Hanna Instruments Checktemp series Manuel utilisateur

InstructionManual

Checktemp

Pocket-sized

Thermometers

with Cal-Check®

SPECIFICATIONS

Range

-50.0 to 150.0°C

-58.0 to 302.0°F

Resolution

0.1°C / 0.1°F

Accuracy

±0.3°C (-20 to 90°C)

±0.5°C (outside)

±0.5°F (-4 to 194°F)

±1°F (outside)

Typical EMC Deviation

±0.3°C / ±0.5°F

Environment

0 to 50ºC (32 to 122ºF);

RH max 95%

Battery Type

1 x 1.5V alkaline

Battery Life

approx. 3000 hours

of continuous use

Dimensions

66 x 50 x 25 mm

(2.6 x 2 x 1")

Weight

50 g (1.8 oz.)

WARRANTY

This meter is warranted for one year against defects in

workmanship and materials when used for its intended

purpose and maintained according to instructions.

This warranty is limited to repair or replacement free of

charge. Damages due to accident, misuse, tampering or

lack of prescribed maintenance are not covered.

If service is required, contact the dealer from whom you

purchased the instrument. If under warranty, report the

model number, date of purchase, serial number and the

nature of the failure. If the repair is not covered by the

warranty, you will be notified of the charges incurred.

If the instrument is to be returned to Hanna Instruments,

first obtain a Returned Goods Authorization Number from

the Customer Service department and then send it with

shipment costs prepaid.

When shipping any instrument, make sure it is properly

packaged for complete protection.

Recommendations for Users

Before using this product, make sure that it is entirely suit-

able for the environment in which it is used. Operation of

this instrument in residential areas could cause unaccept-

able interferences to radio and TV equipment. Any varia-

tion introduced by the user to the supplied equipment may

degrade the instrument’s EMC performance. To avoid elec-

trical shock, do not use these instruments when voltages at

the measurement surface exceed 24 VAC or 60 VDC.

To avoid damages or burns, do not perform any measure-

ment in microwave ovens.

www.hannainst.com

AVAILABLE MODELS

HI 98501

ChecktempC

(°C reading)

and HI 98502

ChecktempF

(°F read-

ing) are provided with a stainless-

steel penetration probe.

HI 98505

ChecktempLC

(°C reading)

and HI 98502

ChecktempLF

(°F read-

ing) are provided with a stainless-

steel probe for liquid measurement.

OPERATION

• Turn the meter ON.

• Dip the probe into the sample to be

measured. An immersion level of 4 cm

(1 ½") is recommended. Do NOT im-

merse above the connector.

• Wait for a few seconds for the display to

stabilize.

• When not in use, switch the meter OFF. ISTCKTMR2 06/05

• Variations in readings or fading display

can indicate a weak battery.

CALIBRATION CHECK®

Open the battery

cover and slide

down the Cal-

Check®switch.

The display should show 0.0°C ±0.3°C

or 32°F ±0.5°F. This assures the user that

the reading is reliable and accurate.

Contact your dealer or the nearest Hanna

Service Center for recalibration, if neces-

sary.

Slide the Cal-Check®switch back up and

close the battery cover. The meter returns

to measurement mode.

BATTERY REPLACEMENT

Whenthethermometercannotbeswitched

on or the display fades, open the battery

compartment(see pic-

ture) and replace the

1.5V battery, while

payingattention to its

polarity.

Reattach the battery

cover.

Battery should only be replaced in a safe

area using the battery type specified in this

instruction sheet.

MEASUREMENT

MODE

CALIBRATION

CHECK

MODE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hanna Instruments Thermomètre

Hanna Instruments

Hanna Instruments HI 148 Series Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98501-1 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI98197 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9057 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98701 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 93551R Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 92804 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 93551 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 149-00 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checktemp2 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checktemp-Dir HI 98510-01 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9040 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9041 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 9060 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 98701 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 8757 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI145-00 Manuel utilisateur

Hanna Instruments

Hanna Instruments Foodcare HI 93501 Manuel utilisateur

Hanna Instruments

Hanna Instruments Foodcare HI 93501 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 935005 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 955202 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 146-01 Manuel utilisateur

Hanna Instruments

Hanna Instruments HI 151-02 Manuel utilisateur

Hanna Instruments

Hanna Instruments Checktemp 1 Manuel utilisateur

Manuels Thermomètre populaires d'autres marques

Delton

Delton 981A Manuel utilisateur

Baker

Baker MM2P Manuel utilisateur

Tarmo

Tarmo 320281 Manuel utilisateur

Citizen

Citizen CTD 504 Manuel utilisateur

TFA

TFA 14.1500 Manuel utilisateur

Vive

Vive DMD1010 Manuel utilisateur

Gotemp

Gotemp THB4002 Manuel utilisateur

GREISINGER

GREISINGER G 1202 Manuel utilisateur

Amprobe

Amprobe TMD-53W Manuel utilisateur

Trotec

Trotec BP10 Manuel utilisateur

Radiance instruments

Radiance instruments RT616 Series Manuel utilisateur

Eurolec

Eurolec IR151 Manuel utilisateur

Scaneo

Scaneo TS42B Manuel utilisateur

Sper scientific

Sper scientific 800043 Manuel utilisateur

Microlife

Microlife NC 200 Mode d’emploi

Motorola

Motorola MBP69SN Guide de configuration

The MeatStick

The MeatStick The MeatStick Manuel utilisateur

Hama

Hama TH35-A Manuel utilisateur