Hach SensION+ pH3 Manuel utilisateur

Manual

Manual de instruções

Manuel d’utilisateur

操作手册

07/2010, Edition 1

07/2010, Edición 1

07/2010, Edição 1

07/2010, Edition 1

2010年7月，第一版

DOC022.97.90248

ENGLISHESPAÑOLFRANÇAIS

中文 PORTUGUÊSCONTACT

1. Technical Specifications .................. 2

2. General information..................... 3

2.1. Safety information .................... 3

2.1.1. Use of hazard information ......... 3

2.1.2. Precautionary labels .............. 3

2.2. General product information ............ 3

2.3. Instrument composition ............... 3

3. Installation ............................. 4

3.1. Assemblage ......................... 4

3.2. Connections ........................ 5

4. Operation .............................. 5

4.1. Description ......................... 5

4.2. Start-up ............................ 6

4.3. General diagram ..................... 6

4.4. pH and mV calibration ................. 7

4.5. pH and mV measurements .............. 8

4.6. Other options ....................... 8

4.7. Recognized buffers ................... 9

5. Maintenance ........................... 9

6.1. Clean the instrument .................. 9

6.2. Sensor cleaning ...................... 9

6. Warning messages ...................... 10

7. Accessories and spares. . . . . . . . . . . . . . . . . . . 10

8. Limited Warranty ....................... 11

Contact Information

Index

ENGLISH

1. Technical Specifications

Measuring ranges:

pH -2.00 to 19.99

mV ± 2000

Temp -20 to 150 ºC (-4 to 302 ºF)

Resolution

pH 0.01

mV 1

Temp 0.1 ºC (0.1 ºF)

Measuring error (± 1 digit)

pH 0.01

mV 1

Temp 0.2 ºC ( 0.4 ºF)

Reproducibility (± 1 digit)

pH ± 0.01

mV ± 1

Temp ± 0.1 ºC (± 0.1 ºF)

Automatic temperature compensation

Manual entrance.

With Pt 1000 temperature probe (A.T.C.).

With NTC 10 K probe.

pH calibration

With 1, 2 or 3 buffers selectable inside the range.

Automatic recognition of technical buffers pH 2.00, 4.01, 7.00,

9.21, 10.90, values at 25ºC (77ºC).

Programmable calibration validity between 0 h and 7 days.

Automatic recalibration warning.

Automatic rejection of electrodes in poor conditions.

Theoretical calibration.

pH calibration criteria

Asymmetry potential ± 58 mV.

Slope 41 to 62 mV/pH, at 25°C (77 °F)

(sensitivity 70 to 105 %).

mV calibration

Automatic recognition of redox standard 220 mV at 25ºC

(77 °F).

Measuring mode

By stability.

Continuous.

Languages

English, German, Spanish, French, Italian, and Portuguese.

Display

Graphic, backlit liquid crystal, 128 x 64 dots.

Inputs and outputs

Combined or indicator electrode, BNC connector (Imp. >1012 ).

Reference electrode, banana connector.

A.T.C. type Pt 1000, banana or telephonic connector.

Stirrer, RCA connector.

Ambient conditions

Working temperature 5 to 40 ºC (41 to 104 ºF).

Storage temperature -15 to 65ºC (5 to 149ºF).

Relative humidity < 80% (not condensed).

Power supply

External plug-in power supply 100-240 VAC 0.4 A 47-63 Hz.

Materials

Enclosure, ABS and PC.

Keypad, PET with protective treatment.

Physical parameters

Weight: 1100 g.

Size: 350 x 200 x 110 mm.

Version Electrode Accessories Manual

LPV2000.97.0002 –– 3 3

LPV2010T.97.002 LZW5010T.97.002 3 3

LPV2011T.97.002 LZW5011T.97.002 3 3

LPV2014T.97.002 LZW5014T.97.002 3 3

LPV2021T.97.002 LZW5021T.97.002 3 3

Electrical equipment marked with this symbol may not be dis-

posed of in European public disposal systems after 12 August of

2005. In conformity with European local and national regulations

(EU Directive 2002/96/EC), European electrical equipment users

must now return old or end-of life equipment to the Producer for

disposal at no charge to the user.

Note: For return for recycling, please contact the equipment

producer or supplier for instructions on how to return end-of-

life equipment, producer-supplied electrical accessories, and all

auxiliary items for proper disposal.

2. General information

As a result of constant improvements to our products sometimes

differences may exist between this manual and the instructions

supplied with the instrument.

2.1. Safety information

Please, read carefully this information before installing and using

the instrument !

Pay attention to all danger and caution statements.

2.1.1. Use of hazard information

DANGER

Indicates a potentially or imminently hazardous situation

that, if not avoided, will result in death or serious injury.

WARNING

Indicates a potentially or imminently hazardous situation

that, if not avoided, may result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation that, if not

avoided, may result in minor or moderate injury.

Important note: Indicates a situation that, if not

avoided, could lead to damage to the instrument.

Important information that requires special emphasis.

Note: Information that supplements points in the main

text.

2.1.2. Precautionary labels

Read carefully all labels and tags attached to the instrument.

Accessories:

- Buffer solutions, 135 ml flasks.

- Magnetic stirrer.

- Calibration flasks, with magnetic bar inside.

- Electrolyte for the electrode, KCl 3M, 50 ml flask.

- Plug-in power supply.

- Electrode’s stick and support.

2.2. Description

The

sensION™+PH 3

is an instrument to measure pH, mV or

temperature.

2.3. Instrument composition

ENGLISH

3. Installation

DANGER

Only qualified personnel, following the local security regulations, should conduct the tasks described in this section of the

manual.

3.1. Assemblage

1. Unpack the instrument.

Note: Stirrer replacement

Before replacing the stirrer, disconnet it from the rear panel and

release the cable from the bottom of the instrument.

3. Drive the stick into the

hole.

4. Turn the shift in a

counterclockwise until

the stick is well fixed.

Place the o-ring at

135-140 mm from the

base in order to avoid

the shock of the sensor

against the bottom of

the glass.

5. Place the electrode’s

support on the stick by

softly pressing the

button.

Holder for 3 sensors.

PN= LZW9321.99

6. Place the electrode on

the electrode’s support.

Insert the electrode’s

cable through the

groove.

1. Turn the stirrer to

release or fix from base.

2. Pull up the stirrer and

replace it.

Place the cable of the

new stirrer through the

bottom groove of the

instrument.

2. Verify that the shift is in

the same position than

in the picture.

140

3. Installation 4. Operation

1. Magnetic stirrer, RCA connector.

2. Combined pH electrode (or indicator), BNC connector.

3. Reference electrode (measuring with separated electrodes),

banana connector.

4. Temperature probe for the electrodes version T, banana

connector.

5. Separated temperature probe, telephone connector.

6. Plug-in power supply (12 V).

3.2. Connections

DANGER

Make sure the power adapter matches your local power

supply.

4.1. Description

Keys

Switch on / Switch off.

pH measurement.

mV measurement.

Calibration and calibration data.

Select between temperature (˚C, ˚F) and stirrer (St) to

modify the temperature or the stirring speed.

Selection of numeric values.

Access to:

- Language.

- Date and hour.

- Display contrast.

- Calibration frequency.

ENGLISH

STIRRER

pH / mV

ELECTRODE

REFERENCE

ELECTRODE

Pt 1000

PROBE

Pt 1000

PROBE POWER IN

2 431 5 6

Press

simultaneously

10-04-2010 17:15

24˚C

New CAL. in 12 h

ADJUST CONTRAST

Contrast

∆∆∆∆∆∆∆∆∆∆∆∆

CALIBRATION

pH, press pH

mV, press mV

CAL. data, press

CALIBRATION pH

Use first buffer

Press

CALIBRANTION mV

Use standard 220 mV

Press

MEASURING

by stability

pH * * * *

19˚C

t: 10 s

MEASURING

by stability

* * * *

Time: 10 s

MEASURING

in continuous

pH 12.20

29˚C

Time: 10 s

DATE AND TIME

10-04-2010 17:15:45

10-04-2010 17:15

MT 21°C

10-04-2010 17:15

MT 21°C

LANGUAGE SELECTION

English

Deutsch

Español

Français

Italiano

SN: 71502 V 1.0

LANGUAGE SELECTION

English

Deutsch

Español

Français

Italiano

LANGUAGE SELECTION

English

Deutsch

Español

Français

Italiano

Português

10-04-2010 17:15

2 5 ˚ C

CALIBRATE pH

SN: 71502 V 1.0

10-04-2010 17:15

2 5 ˚ C

New CAL in 12 h

4.3. General diagram

This is a general view over the way to access to all possibilities of

the instrument:

- DISPLAY CONTRAST

- LANGUAGE

- DATE AND TIME

- CHANGE OF TEMPERATURE UNITS

- pH AND mV CALIBRATION

- pH AND mV MEASUREMENT

4. Operation

4.2. Start-up

Connect to the rear panel of the instrument:

- the pH electrode

- the temperature probe (A.T.C.) built-in the pH electrode or

as separated sensor

- the magnetic stirrer

- the plug-in power supply

Follow the next steps:

For the first time...

Successive times...

Instrument switched off.

Press the keys to accept the

selected language.

Press

Wait 3 seconds.

Calibrate with buffer solutions.

Autres manuels pour sensION+ pH3

Table des matières

Autres manuels Hach Instrument de mesure

Hach

Hach HQ1110 Manuel rapide

Hach

Hach PAT700 DS Manuel rapide

Hach

Hach Lange CL17 Manuel utilisateur

Hach

Hach sensION+ EC5 Manuel utilisateur

Hach

Hach POCKET COLORIMETER II Manuel utilisateur

Hach

Hach sensION MM340 Manuel utilisateur

Hach

Hach HQd Manuel rapide

Hach

Hach 2100Q Manuel rapide

Hach

Hach HQ440d Manuel rapide

Hach

Hach Lange DR 3900 Manuel utilisateur

Hach

Hach Hach SL1000 Manuel rapide

Hach

Hach sensION+ Manuel utilisateur

Hach

Hach 5410001 Manuel utilisateur

Hach

Hach QC8500 Series 2 Manuel utilisateur

Hach

Hach NA5600 sc Na+ Manuel utilisateur

Hach

Hach AMTAX sc Manuel utilisateur

Hach

Hach 9523sc Manuel utilisateur

Hach

Hach A1000 Manuel rapide

Hach

Hach REFO 3 Manuel utilisateur

Hach

Hach sensION+ DO6 Manuel utilisateur

Hach

Hach AMTAX sc Manuel utilisateur

Hach

Hach sensION+ EC5 Manuel utilisateur

Hach

Hach Polymetron 9610sc Mode d'emploi

Hach

Hach 9525sc Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Hach sensION+ pH3 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques