Hach QbD1200+ Manuel utilisateur
DOC022.97.80647
QbD1200+
09/2021, Edition 1
User Manual
用户手册
取扱説明書
사용 설명서
使用手冊
Table of Contents
English..............................................................................................................................3
中文................................................................................................................................. 24
日本語............................................................................................................................. 44
한국어............................................................................................................................. 65
.................................................................................................................................... 86
繁體中文...................................................................................................................... 106
2
Table of Contents
1 Product overview on page 3
2 Specifications on page 4
3 General information on page 5
4 Installation on page 8
5 User interface and navigation on page 11
6 Startup on page 13
7 Operation on page 14
8 Maintenance on page 19
9 Troubleshooting on page 20
10 Replacement parts and accessories
on page 22
Section 1 Product overview
The QbD1200+ TOC analyzer uses UV/Persulfate oxidation and NDIR detection for TOC analysis in
aqueous samples. This instrument is used in laboratories to measure pharmaceutical and drinking
water from 0.4 ppb to 100 ppm. The instrument has a built-in operating system that is controlled by a
touch screen or by an optional USB keyboard and mouse. The instrument is made for use with an
auto sampler. Refer to the auto sampler documentation for more information. Refer to Figure 1 and
Figure 2 for product features.
Figure 1 Product overview
1 Power button 5 Power connection
2 Touch screen display 6 Gas inlet port
3 Ethernet port 7 USB port
4 USB ports (2x) 8 Access door latch
English 3
Figure 2 Hydraulic connections overview
1 Syringe pump 6 Plumbing connections map
2 Ozone filter 7 Reagent bottle
3 Reagent tube 8 UV reactor
4 Sample tube 9 Drain tube
5 Removable drip tray 10 GLS (Gas Liquid Separator) water vessel
Section 2 Specifications
Specifications are subject to change without notice.
Specification Details
Dimensions (W x D x H) 32 x 51 x 41 cm (12.6 x 20.0 x 16.2 in.)
Weight 14 kg (31 lb)
Protection class III
Installation category I
Power requirements 12 VDC, 6.0 A maximum
Altitude 3048 m (10,000 ft) maximum
Operating temperature 5 to 35 ºC (41 to 95 ºF)
Relative humidity 0 to 90%, non-condensing
Storage temperature 5 to 40 ºC (41 to 104 ºF)
Range 0 to 100 ppm TOC
Accuracy ± 3% ≥ 500 ppb
4 English
Specification Details
Precision 2% RSD or 3 ppb (the larger value)
Oxidation UV/persulfate
Detection NDIR
Display 264.2 mm (10.4 in.) color touch screen
Air supply High purity air, oxygen or nitrogen; 684.4 kPa (100 psi) maximum air
pressure
Certifications Conforms to 21 CFR 11, USP <643>, JP <2.59>, EP <2.2.44>, IP, CP,
KP and EPA method 415.3 and Standard Method 5310C; CE mark
Host I/O Ethernet port
Warranty 1 year
Section 3 General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.
3.1 Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product
including, without limitation, direct, incidental and consequential damages, and disclaims such
damages to the full extent permitted under applicable law. The user is soley responsible to identify
critical application risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
3.1.1 Intended use
The QbD1200+ TOC analyzer is intended for use by individuals who measure water quality
parameters in the laboratory. The instrument does not treat or alter water.
3.1.2 Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate injury.
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that
requires special emphasis.
English 5
3.1.3 Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the instrument
could occur if not observed.
This symbol, if noted on the instrument, references the instruction manual for operation
and/or safety information.
This symbol indicates the presence of mercury. Components that contain mercury must
be disposed in accordance with all applicable local and regional law.
This symbol indicates a potential pinch hazard.
This symbol identifies a risk of chemical harm and indicates that only individuals qualified
and trained to work with chemicals should handle chemicals or perform maintenance on
chemical delivery systems associated with the equipment.
Electrical equipment marked with this symbol may not be disposed of in European
domestic or public disposal systems. Return old or end-of-life equipment to the
manufacturer for disposal at no charge to the user.
3.1.4 Icons used in illustrations
Manufacturer supplied parts Look Read the user manual
3.1.5 Product hazards
D A N G E R
Chemical or biological hazards. If this instrument is used to monitor a treatment process
and/or chemical feed system for which there are regulatory limits and monitoring
requirements related to public health, public safety, food or beverage manufacture or
processing, it is the responsibility of the user of this instrument to know and abide by any
applicable regulation and to have sufficient and appropriate mechanisms in place for
compliance with applicable regulations in the event of malfunction of the instrument.
CAUTION
Chemical exposure hazard. The UV lamp assembly of this instrument contains mercury.
Remove the UV lamp assembly before instrument disposal. Obey local, state and federal
law regulations for disposal of the UV lamp assembly.
CAUTION
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
6 English
3.1.6 Compliance and certification
CAUTION
This equipment is not intended for use in residential environments and may not provide adequate
protection to radio reception in such environments.
Canadian Radio Interference-Causing Equipment Regulation, ICES-003, Class A:
Supporting test records reside with the manufacturer.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de classe A répond à toutes les exigences de la réglementation canadienne
sur les équipements provoquant des interférences.
FCC Part 15, Class "A" Limits
Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC
Rules. Operation is subject to the following conditions:
1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This equipment has been tested
and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.
3.2 Product components
Make sure that all components have been received. Refer to Figure 3. If any items are missing or
damaged, contact the manufacturer or a sales representative immediately.
Note: The use of cables longer than 3 m (9.8 ft) can cause decreased electromagnetic immunity performance of
the equipment.
English 7
Figure 3 Product components
1 Analyzer 4 Power supply
2 Power cord 5 Gas inlet tube
3 Reagent bottle (empty) 6 GLS water vessel
Section 4 Installation
CAUTION
Multiple hazards. Only qualified personnel must conduct the tasks described in this
section of the document.
4.1 Installation guidelines
CAUTION
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
CAUTION
Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local,
regional and national regulations.
WARNING
Fire hazard. This product is not designed for use with flammable liquids.
N O T I C E
This instrument is sensitive to electromagnetic and electromechanical interference. These
interferences may have an effect on the analysis performance of this instrument. Do not put this
instrument near equipment that may cause interference.
8 English
Install the instrument:
• Indoors in a clean, dry, well-ventilated and temperature-controlled location
• In a location with a flat surface to prevent the unit from movement
• In a location with minimum mechanical vibrations and electronic noise
• In a location with no electromagnetic interferences from equipment such as transmitters, power
switching, etc.
• In an environmental enclosure that supplies protection from precipitation and direct sunlight
• In a location where there is sufficient clearance to make plumbing and electrical connections
• In a location where the display is easily seen by the user
• In a location with a compatible waste container for the drain tube
4.2 Plumbing
4.2.1 Install the GLS water vessel
Add water to the GLS water vessel as shown in the illustrated steps that follow. Open the instrument
door to do the procedure.
After each sample tray, examine the water level in the GLS water vessel to make sure that the vessel
is not more than half full. If the vessel is more than half full, remove some of the water to prevent a
possible overflow.
English 9
4.2.2 Plumb the sample and the drain tubes
Plumb the sample tube to an auto sampler (or a manual sample container) and plumb the drain tube
to the waste container as shown in the illustrated steps that follow.
4.2.3 Install the reagent bottle
Refer to the reagent preparation kit documentation to prepare the reagent solution. After the reagent
solution is prepared, connect the reagent tubing to the reagent bottle as shown in the illustrated steps
that follow.
10 English
Table des matières
Langues :
Autres manuels Hach Instrument de mesure
Hach
Hach QbD1200 AutoSampler Manuel utilisateur
Hach
Hach POCKET COLORIMETER II Manuel utilisateur
Hach
Hach ORBISPHERE 3655 Manuel utilisateur
Hach
Hach sensION+ pH3 Manuel utilisateur
Hach
Hach Pocket Pro Manuel utilisateur
Hach
Hach TU5300 sc Manuel rapide
Hach
Hach Lange CL17 Manuel utilisateur
Hach
Hach H135 miniLab Manuel utilisateur
Hach
Hach POCKET COLORIMETER II LCK 325 Guide de l'utilisateur
Hach
Hach DR 1900 Manuel rapide
Hach
Hach DR/700 Guide de référence
Hach
Hach IntelliCAL ISENH3181 Series Manuel utilisateur
Hach
Hach AMTAX sc Manuel utilisateur
Hach
Hach EZ Series Manuel rapide
Hach
Hach LANGE LOC 100 Manuel utilisateur
Hach
Hach DR2400 Manuel utilisateur
Hach
Hach HQ440d Manuel rapide
Hach
Hach TU5400 sc Manuel rapide
Hach
Hach sensION+ EC71 Manuel utilisateur
Hach
Hach ISENO3181 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur