Hach HQ1110 Manuel rapide

DOC022.97.80629

HQ1110, HQ1130, HQ1140,

HQ2100, HQ2200, HQ4100,

HQ4200, HQ4300

02/2022, Edition 3

Basic User Manual

Manuel d'utilisation de base

Manual básico del usuario

Manual Básico do Usuário

基本用户手册

基本取扱説明書

기본 사용 설명서



Table of Contents

English..............................................................................................................................3

Français......................................................................................................................... 22

Español.......................................................................................................................... 43

Português...................................................................................................................... 63

中文................................................................................................................................. 83

日本語........................................................................................................................... 100

한국어........................................................................................................................... 119

.................................................................................................................................. 138

Table of Contents

1 Online user manual on page 3

2 Product overview on page 3

3 Specifications on page 4

4 General information on page 5

5 Installation on page 7

6 Startup on page 12

7 User interface and navigation on page 13

8 Operation on page 16

9 Meter settings on page 18

10 Probe settings on page 19

11 Data management on page 19

12 Maintenance on page 20

13 Troubleshooting on page 21

14 Replacement parts on page 21

Section 1 Online user manual

This Basic User Manual contains less information than the User Manual, which is available on the

manufacturer's website.

Section 2 Product overview

The HQ Series portable meters are used with digital Intellical1 probes to measure one or more water

quality parameters. Refer to Figure 1. The meter automatically recognizes the type of probe that is

connected. The meter can connect to a PC or USB storage device to transfer data that is saved in

the meter. The optional Hach Communication Dongle (HCD) connects the meter to Claros™.

The HQ Series portable meters are available in eight models. Table 1 shows the types of probes that

can connect to each model.

Figure 1 Product overview

1 Micro-USB connector 4 Keypad

2 LED indicator 5 Intellical probe ports (three probe-port option

shown)

3 Display

1IntelliCAL® is a registered trademark of Hach Company in the U.S.A.

English 3

Table 1 HQ Series meter models

Meter

model

Probe

connectors

pH/mV/ORP2

probes

LDO/LBOD3

probes

Conductivity4

probes

ISE5

probes

HQ1110 1 ✔

HQ1130 1 ✔

HQ1140 1 ✔

HQ2100 1 ✔ ✔ ✔

HQ2200 2 ✔ ✔ ✔

HQ4100 1 ✔ ✔ ✔ ✔

HQ4200 2 ✔ ✔ ✔ ✔

HQ4300 3 ✔ ✔ ✔ ✔

Section 3 Specifications

Specifications are subject to change without notice.

Specification Details

Dimensions (L x W x H) 22 x 9.7 x 6.3 cm (8.7 x 3.8 x 2.5 in.)

Weight HQ1110, HQ1130, HQ1140 and HQ2100: 519 g (18.3 oz); HQ2200:

541 g (19.1 oz); HQ4100: 530 g (18.7 oz); HQ4200: 550 g (19.4 oz);

HQ4300: 570 g (20.1 oz)

Enclosure rating IP67 with battery compartment installed

Power requirements

(internal)

Rechargeable lithium-ion battery 18650 (18-mm diameter x 65-mm

length, cylindrical), 3.7 VDC, 3200 mAh; Battery Life: > 1 week with

typical use (10 readings/day, 5 days/week in Continuous or Push to

read mode, or > 24 hours in Interval mode with 5 minute intervals and

shutdown timer ≤ 15 minutes)

Power requirements

(external)

Class II, USB power adapter: 100–240 VAC, 50/60 Hz input; 5 VDC at

2 A USB power adapter output

Meter protection class IEC Class III (SELV (Separated/Safety Extra-Low Voltage) powered);

USB power adapter is IEC Class II (double-insulated)

Operating temperature 0 to 60 °C (32 to 140 °F)

Charging temperature 10 to 40 °C (50 to 104 °F)

Operating humidity 90% (non-condensing)

Storage temperature –20 to 60 °C (–4 to 140 °F) maximum 90% relative humidity (non-

condensing)

Probe connector 5-pin M12 connector for Intellical probes

Micro-USB connector The micro-USB connector enables USB cable and USB power

adapter connectivity.

2pH/mV/ORP probes include temperature

3LDO/LBOD probes include temperature

4Conductivity probes include salinity, TDS (total dissolved solids), resistivity, temperature

5Ion-selective probes such as ammonia, nitrate, chloride, fluoride, sodium

4 English

Specification Details

Data log (internal) HQ1000 Series: 5000 data points; HQ2000 Series: 10,000 data

points; HQ4000 Series: 100,000 data points

Data storage Automatic storage in Push to read and Interval modes. Manual

storage in Continuous mode.

Data export USB connection to PC or USB storage device (limited to the storage

device capacity)

Temperature correction Off, automatic and manual (parameter-specific)

Certifications CE, UKCA, FCC, ISED, RCM, KC, ETL Verified: US DOE/ NRCan

Energy Efficiency, RoHS

Warranty HQ1000 and HQ2000 series: 1 year (US), 2 years (EU);

HQ4000 series: 3 years (US), 3 years (EU)

Section 4 General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential

damages resulting from any defect or omission in this manual. The manufacturer reserves the right to

make changes in this manual and the products it describes at any time, without notice or obligation.

Revised editions are found on the manufacturer’s website.

4.1 Safety information

The manufacturer is not responsible for any damages due to misapplication or misuse of this product

including, without limitation, direct, incidental and consequential damages, and disclaims such

damages to the full extent permitted under applicable law. The user is soley responsible to identify

critical application risks and install appropriate mechanisms to protect processes during a possible

equipment malfunction.

Please read this entire manual before unpacking, setting up or operating this equipment. Pay

attention to all danger and caution statements. Failure to do so could result in serious injury to the

operator or damage to the equipment.

Make sure that the protection provided by this equipment is not impaired. Do not use or install this

equipment in any manner other than that specified in this manual.

4.2 Use of hazard information

D A N G E R

Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING

Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death

or serious injury.

CAUTION

Indicates a potentially hazardous situation that may result in minor or moderate injury.

N O T I C E

Indicates a situation which, if not avoided, may cause damage to the instrument. Information that

requires special emphasis.

English 5

4.3 Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or damage to the instrument

could occur if not observed. A symbol on the instrument is referenced in the manual with a

precautionary statement.

Electrical equipment marked with this symbol may not be disposed of in European

domestic or public disposal systems. Return old or end-of-life equipment to the

manufacturer for disposal at no charge to the user.

4.4 Product components

Make sure that all components have been received. Refer to Figure 2. If any items are missing or

damaged, contact the manufacturer or a sales representative immediately.

Figure 2 Product components

1 Rechargeable lithium-ion battery 7 USB port plug

2 Battery compartment 8 Optional power plugs

3 Meter 9 USB power adapter

4 Hand lanyard 10 USB cable, Type A to micro, 1 m (3.3 ft)

5 Probe connector plugs 11 Optional Hach Communication Dongle

(HCD)

6 Screwdriver (#1 Phillips)

4.5 Certification

Canadian Radio Interference-Causing Equipment Regulation, ICES-003, Class B:

Supporting test records reside with the manufacturer.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

6 English

Cet appareil numérique de classe B répond à toutes les exigences de la réglementation canadienne

sur les équipements provoquant des interférences.

FCC Part 15, Class "B" Limits

Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC

Rules. Operation is subject to the following conditions:

1. The equipment may not cause harmful interference.

2. The equipment must accept any interference received, including interference that may cause

undesired operation.

Changes or modifications to this equipment not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment. This equipment has been tested

and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which case the user will be required to

correct the interference at their expense. The following techniques can be used to reduce

interference problems:

1. Move the equipment away from the device receiving the interference.

2. Reposition the receiving antenna for the device receiving the interference.

3. Try combinations of the above.

4.6 Hach Communication Dongle (optional)

The optional Hach Communication Dongle (HCD) uses Bluetooth®6 Low Energy to communicate with

Claros™. Follow all manufacturer guidance and warnings to install and operate the device. Refer to

the documentation that is supplied with the HCD.

