Hayter Ranger 53 Pro Guide de l'utilisateur
English Version
FROM SERIAL NO: 396A001001 HANDBOOK: 396007 (REV.0.)
ISSUE 10.04.02
RANGER 53 PRO
CODE 396A
OWNER’S HANDBOOK
Direttore Generale
Alberto Cattaneo
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the
handlebars. CODE 396A (SG56 RC VAR PROF) = 12 ms-2...
EC DECLARATION OF CONFORMITY
SANDRIGARDEN
via Manzoni 22
36027 Rosa, Italia.
Declare that the lawnmower:
Models: Ranger 53 Pro
Machine Type No. CODE 396A (SG56 RC VAR PROF)
Category: Auto Drive/Variable Speed
Type: Pedestrian Rotary
Engine - Manufacturer: Briggs & Stratton
- Speed of rotation: 2900rpm
Width of cutting device: 520mm
Speed of rotation of the cutting device: 2900rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components.
Also Directive 89/336/EEC amended by 92/31/EEC Electromagnetic Compatibility.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors. (ANNEX VI)
Notified Body: NOVICOM SAS DI R. CASTELLI & CO. Via della Fontana 23804 Monte Marenzo (LC)
Notified body identification No: 0723
Measured sound power level: 98 dB(A)
Guaranteed sound power level: 100 dB(A)
Standards Used: EN292, EN836 and ENISO14982.
Authorised Signatory:
Signed Date: 10.04.02
Technical documentation kept at:
SANDRIGARDEN,
via Manzoni 22,
36027 Rosa, Italia.
396007AMT1004020
1.11.1 CONTENTS
Page No.
CONTENTS
INTRODUCTION.
WARRANTY.
SAFETY PRECAUTIONS.
Decals
SPECIFICATIONS.
ASSEMBLY INSTRUCTIONS.
General assembly.
Assembling the mower for the first time.
STARTING THE ENGINE.
Before starting the engine.
Starting the engine.
STOPPING THE ENGINE.
OPERATING THE MOWER.
Height of Cut.
Travel.
Turning the mower.
Mowing with grass collection.
Mowing without grass collection.
Heavy growth.
Moving the mower across non-grassed areas
Cutterbar operation.
Mowing and grass care tips.
MAINTENANCE.
Engine.
Grassbag.
Deck housing.
Securing nuts and bolts.
Lubrication.
Clutch cable adjustment.
Cutterbar.
Maintenance Schedule.
PREPARING THE MOWER FOR STORAGE.
FAULT FINDING.
396 PARTS LIST.
396 PARTS DIAGRAM.
ENGINE ANCILLARY PARTS
NOTES.
CUSTOMER INFORMATION.
1.2
1.3
1.4 - 1.7
1.7
1.8
1.9
1.9
1.10 - 1.12
1.13
1.13 - 1.14
1.15
1.16
1.16
1.17
1.18
1.18
1.19
1.20
1.20
1.20
1.21
1.21 - 1.22
1.23
1.23
1.23
1.23
1.24
1.24
1.24
1.25 - 1.26
1.27 - 1.28
1.29
1.30 - 1.31
2.1 - 2.4
2.5
2.6
2.7
2.8
396007AMT1004020
1.21.2
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you
gain safe and efficient service from your machine.
IMPORTANT: This Owners Handbook should be regarded as part of the machine as it
gives essential information regarding machine safety, operation, maintenance and
specifications. Read and understand this handbook prior to operating your machine for the
first time. Make sure you are familiar with all the controls and points of regular maintenance.
If you have any doubts, consult your Hayter authorised dealer who will be pleased to give
you assistance.
The mower is designed solely for use in a domestic grass cutting environment. Use in any
other way is considered as contrary to the intended use. Compliance with and strict adherence
to the conditions of operation, service and repair as specified in this handbook also constitute
essential elements of the intended use.
This mower should be operated, serviced and repaired only be persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures. The
safety precautions listed herein and all other generally recognised regulations on safety must
be observed at all times.
All Hayter mowers are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will
ensure a long and satisfactory service life. Prior to despatch from our factory every effort is
made to ensure your machine arrives in perfect condition. Your dealer will carry out a
pre-delivery inspection to ensure that there has been no transit damage prior to installation.
Please allow your dealer to familiarise you with the controls and safety features of the
machine during installation.
Throughout this handbook all references to left hand and right hand are as viewed from
behind the handlebar, facing in the direction of forward travel.
This owners handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to make changes at any time without notice.
INTRODUCTION
396007AMT1004020
1.31.3 WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in
material and workmanship under normal use and service for a period of one year from the date of
purchase. The manufacturers of the engine furnish their own warranty and services are provided
through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full
benefit of the warranty, the warranty registration card must be returned within 60 days of
purchase. Subject to the conditions and exlcusions noted in this limited warranty, we shall at our
option, repair or replace any warranted part during the applicable period. If you are in doubt or
experience any difficulty, please consult a Hayter Authorised Service Dealer for clarification.
A 90 day warranty period applies to those items which are subject to normal wear and tear e.g.
wheels, cutterbars, cables, grassbags and other consumable wearing parts.
All machines which are fitted with a genuine Hayter friction disc or crankshaft support bearing as
original equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake units and other such devices are not applicable. Only
machines fitted with a genuine Hayter friction disc or crankshaft support bearing, which are used
in accordance with the recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover for minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
To make a warranty claim, return the unit to a Hayter Authorised Service Dealer along with proof
of purchase stating the machine serial number and date of purchase. Subject to the conditions and
exclusions in this limited warranty, the authorised dealer will, at our option, repair or replace any
warranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages or
contact:- Freephone 0800 616298.
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
Training:
Read the instructions carefully. Ensure that you are familiar with the controls and the proper
use of the equipment. Learn how to stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to use the mower.
Never mow while people , especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards occurring to other people
or their property.
Preparation:
While mowing, always wear substantial footwear and long trousers. Do not operate the equip-
ment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove all objects which may
be thrown by the machine.
WARNING: Petrol is highly flammable.
-Store fuel in containers specifically designed for this purpose.
-Refuel outdoors only and do not smoke while refuelling.
-Add fuel before starting the engine. Never remove the cap from the fuel tank or add petrol
while the engine is running or when the engine is hot. Allow engine to cool for at least 2 min-
utes before refuelling.
-Do not attempt to start the engine if petrol is spilled or a smell of petrol is present but move
the mower away from the area of spillage and avoid creating any source of ignition until petrol
vapours have dissipated.
- Always use fresh fuel. Stale fuel can block the carburettor and cause leakage.
The Ranger 53 Pro is perfectly safe if used correctly. Failure to observe the
following simple precautions may result in serious injury.
THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED.
WHEN YOU SEE THIS SYMBOL BE ALERT TO THE POSSIBILITY OF
INJURY. CAREFULLY READ THE MESSAGE THAT FOLLOWS AND
INFORM OTHERS. EXERCISE GREAT CARE AND FOLLOW THE
ADVICE GIVEN TO AVOID POTENTIALLY HAZARDOUS SITUATIONS.
1.41.4
396007AMT1004020
1.51.5 SAFETY PRECAUTIONS
SAFETY PRECAUTIONS Continued.
Operation:
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can
collect.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine if the mower has to be tilted for transportation when crossing surfaces other
than grass and when transporting the mower to and from the area to be mowed.
Never operate the mower unless the guards are securely in position and in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the drive clutch before starting the engine.
- Replace all fuel tank caps and fuel container caps securely.
- Replace faulty exhaust and mufflers.
Always ensure that the mower is in a safe operating condition. Frequently check all nuts, bolts
and screws for tightness. Use only genuine Hayter replacement parts.
Damaged cutterbars and loose fixing bolts are major hazards. Before use, visually inspect the
cutting mechanism to ensure that it is in good condition. A damaged cutterbar must be replaced
immediately with a genuine Hayter replacement part. Cutterbars which are slightly worn can
be resharpened. Ensure that both cutting edges are resharpened equally to maintain balance.
An unbalanced cutterbar may cause serious damage to your machine.
Refer to "Maintenance."
SAFETY PRECAUTIONS
Operation continued:
Start the engine carefully, with feet well away from the cutterbar.
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry a mower while the engine is running.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
Stop the engine:
Do not lift the rear deflector whilst the mower is in operation.
- Whenever you leave the mower.
- Before refuelling.
- After striking a foreign object. Inspect the mower for damage and make repairs
before restarting and operating the mower.
- If the mower starts to vibrate abnormally ( check immediately ).
WARNING: THE CUTTERBAR CAN CONTINUE TO ROTATE
AFTER THE ENGINE IS SWITCHED OFF.
SAFETY PRECAUTIONS Continued.
1.61.6
396007AMT1004020
1.71.7 SAFETY PRECAUTIONS
SAFETY PRECAUTIONS Continued.
Maintenance and storage:
Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition.
Never store the mower with petrol in the tank within an enclosed area where fumes may reach
an open flame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine, silencer, and petrol storage area free of grass,
leaves, or excessive grease.
Check the grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety. Use genuine Hayter parts only.
If the fuel tank has to be drained, it is essential that this be done outdoors.
DECALS
WARNING DECAL:
DANGER OF BEING HIT BY THROWN OBJECTS.
KEEP BYSTANDERS AT A SAFE DISTANCE
FROM THE MACHINE.
WARNING - CAUTION RISK OF DANGER - SAFETY ALERT.
DANGER OF SEVERING TOES OR FINGERS
IN CUTTING MECHANISM.
STOP ENGINE AND REMOVE SPARK PLUG LEAD BEFORE
PERFORMING MAINTENANCE OR REPAIR WORK.
CAREFULLY READ THE OPERATORS MANUAL BEFORE
USING THE MACHINE.
DECAL :
HEIGHT OF CUT ADJUSTMENT
DECAL:
ENGINE STOP
DECAL: GROUND SPEED DECAL: THROTTLE CONTROL
Briggs & Stratton Intek Edge 60
121602-0166-E1
2900 rpm
Unleaded petrol.
1.5 litres
SAE 30 engine oil
0.6 litres
530mm
25 - 100mm
1700 x 600 x 1130mm
57.5 Kg
SPECIFICATIONS
SPECIFICATIONS
Engine
Engine type
Engine / cutterbar speed
Fuel type
Fuel capacity
Oil type
Oil sump capacity
Cutting width
Cutting height
Overall dimensions
Dry Weight
CODE 396(SG56 RC VAR PROF)
MODELS
1.81.8
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Hayter Tondeuse à gazon
Hayter
Hayter CODE613A Manuel utilisateur
Hayter
Hayter Jubilee 422V Guide de l'utilisateur
Hayter
Hayter Envoy 100A Guide de l'utilisateur
Hayter
Hayter Harrier 48 BBC Guide de l'utilisateur
Hayter
Hayter 005G Guide de l'utilisateur
Hayter
Hayter MT313 Manuel utilisateur
Hayter
Hayter M10/30 133E Manuel utilisateur
Hayter
Hayter Hawk 308A Guide de l'utilisateur
Hayter
Hayter 455E Manuel utilisateur
Hayter
Hayter H15/40 145S Manuel utilisateur
Hayter
Hayter Envoy Code 100C Guide de l'utilisateur
Hayter
Hayter R48 Mode d’emploi
Hayter
Hayter R53A Mode d’emploi
Hayter
Hayter Harrier 56 BBC Guide de l'utilisateur
Hayter
Hayter Harrier 48 Pro Guide de l'utilisateur
Hayter
Hayter Harrier 48/56 BBC 493F Guide de l'utilisateur
Hayter
Hayter 610 Manuel utilisateur
Hayter
Hayter Harrier 48 / 56 BBC Guide de l'utilisateur
Hayter
Hayter Harrier 41 410G Guide de l'utilisateur
Hayter
Hayter Harrier 41 Electric Guide de l'utilisateur
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Husqvarna
Husqvarna Poulan Pro PP185A42 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
