specification
Processor
Mobi OS™ (Built on Android 5.0.1)
CPU
ARM A53×4 1.4GHz
GPU
ARM Mali450 MP4(4+2) 450MHz
RAM
2GB(4Gbit×4)；DDR3；1866MHz
ROM
16GB Build in EMMC
wifi
IEEE802.11 a/b/g/n Dual Band 5 GHz
SD CARD
Support MAX 32GB SD Card
RJ 45 port
1
Voltage range
AC(90～240)V-50/60HZ
Power consumption
Standby: <1W
Rated Consumption:
<150W
<220W
<250W
- 7 -
Technical Specification (continued)
size
75’’
84’’
OSD language
English
Panel
Resolution
Up to 3840 X 2160 (4K/2K)
Up to 3840 X 2160 (4K/2K)
AV
Color System
PAL / NTSC / SECAM
Composite (in)
1.0 Vp-p±5%@75ohm
Audio (in)
500mV rms
Analog RGB (PC)
Mode
Up to 1920X1080@60Hz
YPbPr/HDMI
Component
Y: 1.0Vp-p@75 Ω, PbPr: 0.7Vp-p@75 Ω
Support format
Up to 4K
HDMI Format
HDMI 1.4 /HDCP 1.2
USB file System
FAT32, FAT16, NTFS (NTFS compressed file is not supported)
Input
terminals
CVBS/Audio
Input
1 X 3RCA (yellow, white, red)
YPbPr
1 X MINI3.5MM (three-in-one terminal)
USB input
2X USB 3.0-A (horizontal)
PC-RGB Input
1 X D-SUB 15Pin (blue)
PC Audio Input
1X 3.5mm Stereo audio-in jack
HDMI input
3 X HDMI-A (one in front)
RS232
1XRS232
Output
terminals
AV OUT
1 X 3.5mm Stereo audio-in jack
Mobi OS™
specification
Processor
Mobi OS™ (Built on Android 5.0.1)
CPU
ARM A53×4 1.4GHz
GPU
ARM Mali450 MP4(4+2) 450MHz
RAM
2GB(4Gbit×4)；DDR3；1866MHz
ROM
16GB Build in EMMC
wifi
IEEE802.11 a/b/g/n Dual Band 5 GHz
SD CARD
Support MAX 32GB SD Card
RJ 45 port
1
Voltage range
AC(90～240)V-50/60HZ
Power
consumption
Standby: <1W
Rated Consumption:
<250W
<415W
<510W
- 8 -
Technical Specification (touch parameters)
Working temperature
0°C～40°C
Set up
As per this Operations Manual
Touch points
Single/Two/Four/Six points available
Writing mode
Finger, writing pen or any non-transparent object
Positioning technology
IR technology
Positioning accuracy
<2mm
Positioning resolution
4096*4096/16384*16384/32768*32768
Writing response time
<8ms
Cursor speed
>120 dot/sec
Communication port
USB
Operating system
WINDOWS/LINUX/MAC /Android
PC response
System auto response
Remark:
Above mentioned parameters are for standard models and are subject to change without notice.
Dimensions and weights
Note: Reference only
size
N.W. (KGS)
G.W(KGS)
Display size
Dimension(outline)
Dimension(package)
55’’
40±2KGS
53±2KGS
1209.6*680.4 mm
1283.5*781*81mm
1430*910*190mm(carton)
65’’
68±2KGS
84±2KGS
1428.5*803.5 mm
1547*936*93mm
1680*1050*220mm(carton)
75’’
82±2KGS
104±2KGS
1650*928mm
1714*1012*90mm
1845*1145*220mm(carton)
84’’
107±2KGS
125±2KGS
1860.48*1046.52mm
1942*1154*84mm
2084*1325*225mm(carton)
- 9 -
Front panel of interactive display
M-RCU receiver and button lamp
A-POWER (Turn On/Off) P-Android USB
B-Source (Source input) Q-PC USB
C-Menu R-HDMI 3
D-Volume+ S-TOUCH USB
E-Volume-
F-Channel+ L&N - Speaker
G-Channel-(Menu item+/-)
H-PC (Built-in OPS power On/Off key (If no OPS, no functions)
I-ES Turn (On/Off Energy-saving)
J-Enter (enter above choice)
K-Home (back to Android home screen)
X-Power in, AC110-220V
Y-Switch
Note: Front panel picture for reference only may differ from actual product
- 10 -
Rear view of interactive display
Note: Reference only may differ from actual product
Back I/O Ports T
Number
NAME
FUNCTION
1
PC USB
For external PC USB port transfer to front PC USB port
2
SPDIF
Coaxial output
3
RS232
serial communication transmission of data control
4
SD CARD
SD card slot, support max 32GB SD CARD
5
Headphone output
6
AV OUT
AV OUT
7
YPbPR
Coaxial output
8
AV IN
AV IN
Table des matières
Autres manuels HDI écran tactile
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