4.7 Intended use

CAUTION

Chemical exposure hazard. Obey laboratory safety procedures and wear all of the

personal protective equipment appropriate to the chemicals that are handled. Refer to

the current safety data sheets (MSDS/SDS) for safety protocols.

The HQ Series portable meters are intended for use by individuals who measure water quality

parameters in the laboratory or in the field. The HQ Series meters do not treat or alter water.

Section 5 Installation

D A N G E R

Multiple hazards. Only qualified personnel must conduct the tasks described in this

section of the document.

6The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG,

Inc. and any use of such marks by HACH is under license.

English 7

5.1 Lithium battery safety

WARNING

Fire and explosion hazard. Lithium batteries may get hot, explode or ignite and cause

serious injury if exposed to abuse conditions.

• Do not use the battery if there is visible damage.

• Do not use the battery after strong shock or vibration occurs.

• Do not expose the battery to fire or ignition.

• Keep the battery at temperatures less than 70 °C (158 °F).

• Keep the battery dry and away from water.

• Prevent contact between the positive and negative battery terminals.

• Do not let unauthorized persons touch the battery.

• Discard the battery in accordance with local, regional and national regulations.

• Do not use or store the instrument in direct sunlight, near a heat source or in high temperature

environments such as a closed vehicle in direct sunlight.

5.2 Install the battery

WARNING

Fire and explosion hazard. This equipment contains a high energy lithium battery which

can ignite and cause fire or explosion, even without power. To maintain the safety

provided by the instrument enclosure, the instrument enclosure covers must be installed

and secured with the supplied hardware.

WARNING

Explosion and fire hazard. Battery substitution is not permitted. Use only batteries that

are supplied by the instrument manufacturer.

Only use the manufacturer-supplied lithium-ion rechargeable battery. Refer to Figure 3 for battery

installation or removal.

8 English

Figure 3 Battery installation and removal

5.3 Charge the battery

D A N G E R

Electrocution hazard. If this equipment is used outdoors or in potentially wet locations, a

Ground Fault Circuit Interrupt (GFCI/GFI) device must be used for connecting the

equipment to its main power source.

WARNING

Fire hazard. Use only the external power supply that is specified for this instrument.

WARNING

Electrical shock hazard. Externally connected equipment must have an applicable

country safety standard assessment.

Use the supplied USB cable and USB power adapter or a PC to charge the battery. Refer to

Figure 4. When the instrument connects to power and the on/off key is pushed, the green LED

indicator is on. The user can operate the instrument while the battery charges. A battery with no

charge becomes fully charged after approximately 5 hours when the USB power adapter is used and

the instrument power is off.

English 9

Figure 4 Connect to the USB power adapter or a PC

10 English

Autres manuels pour HQ1110

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Hach Instrument de mesure

Hach

Hach 9523sc Manuel utilisateur

Hach

Hach LANGE LICO 500 Manuel utilisateur

Hach

Hach BioTector B3500s Manuel utilisateur

Hach

Hach 2100Qis Manuel utilisateur

Hach

Hach Surface Scatter 7 Manuel utilisateur

Hach

Hach DR2400 Manuel utilisateur

Hach

Hach H128 Manuel utilisateur

Hach

Hach POCKET COLORIMETER II Manuel

Hach

Hach sc100 1720E Manuel utilisateur

Hach

Hach QbD1200 AutoSampler Manuel utilisateur

Hach

Hach H125 Manuel utilisateur

Hach

Hach DR1300 FL Manuel utilisateur

Hach

Hach NA5600 sc Na+ Manuel utilisateur

Hach

Hach Pocket Pro Manuel utilisateur

Hach

Hach LOC 100 Manuel utilisateur

Hach

Hach sensION3 Guide de référence

Hach

Hach 2200 PCX Manuel rapide

Hach

Hach 500sc SiO2 Mode d’emploi

Hach

Hach sension ph31 Manuel utilisateur

Hach

Hach BioTector B3500C Manuel utilisateur

Hach

Hach PHC725 Manuel utilisateur

Hach

Hach polymetron 9240 Manuel utilisateur

Hach

Hach ANATEL PAT700 Manuel utilisateur

Hach

Hach LANGE LOC 100 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur